1 reply to this topic

[Gruntis]

Got my table up and running but got this last issues I'm at a lost to resolve.

 

I have a pinscape controller and no toys

Just wanting b2s backglasses on fx3 tables

 

When I load up popper I have the backglass showing. When I load the table it switches to a popper recording and then the b2s backglass starts. 

It generally only remains there for a few seconds then goes to a black screen.

 

looking at the log it appears it doesn't progess past finding fx3. 

 

08-Mar-23 14:05:59.452 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

08-Mar-23 14:05:59.455 - Starting up - version 7.44

08-Mar-23 14:05:59.457 - For support come and visit the community here http://www.vpforums....p?showforum=104

08-Mar-23 14:05:59.459 - Pre-Reading DOFLinx.INI startup config file details

08-Mar-23 14:05:59.612 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

08-Mar-23 14:05:59.621 - DOFLinx device:1 Pinscape setup with 22 outputs

08-Mar-23 14:05:59.635 - DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0

08-Mar-23 14:05:59.638 - DOFLinx device:2 LEDWiz setup with 32 outputs

08-Mar-23 14:05:59.639 - This device is probably a PinScape emulating a LEDWiz, if it is, then it is better to assign toys to the Pinscape device not this one

08-Mar-23 14:05:59.644 - Reading DOFLinx.INI startup config file details

08-Mar-23 14:05:59.659 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig-colours_only.ini

08-Mar-23 14:06:28.291 - FX3.EXE file exists, getting details

 

Not real savvy with this, any help appeciated

[Gruntis]

Tried a few more things and now log reads differently but outcome is the same

 

10-Mar-23 19:17:08.195 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

10-Mar-23 19:17:08.201 - DOFLinx device:1 Pinscape setup with 22 outputs

10-Mar-23 19:17:08.207 - DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0

10-Mar-23 19:17:08.213 - DOFLinx device:2 LEDWiz setup with 32 outputs

10-Mar-23 19:17:08.218 - This device is probably a PinScape emulating a LEDWiz, if it is, then it is better to assign toys to the Pinscape device not this one

10-Mar-23 19:22:50.278 - Found valid process name of 'Pinball FX3'

10-Mar-23 19:22:50.284 - Setting FX3 process ID to :15960

10-Mar-23 19:22:50.307 - Activated by process name : 'Pinball FX3'

10-Mar-23 19:22:50.313 - Named process detected and startup commenced

10-Mar-23 19:22:50.833 - FX3.EXE file exists, getting details

10-Mar-23 19:22:50.840 - FX3 EXE name=C:\Program Files (x86)\Steam\steamapps\common\Pinball FX3\Pinball FX3.exe Size=11564824 bytes, Dated 4/06/2022 1:20:02 PM

10-Mar-23 19:22:50.845 - Applying memory offsets for FX3 version circa 11/03/22

10-Mar-23 19:22:50.852 - FX3 full link active

10-Mar-23 19:22:51.871 - B2S Backglass loaded - FX3Logo

10-Mar-23 19:22:58.882 - Loading FX3 configuration file C:\DirectOutput\FX3_PUPlayer\ALL_PRE.FX3

10-Mar-23 19:22:58.888 - Processing parameter 'BUTTON_LIGHT_ACTION' with data 'BUT_LF,LEFTFLIPPER,ON,2,0,BLACK,BUT_LF,LEFTFLIPPER,OFF,1,0,BLACK,BUT_RF,RIGHTFLIPPER,ON,2,0,BLACK,BUT_RF,RIGHTFLIPPER,OFF,1,0,BLACK,BUT_ML,NUDGELEFT,ON,7,1000,RED,BUT_ML,NUDGEFORWARD,ON,7,1000,RED,BUT_MR,NUDGERIGHT,ON,7,1000,RED,BUT_MR,NUDGEFORWARD,ON,7,1000,RED' in real-time

10-Mar-23 19:22:58.894 - Processing parameter 'FF_PUP_INIT' with data 'FX3_PUP_SSF' in real-time

10-Mar-23 19:22:58.952 - Loading FX3 configuration file C:\DirectOutput\FX3_PUPlayer\AlienIsolationPinball.FX3

10-Mar-23 19:22:58.958 - Processing parameter 'FF_ROM' with data 'FX2_ALIENISOL' in real-time

10-Mar-23 19:22:58.964 - Loading DOF 'Pinball' with ROM='FX2_ALIENISOL'

10-Mar-23 19:22:59.001 - Processing parameter 'BACKGLASS_EXISTS' with data 'YES' in real-time

10-Mar-23 19:22:59.007 - Processing parameter 'COLOUR_PALETTE' with data 'MEDIUM_BLUE,LIME,DODGER_BLUE,LIME_GREEN' in real-time

10-Mar-23 19:22:59.013 - Processing parameter 'BUTTON_COLOUR_CHANGE' with data 'BUT_LF,LIME_GREEN,BUT_RF,LIME_GREEN,BUT_ML,DODGER_BLUE,BUT_MR,DODGER_BLUE' in real-time

10-Mar-23 19:22:59.019 - Processing parameter 'FF_PUP_INIT' with data 'ALIEN_ISOLATION' in real-time

10-Mar-23 19:22:59.032 - Loading FX3 configuration file C:\DirectOutput\FX3_PUPlayer\ALL_POST.FX3

10-Mar-23 19:22:59.054 - B2S Backglass loaded - AlienIsolationPinball

10-Mar-23 19:22:59.065 - Cabinet Mode = 0   Backglass Mode = 0

10-Mar-23 19:23:01.376 - GAMEMODE mode=1 action #0 of 'FF_COLOUR,BLACK,RGB_DF,0'

10-Mar-23 19:23:01.383 - GAMEMODE mode=1 action #1 of 'FF_FLASHER,DV_FLOL,FL_FL,6,750,100,ORANGE'

10-Mar-23 19:23:01.389 - GAMEMODE mode=1 action #2 of 'FF_FLASHER,DV_FLOR,FL_FL,6,750,100,ORANGE'

10-Mar-23 19:23:01.397 - GAMEMODE mode=1 action #3 of 'FF_FLASHER,DV_FLIL,FL_FL,6,750,100,YELLOW'

10-Mar-23 19:23:01.402 - GAMEMODE mode=1 action #4 of 'FF_FLASHER,DV_FLIR,FL_FL,6,750,100,YELLOW'

10-Mar-23 19:23:01.408 - GAMEMODE mode=1 action #5 of 'FF_FLASHER,DV_FLCN,FL_FL,6,750,100,ORANGE'

10-Mar-23 19:23:01.414 - GAMEMODE mode=1 action #6 of 'FF_DOF,E424,-1'

10-Mar-23 19:23:02.373 - There are no OFF actions for GAMEMODE

10-Mar-23 19:23:03.847 - Activating process disappeared so stopping things

10-Mar-23 19:23:03.858 - Stopping ROM