Jump to content



Photo
- - - - -

Best place to purchase cabinet and decals ?

cabinet decals

  • Please log in to reply
7 replies to this topic

#1 Mammouth

Mammouth

    Neophyte

  • Members
  • Pip
  • 1 posts

  • Flag: Canada

  • Favorite Pinball: Taxi

Posted 18 August 2021 - 02:50 PM

Hello,

 

i found virtual pinball a month ago after seeing a 1up pinball in bestbuy and i think i will have fun to build my own.

I have a couple of question before i start ordering stuff.

 

1: Is virtuapin the best place to purchase cabinet online ?

 

2: My Woodworking skill is probably 2 out of 10 but i'm 10 out of 10 at ikea.

It is a impossible mission to build a cab from their flat pack ? Flat pack would save me on shipping as i'm living in Montreal (Canada)

 

3: Should i go Standard, Wide or Ultra-wide ? I want something that will look like the real thing with enough space to add 2 played joystick and button ?

 

4: If i want to add 2 player joystick + button on top to play mame game on the backbox screen, is it something possible with virtuapin flatpack ?

 

Thanks for your time


Edited by Mammouth, 18 August 2021 - 07:20 PM.


#2 mjr

mjr

    Pinball Wizard

  • Members
  • PipPipPipPipPip
  • 3,346 posts

  • Flag: United States of America

  • Favorite Pinball: Medieval Madness

Posted 18 August 2021 - 06:14 PM

VirtuaPin would be a good choice for sourcing a cabinet.  Their product is a faithful reproduction of the real machines made from the 1990s to present, and as far as I've seen, no one else offers anything even close to the real thing.  If you're good with Ikea type assembly, I think you'll be completely fine with their flat pack.  I'd say it's slightly more involved than a typical Ikea assembly, but only slightly, and doesn't require any real woodworking skills.

 

Keep in mind that you'll still have to take on some woodworking/engineering jobs as you build out the rest of the project, since the flat pack is just the cabinet exterior.  You'll still have to come up with things like the TV mounting system and computer installation and so forth.  But that stuff is mostly interior, out of view, with little or no cosmetic impact.  I think most people who say "I'm not good at woodworking" are mostly worried that they won't be able to make it look nice, as opposed to not knowing how to drill a hole or pound in a nail.

 

Adding joysticks and other controls would be something you'd have to engineer on your own, no matter what you choose as the cabinet base.  The VirtuaPin kits aren't set up for that, but they won't prevent it, either.  The main thing is that you'll probably have to forego the standard "lockbar" trim and build your own front trim instead, to serve as a platform for the controls.  You probably will need to do some custom woodworking for that.  A few people here have built hybrids like that before, and posted lots of pictures of them here in past "build threads".  You should be able to find lots of examples for inspiration, if you can muster some patience to dig through the old topics.  Personally, I'd want to keep the pin cab "pure", so my ideal would be to build a separate stand-alone MAME cab for the video games, but I realize that space and budget constraints might make a hybrid approach the only option.



#3 garnel

garnel

    Enthusiast

  • Gold Supporter
  • 269 posts
  • Location:Oregon

  • Flag: United States of America

  • Favorite Pinball: Medieval Madness

Posted 18 August 2021 - 06:34 PM

I built a 40" standard body from Xtension which is cam lock - similar to Ikea builds. It's easy to build (relatively) - but is limited to a 40" playfield.

 

Decided to build a 2nd cabinet using a 43" gaming monitor for the playfield, so looked into Virtuapin and GameRoomSolutions 43" widebody cabinet kits. After eliminating the GameRoomSolutions kit due to the many negative online reviews for both product quality and support, I purchased the Virtuapin wide body flat pack. I would have ordered a pre built cab from them, but the lead time was too long.

 

I'm experienced at building things from plans - storage shed, a teardrop trailer, model airplanes, etc, so the Virtuapin flat pack, which needs to be glued, screwed, and painted was doable for me. YouTube research was needed to decide how to mount the playfield.

 

Virtuapin support was excellent - they encourage you to call for support - and pick up the phone when you call.

 

The Xtension cam lock cabinet only took one day to build. Display mounts are included - but you are limited to a 40" playfield. It's a solid product. It comes with plexiglass for the backglass and playfield.

 

The Virtuapin WPC flat pack took over a week for gluing, screwing, painting, sanding between coats, and figuring out how to mount the playfield display, etc. It's a very solid product using laser cut 3/4" Maple plywood. It does not come with glass or plexiglass, you'll need to get that locally, or from a vendor like Pinscape. For me, this was the better choice.

 

Hope this helps with your decision.

