Jump to content



Photo
- - - - -

Should my real DMD show as a 3rd monitor?

real dmd PinDMD virtuapin

  • Please log in to reply
5 replies to this topic

#1 83lowrider

83lowrider

    Hobbyist

  • Members
  • PipPip
  • 27 posts

  • Flag: United States of America

  • Favorite Pinball: guns n roses

Posted 06 October 2026 - 02:05 PM

Under Windows 11 "Display" I am only showing 2 monitors... the playfield and the backglass.

Google AI says that is normal but at least 3 how-to videos say the real DMD will show as

another monitor. Can anyone with a real DMD confirm or deny this?

 

The DMD is described by the maker as "The PinDMD v3.1 is a full-color dot matrix display

powered by ZeDMD, manufactured and sold by Virtua Pin Cabinets."

 

 

 

 



#2 Tesla

Tesla

    Pinball Fan

  • Silver Supporter
  • 1,540 posts
  • Location:Texas, USA

  • Flag: United States of America

  • Favorite Pinball: Star Trek - TNG

Posted 06 October 2026 - 03:03 PM

Google says this:

 

The PinDMD v3.1 sold by VirtuaPin is an all-in-one, full-color dot matrix display that runs on ZeDMD hardware and firmware under the hood.
Key Details
• Price: $229.95
• Resolution/Size: Standard pinball DMD dimensions (80mm x 320mm) supporting full 24-bit RGB color.
• Compatibility: Works plug-and-play via USB (WINUSB) and integrates seamlessly with virtual pinball setups using Freezy's DMD Extensions (dmd-extensions) for Visual Pinball and VPX.
• Features: Supports up to 60 FPS, firmware updates, and virtual alphanumeric DMD rendering without requiring paid activation files or registration
 
---------------
 
Which seems to align with this:
 
 
---------------
 
That thread indicates it shows as a Com-port (not a Monitor) in Windows Device Manager. 
 
--------------
 
Here is another thread that might be relevant:
 

Edited by Tesla, 06 October 2026 - 03:04 PM.


#3 Redwings13

Redwings13

    Enthusiast

  • Platinum Supporter
  • 320 posts
  • Location:Near Detroit, Mich

  • Flag: United States of America

  • Favorite Pinball: Circus by Brunswick

Posted 06 October 2026 - 05:40 PM

I’m using a pinDMD v3, mine does not show it as a 3 screen 



#4 83lowrider

83lowrider

    Hobbyist

  • Members
  • PipPip
  • 27 posts

  • Flag: United States of America

  • Favorite Pinball: guns n roses

Posted 10 October 2026 - 02:20 PM

 

Google says this:

 

The PinDMD v3.1 sold by VirtuaPin is an all-in-one, full-color dot matrix display that runs on ZeDMD hardware and firmware under the hood.
Key Details
• Price: $229.95
• Resolution/Size: Standard pinball DMD dimensions (80mm x 320mm) supporting full 24-bit RGB color.
• Compatibility: Works plug-and-play via USB (WINUSB) and integrates seamlessly with virtual pinball setups using Freezy's DMD Extensions (dmd-extensions) for Visual Pinball and VPX.
• Features: Supports up to 60 FPS, firmware updates, and virtual alphanumeric DMD rendering without requiring paid activation files or registration
 
---------------
 
Which seems to align with this:
 
 
---------------
 
That thread indicates it shows as a Com-port (not a Monitor) in Windows Device Manager. 
 
--------------
 
Here is another thread that might be relevant:
 
 
 

 

Thanks for that. Yes, the DMD has always shown under Device Manager as being on COM port 8

with no issues. I played endlessly with the ini file in order to enable it as such. And while I didn't

expect it to be listed under Win11 Display Properties as a monitor, there's been a video or two

<of many> that I watched saying/showing their DMD as a third monitor. Apparently there were 

not using a real DMD, or they simply misspoke. Either way, I pulled it out. Too much frustration

over something that should be bringing me joy and memories of my friend. A couple options

remain... using the 32" backglass monitor for now to display the virtual DMD and get things

running, enjoy the table for a bit as I hopefully gain more knowledge. Then maybe try to re-install.

 

More likely, find a lcd monitor to replace it with as it sure looks empty! I made a post about a possible

replacement monitor for the DMD, and will wait to see what, if any, opinions others may have on

using such a monitor. Shame tho, as I did enjoy the look of the real DMD, as it took me back

to my favorite era of playing pinball, which was the years of my owning a pool/game room, which

I sold in 1999. Tho I've played pinball since I was a kid (10 cents a game, 3 for a quarter), my pool

room era was the prime of my life, where I met my friend, met my wife, etc. I think he'd rather have

me enjoying it rather than cursin' at it.   Thanks for the time you've given me, this old man appreciates it!



#5 Tesla

Tesla

    Pinball Fan

  • Silver Supporter
  • 1,540 posts
  • Location:Texas, USA

  • Flag: United States of America

  • Favorite Pinball: Star Trek - TNG

Posted 10 October 2026 - 05:22 PM

1. Yes, the DMD has always shown under Device Manager as being on COM port 8

with no issues.

 

2. there's been a video or two that I watched saying/showing their DMD as a third monitor. Apparently they were 

not using a real DMD,

 

3. Too much frustration

over something that should be bringing me joy and memories of my friend.

 

I think he'd rather have

me enjoying it rather than cursin' at it.   

 

4. Thanks for the time you've given me, this old man appreciates it!

 

 

1. Good

 

2. Most likely. Most of us little LCD-monitors for our DIY cabinets (because they are cheap and you can get them anywhere).

 

3. Try to think of it as a puzzle. Take your time ... there is no rush or schedule.

 

4. Sure thing. We were all newbies once. I feel like you kinda got dropped into the deep-end.


Edited by Tesla, 11 October 2026 - 12:24 AM.


#6 Tesla

Tesla

    Pinball Fan

  • Silver Supporter
  • 1,540 posts
  • Location:Texas, USA

  • Flag: United States of America

  • Favorite Pinball: Star Trek - TNG

Posted 11 October 2026 - 12:03 AM

1. I played endlessly with the ini file in order to enable it as such. 

 

 

2. integrates seamlessly with virtual pinball setups using Freezy's DMD Extensions (dmd-extensions) for Visual Pinball and VPX

 

 

 

 

1. I skimmed-over the info on those links... it showed various ways "to send it stuff" ... not pinball stuff but just enough to be sure it was installed properly and communicating.

 

2. So, the way this line reads ... you need Freezy's DMD Extensions installed and working.

AFAIK, to use those on a table, you have to Enable them in F1 (vPinMame options). This isn't a "PinDMD thing" it's a normal VPX procedure.







Also tagged with one or more of these keywords: real dmd, PinDMD, virtuapin