59 replies to this topic

[gtxjoe]

Someone asked your exact question a couple of weeks ago in another thread. I posted a quick tutorial on how to do it but I cannot remember the thread and I'm at work right now and can't search it out. Try some searching, I'm sure it will turn up. If not ill try and find it after work

 

Here is the post from Arcade4- 

http://www.vpforums....showtopic=24940

[thewool]

Yeeeesss, it's out - NOW I CAN MOUSE AROUND!!!!

 

Really good job on this table, it looks stunning... Two non-critical suggestions for an update if one is planned:

 

- as mitchelwb already mentioned, the ramp exists should not stop the ball, only slow it down. I picked this up during physics testing but could not adjust the ramp exits to give the right effect

 

- some 'target' sound effects would be ace

 

Cheers again!! 

Edited by thewool, 16 July 2013 - 10:33 AM.

[zeenon]

Anyone notice a square in the upper right over the direct b2s back glass that says mousin arround? It's almost like the HP wheel image is in the corner. Was on the 7/12 and 7/15 versions.

 

Z

[kiwi]

Anyone notice a square in the upper right over the direct b2s back glass that says mousin arround? It's almost like the HP wheel image is in the corner. Was on the 7/12 and 7/15 versions.

 

Z

I'm not sure it's the same thing, I speak for the desktop table.
When I changed the inclination,Fov, X scale, etc.
in the upper left, I see a blue rectangle.
At the moment I have not yet figured out what it is.

 

Max

[ICPjuggla]

Anyone notice a square in the upper right over the direct b2s back glass that says mousin arround? It's almost like the HP wheel image is in the corner. Was on the 7/12 and 7/15 versions.

 

Z

I'm not sure it's the same thing, I speak for the desktop table.
When I changed the inclination,Fov, X scale, etc.
in the upper left, I see a blue rectangle.
At the moment I have not yet figured out what it is.

 

Max

 

We had the same issue Kiwi and had to adjust the settings to get it to disappear. it seemed to be related to the reels added for the jackpot cheese. Once one reel was added the blue square appeared.

 

Although, this is the 1st I've heard of it being on a FS table. hmmmmmmm, we will have to look at that.

 

zeenon, did you change any settings? or dose the blue box just appear on the backglass without changing anything?

[zeenon]

I'm using the stock settings with the directb2s downloaded from this site.

 

I actually have a graphic in the upper right, which if you look at the pic for the directb2s back ground it's not there.

 

Z

 

 

[Newer]

Hallo Zenon, where i can get the Flashers where you have in your Pincab in the Right and left Corner??

Nice maschine, greetings from Germany.....

[zeenon]

Hallo Zenon, where i can get the Flashers where you have in your Pincab in the Right and left Corner??

Nice maschine, greetings from Germany.....

 

Search ebay for "2 x 22 LED white car Flash Strobe Emergency Light 12V" or I have a link in my build thread - Tiki Gods Pinball 46"/32"/DMD Widebody Build on the hyperpin site. LINK

 

Z

[NEW]

Sometimes makes a strange effect on the graphs of the ball when it collides with an object.

 

Thank you very much for this creation, I really like

 

César

[zeenon]

Sometimes makes a strange effect on the graphs of the ball when it collides with an object.

 

Thank you very much for this creation, I really like

 

César

 

See posts 20, 21 ,22 in this thread. I also was getting that until I switched to a beta version. (I was running 9.15 and experiencing the same thing as you and #20)

 

Z

[Herweh]

I'm using the stock settings with the directb2s downloaded from this site.

 

I actually have a graphic in the upper right, which if you look at the pic for the directb2s back ground it's not there.

 

Z

 

Looks like this is the image of the "B2S DMD" of the backglass. It's an image which should appear on your third screen. To hide it get into the backglass settings (move mouse cursor over the backglass and rightclick the backglass or press "s") and set "B2S DMD" to Hidden. Important, "B2S DMD" and not "DMD".

[starman]

Hey Stefan, you and your team have served a great product. Congratulations! Good to see your mentioned graphic issue solved.

Looks and plays great! Thanks for your effort!

 

Servus

Walter

Edited by starman, 16 July 2013 - 09:45 PM.

[zeenon]

Herweh, Thanks for the info, learn something new everyday. Out of the 100 or so tables that is the first one I've seen with hidden, hidden, hidden. I usually do hidden, hidden, visible. (No idea why, just the way I've been setting up the directb2s back glasses) Z

[kiwi]

I'm not sure it's the same thing, I speak for the desktop table.
When I changed the inclination,Fov, X scale, etc.
in the upper left, I see a blue rectangle.
At the moment I have not yet figured out what it is.

 

Max

 

We had the same issue Kiwi and had to adjust the settings to get it to disappear. it seemed to be related to the reels added for the jackpot cheese. Once one reel was added the blue square appeared.

After some experiments, I have selected all 7 EMReel and put back, the blue box in the upper left, is gone.

 

Thanks

 

Max

[DJ Wheels]

No scores or text of any sort displaying on the backglass dmd. 

[ringorian]

Should analog nudge work for this ? I tried but nothing is happenig .MM and Bad Cats did it after trying Mousin .. to make sure that the sensor is still working ,

[ICPjuggla]

No scores or text of any sort displaying on the backglass dmd.

Can you give a little more info?

Are you running db2s or just a static backglass?? Is the dmd hidden maybe? Not sure need some more info and screen shots if you can please.

Should analog nudge work for this ? I tried but nothing is happenig .MM and Bad Cats did it after trying Mousin .. to make sure that the sensor is still working ,

Sorry I don't have an analog nudge so I'm not totally sure...

[DJ Wheels]

I am using UVP. -What I mean is, on this table and other tables like Game Show and Dr Dude there is a "slim" preset dmd along the bottom of the backglass where the scores, credits and such normally appear. Is there something I need to add to the script to activate it?  The other dmd which you can resize manually, is not showing either. I tried setting "show dmd only " to both true and false and either way nothing appears.

 

No scores or text of any sort displaying on the backglass dmd.

Can you give a little more info?

Are you running db2s or just a static backglass?? Is the dmd hidden maybe? Not sure need some more info and screen shots if you can please.

 

 

[DJ Wheels]

facepalm. I changed to hidden = 0 and now it works!

 

I am using UVP. -What I mean is, on this table and other tables like Game Show and Dr Dude there is a "slim" preset dmd along the bottom of the backglass where the scores, credits and such normally appear. Is there something I need to add to the script to activate it?  The other dmd which you can resize manually, is not showing either. I tried setting "show dmd only " to both true and false and either way nothing appears.

 

No scores or text of any sort displaying on the backglass dmd.

Can you give a little more info?

Are you running db2s or just a static backglass?? Is the dmd hidden maybe? Not sure need some more info and screen shots if you can please.

 

 

 

[oldskoolgamer]

no worries I was just about to suggest that lol glad you got it fixed up