 

Sept '21 update:

I've completed the Virtuapin cab build with all of the toys. If you plan to install toys, I found that installing them and the associated wiring is a pain with the Xtension cab because you have to install them from underneath, laying on your back with arms up. The Virtuapin cab lets you mount the playfield display so you have unlimited access the inside of the cab from the top - making it much easier to install and wire everything.


Edited by garnel, 19 September 2021 - 06:12 PM.


#4 gtxjoe

gtxjoe

    VPF Veteran

  • VIP
  • 5,159 posts

  • Flag: United States of America

  • Favorite Pinball: Medieval Madness, AbraCadabra



Contributor

Posted 18 August 2021 - 06:35 PM

Most real pinball machines are Standard size.  There are also widebody pinball machines made 

 

Standard can hold TVs up to 40".  There is really only one 40" 4K TV still being produced, Vizio, so there is risk that in the future no 4K monitors will be available

Widebody is used with the 43" TVs which there are many TV and gaming monitors available.  Widebody can hold up to 46 or 47" probably, but there are no 46 or 47" 4K TVs

Ultrawidebody I guess for 49" TVs 

 

With adding joystick, shouldnt be an issue.  You could still have the lockbar trim if you plan for it.  I think the main thing here is that you will need custom playfield glass since the control panel will make the glass length shorter

 

Regarding Stuzza artwork.  I just looked at Stuzza's first post here and the onedrive link takes me to 79 download artwork packages.  https://www.vpforums...showtopic=26497



#5 wiesshund

wiesshund

    VPF Legend

  • Members
  • PipPipPipPipPipPipPip
  • 11,871 posts

  • Flag: United States of America

  • Favorite Pinball: How many can i have?

Posted 18 August 2021 - 06:42 PM

If you call Noah and talk to him, i think Virtuapin can facilitate almost anything if they know what you want ahead of time.
May take a little longer to fab up the pieces to ship to you with custom stuff, but i dont think it would be any problem for them.
They may even be able to do the arcade control panel so it arrives already cut and drilled etc.


If you feel the need to empty your wallet in my direction, i don't have any way to receive it anyways

Spend it on Hookers and Blow


#6 Conehead

Conehead

    Enthusiast

  • Members
  • PipPipPip
  • 475 posts

  • Flag: Canada

  • Favorite Pinball: Not sure yet!

Posted 19 August 2021 - 01:36 AM

I used Virtuapin for a fully trimmed cab and I've never looked back.  I have details too many to write because I'm lazy, but if you want more details feel free to pm me.  I'm responding because I'm also from Canada (Vancouver) so can let you know how much the exchange and duty really added onto the cost.  Also, I know of another guy in Montreal who's planning to order a cab from Virtuapin so maybe you two can compare notes for moving forward.



#7 hlr53

hlr53

    Pinball Fan

  • Members
  • PipPipPipPip
  • 683 posts
  • Location:Kettering OH

  • Flag: United States of America

  • Favorite Pinball: 1964 Williams Palooka Joe

Posted 20 August 2021 - 09:28 PM

You cannot go wrong with Virtuapin. Highly Recommended. They also print decals. I had Brad Bowman print mine. Bowmansign.com. Perfectly printed and also highly recommended.


Former Cab: 40" Haier, 28" I-INC, i7-6700, 1080 GPU, v3DMD, 4D7 solenoids. Altec-Lansing speakers and sub. Artwork by Stuzza. Printing by Brad Bowman. VR HP reverb


#8 vestaviascott

vestaviascott

    Eighties8

  • Members
  • PipPipPip
  • 150 posts
  • Location:Birmingham, Alabama

  • Flag: United States of America

  • Favorite Pinball: Elektra

Posted 24 August 2021 - 02:53 PM

Virtuapin for the win, especially if you are close enough to afford the shipping. Paul currently offers the best solution for anyone wanting a faithful reproduction of the arcade cabinets you are likely familiar with, both standard and widebody. Definitely would suggest going widebody due to the lack of choice with 4K monitors and TVs for a standard width cabinet. 

 

Paul at virtuapin is a first class guy and extremely knowledgable about this hobby. He also started this forum, fwiw.

 

Paul created a custom widebody Stern style lockbar and receiver kit for me complete with fire button, switch and the metalwork finished in black powdercoat just like the modern Stern machines you see today. It came out excellent and I'm extremely happy with it and with the support I received from Paul on this and many other purchases I've made since I started my build.

 

Heres a pic FWIW (my cabinet came from another vendor closer to my home location):
 

239513898_4386561418073349_2389735435340


Edited by vestaviascott, 24 August 2021 - 09:36 PM.

“Bones heal, pain is temporary, and chicks dig scars” -- Evel Knievel






Also tagged with one or more of these keywords: cabinet, decals