3 replies to this topic

[sandmannd]

I'm new to the Virtual Pinball world. Got everything setup and most is working great. The issue I have, and can't seem to figure out, is when I use the left flipper on the cabinet, it causes the table to nudge. I've turned the gane down from 150 to 100 but it either doesn't hold or doesn't work. Any help on this would be great. 

 

Viual Pinball v10.8.0

[Emanoel299]

Hi

 

Take a look in GUI preferences your key settings

and then look to your configuration.

[sandmannd]

Hi

 

Take a look in GUI preferences your key settings

and then look to your configuration.

 

 

I have them all set right, just for some reason when I use the left flipper it nudges. 

[Emanoel299]

OK

 

I don´t know how is your Power Supply system is.

Once I had a similar problem.

I was using a no good 12V power supply for my LED input buttons. There was line ripple

and sometimes the nudge start alone or when I pressed flipper button.

I change the 12V to a good PS with no line riplle and fixed.

It could be your case.