21 replies to this topic

[xenonph]

So here is the fix for this table, if you are using VPX8 Beta.

 

Open the table script, and starting on Line 295 you will see this...

 

SolCallback(7) = "dtbank1..SolHit 1,"
SolCallback(8) = "dtbank1..SolHit 2,"
SolCallback(9) = "dtbank1..SolHit 3,"
SolCallback(10) = "dtbank1..SolHit 4,"
SolCallback(11) = "dtbank1..SolHit 5,"

 

You need to remove one of the periods between dtbank1..SolHit 1 on each Line for SolCallback7 through 11. (Lines 295 through 299)

So it will look like this when you are done...

 

SolCallback(7) = "dtbank1.SolHit 1,"
SolCallback(8) = "dtbank1.SolHit 2,"
SolCallback(9) = "dtbank1.SolHit 3,"
SolCallback(10) = "dtbank1.SolHit 4,"
SolCallback(11) = "dtbank1.SolHit 5,"

 

Now the table works in VPX8Beta.

 

Info provided by the great JPSalas, so you can thank him!

[almendras11]

Abra el script de la tabla y, a partir de la línea 295, verá esto...

 

SolCallback(7) = "dtbank1..SolHit 1,"
SolCallback(8) = "dtbank1..SolHit 2,"
SolCallback(9) = "dtbank1..SolHit 3,"
SolCallback(10) = "dtbank1..SolHit 4,"
SolCallback(11) = "dtbank1..SolHit 5,"

 

Debe eliminar uno de los puntos entre dtbank1..SolHit 1 en cada línea para SolCallback7 a 11. (Líneas 295 a 299)

Así se verá así cuando hayas terminado...

 

SolCallback(7) = "dtbank1.SolHit 1,"
SolCallback(8) = "dtbank1.SolHit 2,"
SolCallback(9) = "dtbank1.SolHit 3,"
SolCallback(10) = "dtbank1.SolHit 4,"
SolCallback(11) = "dtbank1.SolHit 5,"

Cambiando eso se quita el error yo lo solucione

Esto está publicado en la descarga del backglass de universe