153 replies to this topic

[robertms]

That does look great!  Question: what the heck is the "pincushion effect", first time I hear that term!

It’s a form of optical distortion.

[arngrim]

beautiful and plays great!

 

i updated the dof, here is an add for the rgb undercab toy to be dynamic like the gi :

 

Sub UpdateGI(no, Enabled)

If Enabled Then

dim xx

For each xx in GI:xx.State = 1: Next

For each xx in Plastics:xx.BlendDisableLighting = .41: Next

batleft.BlendDisableLighting = .11:batright.BlendDisableLighting = .11:batright1.BlendDisableLighting = .11

Primitive35.BlendDisableLighting = .11:Primitive36.BlendDisableLighting = .11 'sling cover

Primitive11.BlendDisableLighting = .11:Primitive12.BlendDisableLighting = .11

l66.BlendDisableLighting = .11:l67.BlendDisableLighting = .11

Wall26.BlendDisableLighting = .15 'ramp decal

Primitive45.BlendDisableLighting = .21 : Primitive46.BlendDisableLighting = .31' drive 65

donut.BlendDisableLighting = .11 ' donut heaven

dome1.BlendDisableLighting = .15:dome2.BlendDisableLighting = .15:dome3.BlendDisableLighting = .15 ' traffic lights

supercharger_p.BlendDisableLighting = .20:superramp_p.BlendDisableLighting = 1 ' supercharger and ramp

refL.opacity=7:refR.opacity=7

        PlaySound "fx_relay"

DOF 101, DOFOn

Else

For each xx in GI:xx.State = 0: Next

For each xx in Plastics:xx.BlendDisableLighting =0: Next

batleft.BlendDisableLighting =0:batright.BlendDisableLighting =0:batright1.BlendDisableLighting =0

Primitive35.BlendDisableLighting =0:Primitive36.BlendDisableLighting =0 'sling cover

Primitive11.BlendDisableLighting = 0:Primitive12.BlendDisableLighting = 0

l66.BlendDisableLighting =0:l67.BlendDisableLighting =0

Wall26.BlendDisableLighting = 0 'ramp decal

Primitive45.BlendDisableLighting = 0 : Primitive46.BlendDisableLighting = 0 ' drive 65

donut.BlendDisableLighting = 0 ' donut heaven

dome1.BlendDisableLighting = 0:dome2.BlendDisableLighting = 0:dome3.BlendDisableLighting = 0 ' traffic lights

supercharger_p.BlendDisableLighting = 0:superramp_p.BlendDisableLighting = 0 ' supercharger and ramp

refL.opacity=0:refR.opacity=0

        'PlaySound "fx_relay"

DOF 101, DOFOff

End If

End Sub

 

and another fix

 

Sub SolRampUp(Enabled)

    If Enabled Then

        Controller.Switch(54) = False

        RampaMovil.Collidable = False

        playsound SoundFX("fx_diverterUp",DOFContactors)

div_ramp.ObjRotY=15

ramptrig=0

    End If

End Sub

 

Sub SolRampDown(Enabled)

    If Enabled Then

        Controller.Switch(54) = true

        RampaMovil.Collidable = True

        playsound SoundFX("fx_diverterUp",DOFContactors)

div_ramp.ObjRotY=0

ramptrig=1

    End If

End sub

[gStAv]

What a difference in the physics! Awesome. Also lowered the friction on the flippers so the ball would be harder to cradle. Plays great now 

[kds70]

 

beautiful and plays great!

 

i updated the dof, here is an add for the rgb undercab toy to be dynamic like the gi :

 

...

 

 

Hi arngrim, since your last DOF Update the middle bumper isn´t working with dof i think; getting no response from contactor anymore. Same to the traffic light targets maybe - not sure.

 

The bumper which isn´t working is named bumper_3 in the script (should be activated there with "vpmTimer.PulseSw(63)"

 

Or am i wrong with something ? (updated the last table update 1.03 and dof table configs).

 

Greedings, Kai

Edited by kds70, 26 October 2017 - 07:30 PM.

[arngrim]

that's strange, seems fine on my side, do you have error on dof logs?

[kds70]

that's strange, seems fine on my side, do you have error on dof logs?

 

No, seems all fine ..., mmmmh, curious. Someone else has noticed middle bottom bumper isn´t working ?

 

 

