You might try using RegDLLview-x64.
Also, be sure there is only one copy of the B2S files on your C-Drive (or whatever your main VPX drive is).
From my notes. Please just use these (and extract what you need) so I don't have to edit a special post just for you.
---------
While VPX might-be x86/32bit only ... my OS is Windows-11 Pro 64-bit (so use RegDLLview-x64).
Nirsoft's RegDLLview can help to make sure the proper B2SBackglassServer.DLL is Registered, and that there is only one.
Run "As Admin" if you plan to make any actual changes.
Go down to the V's. The existing one looked fine (there was only one entry shown for it, with 28 System-Entries).
Since I want the new one at C:\
B2S-Server\ , I created that folder and placed a copy of the existing \
B2S\ files inside it.
After DL-ing (and Un-Blocking) B2SServer-2.1.4-6fe802a-win.zip, I unzipped it and also copied those files into new C:\
B2S-Server\ folder as well
(over-writing any duplicates).
I finally deleted my old \
B2S\ folder (happened to be inside my \Visual Pinball\ folder).
Again in RegDLLview-x64, I selected B2SBackglassServer.DLL . Even running "As Admin" it would not let me right-click and "UnRegister Selected Files", so I used the other option to "Deleted All Entries for Selected Files", which (according to my notes) is what I did last time. This also un-Registers it. Exited, ran again, and verified they were really gone.
Back in the new \
B2S-Server\ folder, I Register this new version with the B2SBackglassServerRegisterApp.EXE (as Admin, even on Windows-11).
It should first report that it is NOT Registered, and asks for permission to do so.
If successful, it should report it's now Registered and that "everything is fine".
I clicked NO on second-phase to NOT have Windows Context-Menu support for
B2S (I usually do any desired file-stuff manually anyway).
Rebooted. Double-checked it was there properly with RegDLLview-x64 again (remember, it's toward the top now). Says it is v2.1.4 and has 31 System Entries now (so, a few more). Also, double-check it's NOT still Registered down-below in the V's any more. All looks good.
Terminator-2 (ROM-
DMD) and F14-Tomcat (
B2S-
DMD) both look correct when run directly from VPX-editor (so took some
B2S screenshots). I saved the
B2S-Server options to it's built-in B2STableSettings.xml config-file.
They both use the Default ScreenRes.txt (so I know that is working also). Flash-Gordon's Backglass is still around 4:3, so I know .res files are working.
The
B2S-Server options look correct. The start-mode and default-mode are both "as EXE".
The DOF options at the bottom look correct. Plugins are Activated and Errors are disabled without BackGlass. Plugin-Settings shows the DOF entry as Active. In the DOF-Test Table, the Knocker works.
Edited by Tesla, 21 September 2026 - 09:11 PM.