No replies to this topic

[1000]

Hello everyone just moments away from the official release of Oktoberfest "Pinball On Tap"

I have done many hours of work on this table to make sure you can go up both Barrell Multi ball and The Famous Corkscrew Roller Coaster ramps with both right flippers. Sometimes the ball may be knocked off the playfield its o.k Ive installed some kickers to get the ball back into play.

 

The Oktoberfest table has a smaller playfield than most tables as you can see the top part of the table isn't being used maybe in the future we could put some bumpers or something for a bonus area,just food for thought.

 

So moving on to the board I watched people play this table and figured out there needed to be magnets put just past the right spinner to catch the ball I put classes with this one so every so often the ball will stop or keep going around the table,and also one on each side of the table by the in-lanes I activated these to let people get to know the table "easy mode" later version will be more like the real game.

There is also a magnet at the top of the table to stop the ball and drop it into the Bumper Car area every so often the magnet will catch the ball or keep going around the table.

 

I added pop ups to stop the ball also

Added diverter gates to go behind Ottos Barrell and keep the game playing.

I added a ramp that raises and lowers to go up to the Famous Corkscrew Roller Coaster

actually I could import the model of a ramp that raises and lowers but I couldnt access it,So I made a wall that drops and raises. "If anyone would like to replace the wall with a ramp feel free to do so and thank you for helping make this table more like the real thing."

 

I put some triggers on the right side of the yellow ramp to raise and lower the ramp going up to the Roller Coaster, I put a box up there covering the wires I couldnt seem to attach them. If someone knows how to do that go ahead I might keep the box there or move it,it's not on the real table but it's pretty cool to zoom in and see the balls in there when I had the diverters on."

I removed the diverters that held the balls for Corkscrew Multi Ball and Barrell Multi Ball I couldn't get the drain to work properly.

Then this happened I was messing with the variable "i" and it made the subscript out of range when I put it back the table reverted somehow and made the balls and credits act strangely It was working perfect.

Maybe some one could figure that out.

I used to know a friend a coder named "Someone" he was pretty cool. Hey if your still out there.

I Welcome All Coders That would like to help make this table closer to the real thing.

I need help with the Models I could only get half way with the blender so maybe there is someone that would like to make Otto and maybe a better Barrell.  "I appreciate it Thanks."

Also I kept all the original music from the first VPX Oktoberfest

If anyone has the other music feel free to apply them and thank you.

Also looking for someone to do the DMD Please."with the beer mugs" Big thanks there.

I noticed there were ducks on this table so if you hit 20 ducks you get an extra ball.

Also If you put the ball into the left or right "Buildings" Kickers 7 times you get an Extra-Ball.

I think I've covered everything enjoy playing and modding.

Have a Super Great Day.

Cheers.

 

 

Edited by 1000, 27 January 2024 - 02:40 PM.