2017.10.26 22:07:53.501    DirectOutput Logger initialized
2017.10.26 22:07:53.501    DirectOutput Version 0.9.6184.23828 as of 2016.12.06 13:14
2017.10.26 22:07:53.501    Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2017.10.26 22:07:53.501    Loading Pinball parts
2017.10.26 22:07:53.501    Loading cabinet
2017.10.26 22:07:53.503    Will load cabinet config file: C:\DirectOutput\config\Cabinet.xml
2017.10.26 22:07:53.777    1 output controller defnitions and 1 toy definitions loaded from cabinet config.
2017.10.26 22:07:53.777    Cabinet config loaded successfully from C:\DirectOutput\config\Cabinet.xml
2017.10.26 22:07:53.777    Cabinet loaded
2017.10.26 22:07:53.777    Loading table config
2017.10.26 22:07:53.778    Warning: No table config file found. Will try to load config from LedControl file(s).
2017.10.26 22:07:53.778    Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName gw_l5
2017.10.26 22:07:53.781    Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini
2017.10.26 22:07:53.788    Min DOF Version is 0.8 for file directoutputconfig.ini
2017.10.26 22:07:54.162    1 directoutputconfig.ini or ledcontrol.ini files loaded.
2017.10.26 22:07:54.164    Config for RomName gw_l5 exists in LedControl data. Updating cabinet and config.
2017.10.26 22:07:54.207    Warning: Skipped setting 1 in column 5 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.207    Warning: Skipped setting 2 in column 5 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.207    Warning: Skipped setting 3 in column 5 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 4 in column 5 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 5 in column 5 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 6 in column 5 for LedWizEqivalent number 1 since |T@ is not a valid color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 7 in column 5 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 8 in column 5 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 1 in column 6 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 2 in column 6 for LedWizEqivalent number 1 since |T@ is not a valid color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 3 in column 6 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.208    Warning: Skipped setting 4 in column 6 for LedWizEqivalent number 1 since it does not contain a color specification.
2017.10.26 22:07:54.208    Table config loading finished
2017.10.26 22:07:54.208    Pinball parts loaded
2017.10.26 22:07:54.209    Starting processes
2017.10.26 22:07:54.209    Initializing cabinet
2017.10.26 22:07:54.209    Debug: Initializing output controllers
2017.10.26 22:07:54.220    PinControl PinControl 1 intialized and updater thread started.
2017.10.26 22:07:54.220    Debug: Output controllers initialized
2017.10.26 22:07:54.222    PinControl PinControl 1 updater thread  started.
2017.10.26 22:07:54.225    Cabinet initialized
2017.10.26 22:07:54.227    PinControl PinControl 1 updater thread  has connected to PinControl PinControl 1.
2017.10.26 22:07:54.230    Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2017.10.26 22:07:54.286    Framework initialized.
2017.10.26 22:07:54.286    Have fun!
 

Edited by kds70, 26 October 2017 - 08:16 PM.

[kds70]

Took a backup tablemappings.xml and directoutput.config from 21-10-2017 and middle bumper / traffic light targets are working with contactors as it should.

 

So it´s not my mistake . Updatet DOF early in the morning and all was fine. Updated now in the evening; and had these mistakes ...

 

Maybe something went corrupt in DOF tablesettings at the config site ?

Edited by kds70, 26 October 2017 - 08:38 PM.

[Ebster]

on my side dof is strange with the update as well...

 

i have a yellow rgb flasher that is on all the time.

 

the knocker knocks when it shouldn't.

 

three of four pushbutton lights stay off.

[Ben Logan]

I really like the POV ganja uses on this table. Especially like the lit sidewalls which provide a real sense of depth.

[sifusun]

Thx so much for your beautiful work!!!!!!!!!!!!

 

Thx to all involved!!!

[arngrim]

there was a typo in the 8 contactor config, i have a 10 contactor config (like i recommend to everybody... ) and the issue was no present there

 

fixed now, please confirm

[ganjafarmer]

Nice, i'll update table to 1.04 later today, i found some more little bugs and added some little stuff also.

 

 

Now some little gypsy talk:

 

I don't want to force any of you guys, but you can donate me by doing nothing for a while

 

With the link from my signature you can mine some hashes for me using your CPU, it's totally safe and legit so if you got few minutes for download the table, maybe you got few minutes for the authors.

 

Btw. any crypto guys here?

[Slydog43]

I will let my cab run for a while for you.................................  About 70 h/sec.   I used to mine, but got out after build a 10 blade rig, but bitcoin was only around $350.  wow wish I had continued soooooo bad.   btw how many hases/sec do you get with a dedicated asic?

Edited by Slydog43, 27 October 2017 - 06:23 PM.

[ganjafarmer]

Thanks man.

 

There is no ASICs for Monero right now.

 

I'm helping my friend with L3+ Antminers (Litecoin ACIS miners)

 

If you wan't some data go to nicehash.com and check profitability calculator.

[Slydog43]

So that site was very cool, setup another machine to mine for a day and I will see how it goes.  Another reason I want solar at my house as I think that is the only way to make money.  Good luck, thanks for an awesome table!!!!  Hope you continue with another masterpiece when done with HS2

[shannon1]

Thanks for this super cool table! Loads of fun to play....I suggest grabbing one of the great remixes for this table off of Pinsound depending on your musical taste.

[RustyCardores]

I will let my cab run for a while for you.................................  About 70 h/sec.   I used to mine, but got out after build a 10 blade rig, but bitcoin was only around $350.  wow wish I had continued soooooo bad.   btw how many hases/sec do you get with a dedicated asic?

It's rather off topic, but huge rigs are required to make decent coin from just mining IMO, the money is in mining a broad portfolio of lower value stocks and reaping the benefit of their potential growth.  It is a "market investors" game now and not dissimilar to investing in regular stocks.... and yes, solar does help to keep outgoings down. Thankfully I have 10kw on the roof and power is not an issue to run rigs in a 24/7 air-conditioned room.

[kds70]

there was a typo in the 8 contactor config, i have a 10 contactor config (like i recommend to everybody... ) and the issue was no present there

 

fixed now, please confirm

 

works now - thanks for your support arngrim. have a nice weekend

[Ebster]

@arngrim: everything fine here as well, thanks a lot! maybe one request... would it be possible for you to add a shaker effect for the supercharger?

 

@ganjafarmer: respect and many thanks for the table. i own the getaway, it sits right next to my vpin and you really did a great job!!!!! just could you turn off the flippers while racing on the dmd?

 

best regards.

[arngrim]

Have to check, what is the supercharger?

Envoyé de mon SM-A320FL en utilisant Tapatalk