Thanks Mike for a fantastic game it plays really well. Will be a favourite table. Great fun
Edited by mattbini, 15 October 2017 - 08:38 PM.
Posted 15 October 2017 - 09:10 PM
Hi all,
The table looks fantastic and plays very well.....for whatever reason I get no ROM sounds. I get all the playfield sounds like the ball rolling and ball going down ramp sounds etc. When I click on End to open the coin door to raise the ROM volume the DMD displays " Sound board interface error".
I tried re-downloading the ROM and overwriting the same one in my ROM folder with the same result. I also noticed the same problem with my VP9 version of this table as well. Maybe the VP9 version was always like this too and I didn't look into it at the time. Memory fails me.
Anyone else having this problem? Sure would be great to hear the game sounds/music.
Would this be somehow related to the Ddraw=1 issue mentioned a few posts up? I've never had to do that before so not sure at this point how to go about that? Thought I'd at least ask if that could be the issue first. Pardon my ignorance.
Posted 15 October 2017 - 11:52 PM
Posted 16 October 2017 - 07:00 AM
Looks great and plays good, one great slug fist, though I can't help but question the end angle / flipper arc was it really like that on the real machine?
Posted 16 October 2017 - 09:55 AM

Posted 16 October 2017 - 01:03 PM
Thank Michael for taking the time to respond.....I've tried both of your suggestions,deleting the NVRAM file and tried resetting during a game...neither had any effect....still no ROM sounds during play. I wonder, I'm going to rename and try a different ROM next,if possible.Hi Johngreve,
the ROM seems to be a bit picky sometimes. You can try to delete Your current state, saved within the nvram file:
..\Visual Pinball\pinmame\nvram\cp_16.nv
Or press F3 during a game to reset the ROM.
Regards
Michael
Edited by Johngreve, 16 October 2017 - 02:48 PM.
Posted 16 October 2017 - 02:47 PM
From now on. I won't help anyone here at VPF. Please ask Noah why that is.
Posted 16 October 2017 - 02:50 PM
Try my nvram file
https://www.dropbox....h/cp_16.nv?dl=0
Edited by Johngreve, 16 October 2017 - 03:03 PM.
Posted 16 October 2017 - 03:26 PM
No, I guess I'll have to search the internet to find that out. I find it kind of weird that this is happening to you. I wrote a wiki about how to reset a table to "default".
http://vpinball.com/...ble-to-default/
You could always try to follow that one. I don't write in detail how to edit the vpreg.stg file. I don't think you need to, but, I should probably update that wiki to tell that the tool itself is available here at *** and it involved putting a *.exe into \vpinmame\users folder and then run it ... find the game name and choose delete.
Uh. Did a quick update to the wiki about the tool - but, as I say. I don't thnk you need it in this case. I can't be sure, but, deleting the registry for this table + using my nvram file should get you up and running on vp_16 rom ![]()
Edited by Thalamus, 16 October 2017 - 03:34 PM.
From now on. I won't help anyone here at VPF. Please ask Noah why that is.
Posted 16 October 2017 - 04:48 PM
Hi,
maybe re-downloading the cp_16 ROM could help.
Michael
Hi StevOz,
Thalamus mentioned the flippers to be too long and I adjusted the with version 1.1. I tried to match the alignment holes in the playfield too.
If You have any suggestions, corrections or complaints, please post or PM them.
Michael
Posted 16 October 2017 - 06:28 PM
Ups ... I hope you didn't feel that me sharing the changes I've made to this table as insult. It surely wasn't meant as such !
I said it was primarily the angle I found to be a bit too high. Easier to share the whole table than to explain my preference.
I have nothing else than good things to say about your release.
Edited by Thalamus, 16 October 2017 - 06:30 PM.
From now on. I won't help anyone here at VPF. Please ask Noah why that is.
Posted 16 October 2017 - 06:49 PM
ddraw fixed it, i forgot this old trick
here's my update, for rgb undercab dynamic

Posted 16 October 2017 - 07:16 PM
Hi Thalamus,
You are welcome. Thank You for the effort to point things out so well. My post was meant to encourage You guys to mention any findings to help me correcting things I overlooked.
Arngrim: thanks for the adtional DOF calls. They will be implemented in the next release.
Hanzoverfist: that must have been a rare occasion of a ball jumping up onto that ramp. I added a way to allow such balls to roll down the scoop again.
Regards
Michael
Edited by mfuegemann, 16 October 2017 - 07:18 PM.
Posted 17 October 2017 - 01:52 AM
Michael,.... first thanks for doing this....
going thru the table I noticed lots of the materials being used are old out of date materials with the blacks (clearcoat) are not set to true black, and this will make objects look washed out.... this also goes for images like the PF and plastics.... these also needed to be color corrected so the "black" were true black.... the result is a much sharper, cleaner look to the table.... in the pic bellow all these were corrected as well as adjusting the lights to match the other tables in my cab... if you want this to compare let me know
thanks again

Posted 17 October 2017 - 07:56 AM
Typically Williams tables of this era had a swing arc of about 52 degrees, the start angle of the flippers seem fine, it is the end angle that need the adjustments and maybe the flippers at 126 are perhaps slightly longer then they should be maybe 124 would be better.
I have adjusted the end angle of the left flipper to 68 and the end angle of the right flipper to 292, which seems to work well, though the flipper physics may need a few tweaks also as they seem to be a little too powerful.
* reduced flipper strength to 2400
Edited by StevOz, 17 October 2017 - 09:37 AM.
Posted 17 October 2017 - 07:30 PM
Thanks Michael, thanks also Hauntfreaks and all the Help here,
today had a bit Time and few Games ... really cool, now i can stay at home, and not go to Bars and boxing with someone /joke ![]()
Fun Table and great Work here ![]()