14 replies to this topic

[goldchicco]

File Name: Basketball (IDSA 1986)

File Submitter: goldchicco

File Submitted: 24 Jul 2020

File Category: VPX/VPinMAME Recreations

Author(s): Goldchicco<br />32assassin<br />mfuegermann
Manufacturer: Other - Pinball
Year: 1986
ROM: Link to ROM
Permission to MOD?: Yes, with approval

VPX Conversion by: Goldchicco & 32assassin
 
vp9 table by: mfuegemann
 
Special Thanks to :
 
32assassin for helping me with this conversion and for sharing his passion, knowledge and time.
 
Thank you to:
 
mfuegermann for the VP9 version and for giving the OK to proceed with this project.
 
 
 
This table was realized with you in mind... so please leave constructive feedback or comments in the support topic and will try to make it better.Permission to Mod:  you must ask / get permission first.
 
 
 
All Logos, Copyrights and Trademarks are property of their respective owners.
 
PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!
 

Yoy have 30 seconds to score a basket.....be carefull of the small wall in the middle of the playfiled, is there for tricking you (table was manufactured this way)
Press F6 on the first launch to set the deed switches the way you want.
 

Click here to download this file

[clyde]

Thanks for this very nice table.

[bolt]

Thank you Goldchicco and 32assassin.

[Slydog43]

Thanks, I'm having an issue with my DOF, shaker motor starts and never stops.  Anyone else?

[bha19]

Great table but I think I found 2 problems.

1) Somewhere in the middle of the table near the bottom of the lowest pop bumper where the red ovals are the ball seems to hop slightly, so is this supposed to happen?

2) The inlanes do not drain the ball they just feed the flippers like the outlanes. In the rules supplied they are supposed to drain the ball.

[goldchicco]

@bha19

 

I posted in the description:

 

Yoy have 30 seconds to score a basket.....be careful of the small wall in the middle of the playfiled, is there for tricking you (table was manufactured this way)

Real table playfiled picture here:

https://www.ipdb.org...no=28100&zoom=1

 

Also if you want the ball to drain from the inlanes just delete those 2 walls from layer 1: LeftLane001 and LeftLane002 , done problem solved.

I found very annoying losing the ball every time the ball is coming down, just try.....

Edited by goldchicco, 25 July 2020 - 03:21 AM.

[STAT]

Thanks again goldchicco and 32assassin

But with the Walls, this is more ore less a "Cheat" ? Have to check that, because
i like all the Stuff like the real Things … hard or easy, doesn't matter ...

[HiRez00]

Thanks, I'm having an issue with my DOF, shaker motor starts and never stops.  Anyone else?

@SlyDog43

 

Also having a similar issue with DOF ... When table boots - it immediately turns on a couple of my solenoids that don't release until I completely quit the table. They just stay in the LOCKED-ON position - which is not good.

 

So I have to either disable DOF for this table or never load / play it until the issue is resolved.

 

Can't risk burning out any solenoids or starting a fire inside my cab,

[bha19]

Thanks for the quick reply

[goldchicco]

@HiRez00

Thank you for the feedback, I am going to look it and when solve I will release ver 1.1

[akiles50000]

The plunger texture is missed:

 

[bpjacobsen]

I'm the 3rd person to say this but the rom is not working for me either. I tried downloading it from the link and vpu but it still errors out saying to  check the rom path. I have it in there.    Anyone figure this out yet?

[wiesshund]

I'm the 3rd person to say this but the rom is not working for me either. I tried downloading it from the link and vpu but it still errors out saying to  check the rom path. I have it in there.    Anyone figure this out yet?

i'd make sure you have the rom in the vpinmame\rom folder

and make sure your pinmame install it up to date

i downloaded the table and the same rom linked in the table description, and it seemed to work just fine
Might right click the rom zip and pick properties and make sure windows does not have it flagged as block due to being from another computer 

[bpjacobsen]

 

I'm the 3rd person to say this but the rom is not working for me either. I tried downloading it from the link and vpu but it still errors out saying to  check the rom path. I have it in there.    Anyone figure this out yet?

i'd make sure you have the rom in the vpinmame\rom folder

and make sure your pinmame install it up to date

i downloaded the table and the same rom linked in the table description, and it seemed to work just fine
Might right click the rom zip and pick properties and make sure windows does not have it flagged as block due to being from another computer 

 

see attached. I have the rom in the right path like the other 700+ roms. Not sure why this particular one won't run. I also just applied the latest SAM vpinmame build the other day but this error has nothing to do with vpinmame build as that would be a different error. For whatever reason, it's not recognizing this particular rom. I also made sure it's unblocked. Hmmm.... at a loss on this one

Attached Files

•  rom path.png   14.25KB   0 downloads

Edited by bpjacobsen, 04 November 2020 - 02:56 PM.

[clyde]

Delete your nvram file & try this rom.    bsktball.zip   13.64KB   7 downloads