It should be, you volunteering as a guinea pig?
I wouldn't try this on anything solenoid-related right now given the early days of this code.
Currently the UIO is auto detected, and not added in cabinet.xml. I'm guessing your PacLed64s are also auto detected, using something like directoutputconfig20.ini + directoutputconfig21.ini? Mine is directoutputconfig27.ini for instance as I had to pick a range that was not being used in the source. A second UIO would be xxx28.ini.
It's still early days since eventually I have to get in touch with the original developer of DOF, then DOF Config Tool, to see how they want the support added. But lights / outputs are being fired off, from a modified DOF Config Tool XML based on PacLed64.
Got a reply from Ultimarc support that the PacDrive SDK supports two UIO devices. I'm going to modify the DOF sources / "ultimateio" branch tomorrow after work for 2 devices, do some pinball, then let you know how things work. I only have a SainSmart 8ch USB + UIO, no PacLed64, so testing this on PacLed64 + UIO would be really great. Give me a few days and I'll let you know how things go.
Side story: I just got 10x 24VDC Siemens contactors today, but no 24v to power it. LEDs don't care if software crashes, which did happen a few days ago; I had the UIO crash on me in a frozen output state (all outputs on) because the USB cable got slightly loose during a test where I activated all outputs. It was powered off a USB hub, so shutdown of PC didn't help because it was running on its own. Not because of DOF, or code, but the PC lost communication with UIO and the UIO was running on its own. Had to unplug power. If I had my solenoids hooked up, I'm not sure they'd last the 60 seconds of panic at the time.
Edited by rambo3, 24 November 2016 - 09:55 PM.