82 replies to this topic

[batch]

Try "up" and "down" arrows keys

[Umpa]

Try "up" and "down" arrows keys

Hmm nope. Dang it

Sent from my SAMSUNG-SM-G935A using Tapatalk

[batch]

Try the following link: http://www.vpforums....tutorials&cat=9

[hauntfreaks]

 

Try "up" and "down" arrows keys

Hmm nope. Dang it

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

while in the game hit f1 make sure "use sound" is checked

[ta2686]

Try the following link: http://www.vpforums....tutorials&cat=9

Sorry, but this table does not use the rom to control volume.  This table used analog controls contained within the cabinet to adjust the volume.

 

You would have to use the procedure of adjusting channels through the PinMAME window to adjust the volume for this table.  That would mean:

 

- Clicking on the PinMAME window (DMD) with the mouse

- Pressing the tilde key (~) on your keyboard to open a white box - this would be the key to the left of the 1 key on the keyboard

- Using the up and down arrow keys, scroll through channels until you find a channel to adjust

- Using the left and right arrow keys, adjust the channel - left arrow lowers the volume, right arrow raises the volume

- Repeat previous 2 steps to adjust other channels

- When done, press the tilde key to close the white box

- Click anywhere on the table to return focus to the table

 

I also agree with hauntfreaks that you should make sure use sound is checked when the F1 form is displayed.

 

Hope this helps.

[Umpa]

Try the following link: http://www.vpforums....tutorials&cat=9

Sorry, but this table does not use the rom to control volume.  This table used analog controls contained within the cabinet to adjust the volume.
 
You would have to use the procedure of adjusting channels through the PinMAME window to adjust the volume for this table.  That would mean:
 
- Clicking on the PinMAME window (DMD) with the mouse
- Pressing the tilde key (~) on your keyboard to open a white box - this would be the key to the left of the 1 key on the keyboard
- Using the up and down arrow keys, scroll through channels until you find a channel to adjust
- Using the left and right arrow keys, adjust the channel - left arrow lowers the volume, right arrow raises the volume
- Repeat previous 2 steps to adjust other channels
- When done, press the tilde key to close the white box
- Click anywhere on the table to return focus to the table
 
I also agree with hauntfreaks that you should make sure use sound is checked when the F1 form is displayed.
 
Hope this helps.

Thank you!

Sent from my SAMSUNG-SM-G935A using Tapatalk

[mystereo]

Is the kickout hole from the right side drains perfectly between the flippers almost every time. I've only been able to save from it once. Is that normal on this table?

[Rajo Joey]

Is the kickout hole from the right side drains perfectly between the flippers almost every time. I've only been able to save from it once. Is that normal on this table?

At first I have the same issue, but if you don't react, the ball goes always on the peak of the left flipperbat and jumps to the right one.

Gesendet von meinem SGP511 mit Tapatalk

[STAT]

Javier, i noticed a small Bug (?) at Bangerang Multiball, one Ball was in a Kicker or Trigger on the right Side, i heard that the Kicker would kick out the Ball continuously,
but it didnt come out prompt, just very late ...

 

What is "TriggerWR" ?

 

Or "Sw48(b)" and "Primitive1" (colidalbe) ?

 

I think it was somewhere at this Elements, where i have seen the Ball Comes out after much much kick out attempt

Edited by STAT, 03 September 2017 - 08:08 AM.

[mattbini]

Thanks for posting this table. Great fun!

[mystereo]

Thanks Joey. You're absolutely right. I let the ball hit the left flipper and it does bounce over to the right every time. Boy, it takes a lot of restraint to stop from hitting that ball with the left flipper.

Thanks for releasing this table! Now 3 of my 5 favorites have been released for VPX. Just waiting patiently for Space Invaders and Sorcerer someday.

 

 

Is the kickout hole from the right side drains perfectly between the flippers almost every time. I've only been able to save from it once. Is that normal on this table?

At first I have the same issue, but if you don't react, the ball goes always on the peak of the left flipperbat and jumps to the right one.

Gesendet von meinem SGP511 mit Tapatalk

 

Edited by mystereo, 03 September 2017 - 05:58 PM.

[Practicedummy]

I played this game in real life. The ball should kick out towards the base of the left flipper and not towards the center.

[javier1515]

Sorry for not answering before, real life has me busy these days

 

 

Javier, i noticed a small Bug (?) at Bangerang Multiball, one Ball was in a Kicker or Trigger on the right Side, i heard that the Kicker would kick out the Ball continuously,
but it didnt come out prompt, just very late ...

 

What is "TriggerWR" ?

 

Or "Sw48(b)" and "Primitive1" (colidalbe) ?

 

I think it was somewhere at this Elements, where i have seen the Ball Comes out after much much kick out attempt

 

 

Fixed in version 1.01

ver. 1.01

fixed: ball stuck in the right hole, now when the ball is ejected it is directed more to the middle of the left fliper for a better control of the ball

 

Also change the rom of "Hook_408" by "Hook_500" google is your best friend to find this latest version.

Edited by javier1515, 05 September 2017 - 10:12 PM.

[WWE]

Thanks Javier​ for Update   

[STAT]

Thanks Javier
 
Reminder to new ROM: Googles First with "hook_500.zip"

Edited by STAT, 06 September 2017 - 02:39 PM.

[sam80]

Thanks for the update Javier

[toxie]

Thanks for using the (unofficial but awesome) Hook 5.00 ROM now (see http://www.pinballcode.com/)..

[Ark Malmeida]

Can't hear table I hear ball rolling sounds but no music. I know these tables had volume control not through the rom menu. Anyone have low volume with this table?

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

Did you figure this one out Umpa?  I also get no music or voices with the Hook_500 rom. (The Hook_408 rom is fine)  I hit F1 and made sure that 'use sound' is checked and I used ~ to get to the pinmame window but didn't see an option there for volume adjustment. 

Edited by Ark Malmeida, 08 September 2017 - 06:12 PM.

[ta2686]

 

Can't hear table I hear ball rolling sounds but no music. I know these tables had volume control not through the rom menu. Anyone have low volume with this table?

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

Did you figure this one out Umpa?  I also get no music or voices with the Hook_500 rom. (The Hook_408 rom is fine)  I hit F1 and made sure that 'use sound' is checked and I used ~ to get to the pinmame window but didn't see an option there for volume adjustment. 

 

See this post for what to do to adjust the volume for this type of table:  http://www.vpforums....e=3#entry387332

[Umpa]

 

Can't hear table I hear ball rolling sounds but no music. I know these tables had volume control not through the rom menu. Anyone have low volume with this table?

Sent from my SAMSUNG-SM-G935A using Tapatalk

 
Did you figure this one out Umpa?  I also get no music or voices with the Hook_500 rom. (The Hook_408 rom is fine)  I hit F1 and made sure that 'use sound' is checked and I used ~ to get to the pinmame window but didn't see an option there for volume adjustment. 
 

See this post for what to do to adjust the volume for this type of table:  http://www.vpforums....e=3#entry387332

Nope not yet. Going to try in a bit I'll let you know how I make out. Thanks!

Sent from my SAMSUNG-SM-G935A using Tapatalk