68 replies to this topic

[flipponzio]

This table is not working good for me. The first time I started and played it, I could hear all sound and effects but after some seconds the flippers started to don't work good and got stuck time to time. Now every time I play the table I can't hear all the sound and effects, for example I don't hear the "beats".

I never made any change or saved any change to the table. I also tried and delete the registry entries for the rom. But nothing changes. Also tried version 1.3.0 of the table. Still same issues.

Any idea?

[Thalamus]

I admit. That sounds really weird. Especially since you say that it was working and now it doesn't. Maybe try a full clean.

 

https://vpinball.com...ble-to-default/

[justindavis010101]

I got it to work but had to restart a bunch of times to do so. Maybe try that Boslaw

Edited by justindavis010101, 03 August 2020 - 07:54 PM.

[Copingsaw]

I can get this table to load but I cannot insert a coin or start a game. The plunger works and I can get some responses from the ROM by pushing 7, 8, 9 and 10 keys and can even get the ROM to load a ball onto the playfield for what seems to be some sort of test mode but no matter what I do I cannot get the game to load a coin and start a normal game. Is there some trick to the ROM to get it to initialize normal play?

[kds70]

Mmmmh. Works fine here ... you´ve tried to delete your old nvram file?

[xenonph]

No problems for me either.

This is not a table that needs a pre-initialized nvram to accept coins.

 

You can try this nvram added as attachment.

Should have a couple credits already on it.

 grgar_l1 nvram.zip   180bytes   15 downloads

Extract content of zip file to your nvram folder located where VPinMAME is installed.

Hope this helps you get it working.

[wiesshund]

No problems for me either.

This is not a table that needs a pre-initialized nvram to accept coins.

 

You can try this nvram added as attachment.

Should have a couple credits already on it.

grgar_l1 nvram.zip

Extract content of zip file to your nvram folder located where VPinMAME is installed.

Hope this helps you get it working.

 

Does this table need these?

 

bally_6803_gts3_nvram.zip - VPForums.org

[xenonph]

It is not part of that package, so I would say no.

[Copingsaw]

I appreciate all the responses. I started out with deleting the nvram file and that did not help. I then downloaded and installed the nvram file from Xenonph and the table initialized and played so thank you that solved the problem! Really enjoying the table.

 

Note that I had the exact same problem on both my cabinet and desktop. I put the VPX and B2S file in the TABLES folder and the grgar_l1.zip ROM file in the ROMS folder. When starting the table it won't light up and only the plunger works. Using the 7, 8, 9 and 0 keys can get some responses out of the ROM either cycling through sounds or numbers on the backglass/dmd display. Nothing I was able to do would let me insert a coin or start a game until I installed the nvram file from Xenonph.