4 replies to this topic

[batch]

File Name: Rollergames Zedonius Requlem FS Batch_MOD

File Submitter: batch

File Submitted: 03 May 2016

File Category: VP 9.x Cabinet Tables (FULL SCREEN)

Author(s): Zedonius
Requlem
CyBORG & MrHide
Bodydump
Batch
Manufacturer: Williams
Year: 1990
ROM: Link to ROM
Permission to MOD?: Yes, with approval

1.1 - Added metal post with rubber between flippers (below "SKATE AGAIN"), replaced wire by small bar (left lane) like on real pinball. Thanks to Zany for information
       
       Set flashers colour to white. Thanks to JPSalas for telling me
      
       Updated flippers settings (thanks to StevOz) except the following :
 
       LeftFlipper & RightFlipper : Oblique Correction -> 3 instead of 1.2 (for me, the ball didn't go towards the center of the table), but you can set it to 1.2 if you prefer
 
       Flipper1 : Physics remain the same except for Recoil Velocity -> 4 (because for me, it was too difficult to throw the ball to the Wall of Death)
 
       If you prefer them, here is the table with StevOz settings :
 

 
 
1.0 - This is the FS version of my table "Rollergames Zedonius Requlem DT Batch_MOD"

The original table is from Zedonius

Here is what I did :

New apron, new ramps & wires (primitives), new plastics (the pit, middle left & right and transparency on left & right lanes)

new plunger, Williams logo on flippers, added side rails, replaced lateral targets by circular models, replaced lights by Flashers

Big thanks to JPSalas for telling me how to set the Flashers in the Script and to Freneticamnesic for his help and method to convert FPinball ramps to VPinball
 
I also added the following in the script :
 
         'Set Controller = CreateObject("B2S.Server")  for lucky cabinet owners
 
         .Hidden = False 'True if you use a backglass and don't want to see the DMD
          Controller.Games("rollr_l2").Settings.Value("rol") = 1   '0 for DT version    
         '.SetDisplayPosition 0, 0, GetPlayerHWnd
         .Games("rollr_l2").Settings.Value("dmd_width") = 70    '230 for DT version
         .Games("rollr_l2").Settings.Value("dmd_height") = 230  '70 for DT version

 
Credits go to :

Zedonius : original table
Requlem : Rollergames FS 1.3 HD 1.3
CyBORG & MrHide : scripts
Bodydump : HD playfield
Freneticamnesic : method to convert FPinball ramps to VPinball
JPSalas : Flashers in the Script
Zany : image "Zany_Chrome" applied to metallic ramps

Click here to download this file

[obstler42]

thanks for these!

 

do you know how to lower the volume in those tables? for some reason it is much louder than the other tables, and I haven't figured out how to lower the volume...

[ta2686]

thanks for these!

 

do you know how to lower the volume in those tables? for some reason it is much louder than the other tables, and I haven't figured out how to lower the volume...

Try this:

 

  - Click on the DMD window

  - Press the key to the left of the 1 key on the keyboard (tilde key on English keyboards). A white box should open in the DMD window

  - Using the up and down arrow keys scroll through the options until you find a channel you need to adjust

  - Using the left and right arrow keys adjust the volume of the channel - left arrow lowers the volume right arrow raises the volume

  - Repeat the above two steps to adjust other channels

  - When done press the key to the left of the 1 key on the keyboard to close the white box

  - Click anywhere on the table to return focus to the table

 

I do not guarantee that this will work for you.  Hope this helps.

[obstler42]

thx so much, that worked perfectly!


Sent from my iPhone using Tapatalk

[obstler42]

 

thanks for these!

 

do you know how to lower the volume in those tables? for some reason it is much louder than the other tables, and I haven't figured out how to lower the volume...

Try this:

 

  - Click on the DMD window

  - Press the key to the left of the 1 key on the keyboard (tilde key on English keyboards). A white box should open in the DMD window

  - Using the up and down arrow keys scroll through the options until you find a channel you need to adjust

  - Using the left and right arrow keys adjust the volume of the channel - left arrow lowers the volume right arrow raises the volume

  - Repeat the above two steps to adjust other channels

  - When done press the key to the left of the 1 key on the keyboard to close the white box

  - Click anywhere on the table to return focus to the table

 

I do not guarantee that this will work for you.  Hope this helps.

 

 

While I reported earlier that it works fine, the changes in volume are not saved, and have to be redone each time the table is started. Is there a way to make those changes persist across restarts?