on a real pin cab the bottom was parallel to the ground. it was the play field itself that sat on an incline. So i would hazard a guess to do it the same way with the bottom monitor at a slight angle if only to see a
FS pf! Personally I don't like that flat look having tried it rotating mine already. i still prefer the 3-d look of the 4:3's! but I think if ya' tilt it a bit, it would make the angle a tad easier to see if going with the flat screen tables. just my opinion though...and no offense but and i know leafs are old-school, but microswitch electronic buttons are better for the button contacts if only cause they last forever. with minimum adjusting (a screw as opposed to filing with an emery board a leaf contact and cleaning them constantly with paper! again just my opinion...and don't forget fans for cooling under there too especially the bottom box!
It must be tough to see in the pics but there is actually a 4 1/2" incline on the playfield, combine that with the 2" drop on the front legs and the overall incline on the playfield is around 1:7.5 . I prefer the screen to be recessed in the box to give it more of the illusion of depth plus the ability to mount the dmd under the glass and a couple of flashers.....each to there own I guess.
The cabinet is on a bit of an incline (the p2k's had the front dropped by one set of mounting holes compared to the rear location) but right now the effect is amplified as I have the rear legs sitting on some 3 castered dollies and the front ones on the ground (about an extra 1 1/2"- 2" in height at the rear). This just helps me move it out from the wall while I work on it.
The leaf switches are the add on ones from Lizard Lick Amusements, no points to deal with and at 12v and ground at that, theres no arcing like a real machine's leafs.
https://lizardlick.3...tons_p_168.htmlSome more progress on the wiring....

Thanks for the interest!!!! It's nice to get some feedback.
Edited by zebulon, 24 March 2011 - 12:57 AM.