52 replies to this topic

[jpsalas]

The Flintstones VP91x v1.02FS



Version: 1.0.2
Category: VP 9.x Cabinet Tables (FULL SCREEN)

Author(s): jpsalas

Description:
Based on the table by Williams from 1994
This is the FS version.
As always, angle independet, higher resolution graphics...

1.01 updated 25 Feb 2011
- fixed some lane animations (thanks Axioma)
- now it is possible to nudge the ball out of the middle lower ramp if it gets stuck there.
- tried to fix a slow ball getting stuck on the left ramp. But I'm not sure if it is better now.
- added missing light decal (thanks Flying Dutchman)

1.02 Updated 11 March 2011
- Fixed ball getting stuck on the left ramp

View File

Submitted by jpsalas, on Feb 24 2011, 06:24 AM

Edited by jpsalas, 11 March 2011 - 10:23 AM.

[gStAv]

Thanks for this!

Didn´t think this table could look any better!!!
You´re a true artiste JP! *hats off*

[chriz]

AWESOME²

[DedRok_V]

Just magic

[Sheltemke]

Thank you for your work Jpsalas

I love this table so much, sometimes i play on my workplace too with this(ssh...dont tell to my boss )

[mwong168]

I love this table so much, sometimes i play on my workplace too with this(ssh...dont tell to my boss )

Your boss doesn't notice your monitor turned sideways or why your head is tilted while you are pretending to be working hard? I've gotten pretty good at playing pinball horizontally at my office haha

Thanks again JP!

Edited by mwong168, 24 February 2011 - 05:24 PM.

[Flying Dutchman]

Great release!!
I've got this Table for real .. found it under the Christmas Tree .. nice gameplay, lot's of action!

LOVE IT!! Thanks again JPSalas!

I've started to redo the UVP for it ..

Cheers,
FD.

Edited by Flying Dutchman, 24 February 2011 - 05:39 PM.

[settingsons]

You rock!

[Axioma]

Hello.
A big thank you to those tables that are truly extraordinary.
The angle of view is great.
And thank you also to the developer of Visual Pinball.

Just a small note at the switches.

Sub sw75_Hit:la9.IsDropped = 1:Controller.Switch(75) = 1:PlaySound "sensor":End Sub
Sub sw75_UnHit:la9.IsDropped = 0:Controller.Switch(75) = 0:End Sub

Sub sw66_Hit:la10.IsDropped = 1:Controller.Switch(66) = 1:PlaySound "sensor":End Sub
Sub sw66_UnHit:la10.IsDropped = 0:Controller.Switch(66) = 0:End Sub

Sub sw67_Hit:la4.IsDropped = 1:Controller.Switch(67) = 1:PlaySound "sensor":End Sub
Sub sw67_UnHit:la4.IsDropped = 0:Controller.Switch(67) = 0:End Sub

Sub sw68_Hit:la11.IsDropped = 1:Controller.Switch(68) = 1:PlaySound "sensor":End Sub
Sub sw68_UnHit:la11.IsDropped = 0:Controller.Switch(68) = 0:End Sub

See below my proposal

Sub sw75_Hit:la8.IsDropped = 1:Controller.Switch(75) = 1:PlaySound "sensor":End Sub
Sub sw75_UnHit:la8.IsDropped = 0:Controller.Switch(75) = 0:End Sub

Sub sw66_Hit:la9.IsDropped = 1:Controller.Switch(66) = 1:PlaySound "sensor":End Sub
Sub sw66_UnHit:la9.IsDropped = 0:Controller.Switch(66) = 0:End Sub

Sub sw67_Hit:la10.IsDropped = 1:Controller.Switch(67) = 1:PlaySound "sensor":End Sub
Sub sw67_UnHit:la10.IsDropped = 0:Controller.Switch(67) = 0:End Sub

Sub sw68_Hit:la11.IsDropped = 1:Controller.Switch(68) = 1:PlaySound "sensor":End Sub
Sub sw68_UnHit:la11.IsDropped = 0:Controller.Switch(68) = 0:End Sub

Thank you again.

[Flying Dutchman]

Great Table JPSalas!

I've noticed one small little detail compared to the real one if I may say so ..

Above 'Joe's Diner', next to 'Bowl o Rama' there's a white lamp .. the real Flintstones Table it got 'Drive Thru' written on it .. See pics attached.
1st pic .. your VP Table
2nd pic .. real FS Table

Brilliant gameplay!

Thanks again!

Cheers,
FD.

Attached Files

•  Flintstones_JP.png   49.69KB   105 downloads
•  Flintstones___Real.png   2.73MB   80 downloads

Edited by Flying Dutchman, 24 February 2011 - 09:32 PM.

[Noah Fentz]

Hi JP,

Great table!

I, too, managed to get balls stuck. Here's an image of where from a single multiball I had earlier.



Thanks!

[deadsoulz]

I have played 2 games of this release (Looks awesome by the way, though ball movement seems jumpier then before) But both games I have gotten the ball stuck and a bump will not let it loose. I have to quit the game. (was in two separate spots as well)

Thanks again!

--DS

[jpsalas]

Thanks for all the error reports and fixes I guess I'll fix them in the weekend

JP

[jpsalas]

Updated the table to 1.01, just to fix a few small things

- fixed some lane animations (thanks Axioma)
- now it is possible to nudge the ball out of the middle lower ramp if it gets stuck there.
- tried to fix a slow ball getting stuck on the left ramp. But I'm not sure if it is better now.
- added missing light decal (thanks Flying Dutchman)

I couldn't wait until the weekend

[thewool]

Just came on here to rate the table and there's an update already - thanks JP, you are most definitely the man...

Actually, while you're there... remember back to your Scared Stiff FS table? Do you know if there is a way to display the 'up key' spider backdrop on a second monitor? You seem to indicate there is in your initial post. If not is is easy to rotate the backdrop (spider and decals) for a FS display.

Cheers

[jpsalas]

I don't know if it is possible right now. I know that by using the UVP you can display the lights, but not the spider since it is done with reels. I guess you'll need to wait for a newer VP version which will be able to display the second screen by itself, but as I understand it is not ready yet.

Maybe someone else can though some light into the subject. (since I have just one screen I feel a little "out" with this 2 screen systems)

JP

[thewool]

Thanks JP. As it's a while away I might try rotating the reels for the backglass and just displaying them on my vertical playfied - I think each animation of each reels has to be manually rotated in a gfx editor, as well as the placement on the backglass, mmmm......

I thought I read somewhere that you were building a cab, how's it going? I only built mine recently, converted an old Funhouse cab - playing your FS Funhouse table on there is sublime...

Kris

[jpsalas]

I'm not building a cabinet. I like playing pinball sitting in front of my computer, hahaha.

[thewool]

I'm not building a cabinet. I like playing pinball sitting in front of my computer, hahaha.

Good man, I can't fault you

Edited by thewool, 25 February 2011 - 08:35 PM.

[moogster66]

Thank you JP for your hard work, and the great updates of your tables. One question. The ball is smaller on these new tables, but the Flintstones table is the same size as the old one. Is there a reason for that? It looks even smaller than what the normal ball would be to scale. Is there a way to make the ball a little bigger? Thanks again for the great updates! Mike.