25 replies to this topic

[kiwi]

File Name: Farfalla Zaccaria 1983

File Submitter: kiwi

File Submitted: 10 Mar 2019

File Category: VPX/VPinMAME Recreations

Author(s): Kiwi
Manufacturer: Zaccaria
Year: 1983
ROM: Link to ROM
Permission to MOD?: Yes, with approval

Farfalla Zaccaria 1983 DT, FS and FSS.
 
 
At the top of the script you find some options, how to make visible or invisible the VPinMAME in the various modes (DT, FS, FSS),
hide or not the rails in FS mode,
and the general lighting mode, I prefer to have the general lighting turned on in play .
 
Special thanks to:
 
JP Salas, my tables are based on his scripts
Akiles50000, to have tested the table and for the physics advice
Arngrim, for DOF
DJRobX, sound playback functions code
Rothbauerw, sound playback functions code
To the VP and VPinMame Development Team
 
 
In the first hundred lines of the scripts you will find options regarding sounds, DMD, backglass, etc ...
 

JP's LUT brightness control, hold down the LeftMagnaSave and pressing the RightMagnaSave change the brightness of the table.

Click here to download this file

[batch]

Thanks, it's a beauty !

[STAT]

Really great kiwi,thank you

 

only 1 small Thing, for any reason, HiddenDMD doesn't work, i changed .hidden = 1 manually for FS.

 IMG_20190310_103441.jpg   203.08KB   8 downloads

Edited by STAT, 10 March 2019 - 09:54 AM.

[kiwi]

Really great kiwi,thank you

 

only 1 small Thing, for any reason, HiddenDMD doesn't work, i changed .hidden = 1 manually for FS.

IMG_20190310_103441.jpg

Did you change line 54?

[STAT]

No ...

[Thalamus]

Kiwi. This is a very good re-creation ! It both looks and plays absolutely perfect. Good job and thank you so much !!

[Mark70]

Great, thanks a lot!

[humanoide]

excellent work.    

thanks. 

[Joppnl]

That's a beautiful sweety!

Thank you for this (re-)creation  

[SixOfTwelve]

Kinda late to the party here, but I'm having great troubles with the ROM settings for the coin and the number of balls.

Going with a blank ROM with no NVRAM settings, the game gives me 3 balls and inserts 6 credits when I press "5".

 

I read the tutorial (https://www.vpforums...ials&article=91): I press F6, I activate DIP switch 4, I hear the annoying noise.

I can access all the settings, move to setting 20 and change the number of balls to 5.

But when I press F6 again and deactivate DIP switch 4, nothing happens to the display, the game doesn't show that it's restarting or anything.

So I press F3 to reload the table, and when I start a new game, it only gives me 3 balls again.

I go into the settings again, and it's still set to 5 balls in there.

I deleted the NVRAM file, tried reconfiguring, re-downloaded the ROM... no change.

What am I doing wrong?

[kiwi]

Also I have never been able to change the settings of the ROM,

but if I remember correctly the manual says to set other parameters again, even if not really necessary.

 

If I find time, I'll try again later.

[kiwi]

Press the F6 key and turn on the sw4, and then press Ok,

press key 7 to navigate through the various tests,

with key 1 (credit) you can modify the parameters of the settings.

 

It is necessary to reset the test accounting parameters 6,7,8 and 9,

hold down the credit key (1) for a couple of seconds, until the displays indicate 0,

to be done even if the display already shows 0.

 

Then make the desired changes such as changing the number of balls per game, etc.

 

When done, go back to test 0, where you hear the annoying sound, and turn off the sw4 switch.

Edited by kiwi, 10 April 2022 - 10:58 AM.

[SixOfTwelve]

Thank you very much!

[wolfbiscuits]

The multi special doesn't seem to be giving me the 1,000,000 points. Is this an option or a setting somewhere that I'm missing?

[kiwi]

Press the F6 key and turn on the sw4, and then press Ok,

press key 7 to navigate through the various tests,

with key 1 (credit) you can modify the parameters of the settings.

 

It is necessary to reset the test accounting parameters 6,7,8 and 9,

hold down the credit key (1) for a couple of seconds, until the displays indicate 0,

to be done even if the display already shows 0.

 

Then make the desired changes such as changing the number of balls per game, etc.

 

When done, go back to test 0, where you hear the annoying sound, and turn off the sw4 switch.

It depends on what is set in test 27.

You have to follow the instructions of the tutorial  https://www.vpforums...ials&article=91 and what I said above to change the setting of the test 27.

 

00 = no win

01 = 1 bonus ball

02 = 1 replay

03 =  1 superbonus

04 = 1.000.000 points
 

[STAT]

Thanks for the Update, one of my fav. Zaccaria Table

[bolt]

Cool table, thank you for the update.

[KurtWehrli]

Press the F6 key and turn on the sw4, and then press Ok,

press key 7 to navigate through the various tests,

with key 1 (credit) you can modify the parameters of the settings.

 

It is necessary to reset the test accounting parameters 6,7,8 and 9,

hold down the credit key (1) for a couple of seconds, until the displays indicate 0,

to be done even if the display already shows 0.

 

Then make the desired changes such as changing the number of balls per game, etc.

 

When done, go back to test 0, where you hear the annoying sound, and turn off the sw4 switch.

Very same issue, no advice from above helps.

Any other hint highly welcome.

[kiwi]

 

Press the F6 key and turn on the sw4, and then press Ok,

press key 7 to navigate through the various tests,

with key 1 (credit) you can modify the parameters of the settings.

 

It is necessary to reset the test accounting parameters 6,7,8 and 9,

hold down the credit key (1) for a couple of seconds, until the displays indicate 0,

to be done even if the display already shows 0.

 

Then make the desired changes such as changing the number of balls per game, etc.

 

When done, go back to test 0, where you hear the annoying sound, and turn off the sw4 switch.

Very same issue, no advice from above helps.

Any other hint highly welcome.

 

Are you sure you didn't skip this step?

 

It is necessary to reset the test accounting parameters 6,7,8 and 9,

hold down the credit key (1) for a couple of seconds, until the displays indicate 0,

to be done even if the display already shows 0.

 

 

What do you want to change?

[kiwi]

@vladaymir

 

I noticed the left vertical flip didn't go back to its original position. Does it have to do with the VPX version I'm using?

If you give us some more information, regular or VPX beta, 32 or 64 bit, VPinMame version.