3 replies to this topic

[Flying Dutchman]

Hi!

 

How do I add .mp4´s or static DMD images on my 3rd screen in PinballY! to be shown in attrackt mode?

Is it possible to capture media on a 3rd screen with PinballY!?

 

Thanks in advance!

 

Cheers,

FD.

 

Attached Files

•  BBH 1.png   1.04MB   0 downloads

[Tesla]

I don't know about a video.mp4, but it should already be showing the captured screen-3 static images during Attract-Mode by default.

 

Those files would just be along side the others for the table in question.

 

http://mjrnet.org/pi...diaCapture.html

Edited by Tesla, Yesterday, 02:21 PM.

[Flying Dutchman]

I don't know about a video.mp4, but it should already be showing the captured screen-3 static images during Attract-Mode by default.

 

Those files would just be along side the others for the table in question.

 

http://mjrnet.org/pi...diaCapture.html

Thanks Tesla ..

Yes it should capture by default.

 

When I look at the PinballY! folder I can see it did capture a DMD when I was using 2 screens - DMD on backglass (attached pics.), although it did not capture the DMD correcty (it captured a ´dmd-sized´ part of the playfield instead).

 

Now with a 3 screen setup it stopped capturing the DMD all together.

 

Cheers,

FD.

Attached Files

•  PinballY - DMD - 2.png   16.14KB   0 downloads
•  PinballY - DMD - 1.png   2.48KB   0 downloads
•  PinballY - DMD - 3.png   649.33KB   0 downloads

[Tesla]

I'll try to boot up my cabinet later and grab some relevant screenshots for you.

 

But for now ... be sure your 3 screens are set properly in PinballY (and all are set to "Full-Screen").

That initial arrangement seems to dictate how the 3-captured-screens (for each table) are displayed (for wheel-browsing and Attract-Mode) and well as regions used during captures. 

Edited by Tesla, Today, 03:57 PM.