No replies to this topic

[cwheel7]

Hi.  I just wired up my newly purchased chimes & I've run into an issue that has me stumped.  I'm currently running 3X 8 channel SainSmart boards.  The two running my solenoids and knocker are working fine in VPX 10.8, DOF 64 bit.  However my Chimes do not work.  The chimes are recognized using the SainSmart Relay tool.  And they work the DOF testing tool.  I'm fairly certain that I have assigned the ports & generated the config file correctly on VPuniverse.  My question is, could it be the fact that I'm using 3 of the same make board and my system is confused?  Each has their own config id.  Do I need to rename the chime config file?  Also, each board is assigned a different comm port under device manager.  When I disconnected the two pre-existing boards, the Chimes began to work though for some reason my left flipper would trigger a chime.  Does anyone know how to go about getting all 3 boards to work in unison?  Any insight would greatly be appreciated.  Thank you in advance for your help.

 

 

2023.10.30 14:14:47.010    FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[0], name=FT245RBitbangController 0, description: FT245R USB FIFO, serial #AL03MDJT
2023.10.30 14:14:47.010    Detected and added FT245RBitbangController Id 0 with name FT245RBitbangController 0
2023.10.30 14:14:47.010    Added LedwizEquivalent Nr. 40 with name FT245RBitbangController 0 Equivalent 1 for PacUIO with Id 0
2023.10.30 14:14:47.010    FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[1], name=FT245RBitbangController 1, description: FT245R USB FIFO, serial #AQ02IK70
2023.10.30 14:14:47.010    Detected and added FT245RBitbangController Id 1 with name FT245RBitbangController 1
2023.10.30 14:14:47.010    Added LedwizEquivalent Nr. 41 with name FT245RBitbangController 1 Equivalent 1 for PacUIO with Id 1
2023.10.30 14:14:47.010    FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[2], name=FT245RBitbangController 2, description: FT245R USB FIFO, serial #A10MEL39
2023.10.30 14:14:47.010    Detected and added FT245RBitbangController Id 2 with name FT245RBitbangController 2
2023.10.30 14:14:47.010    Added LedwizEquivalent Nr. 42 with name FT245RBitbangController 2 Equivalent 1 for PacUIO with Id 2
2023.10.30 14:14:47.010    Cabinet auto configuration finished

Edited by cwheel7, 31 October 2023 - 09:58 AM.