2 replies to this topic

[Jannek42]

Hello everybody,

 

two days ago I´ve installed DOF on my Computer - I´m using it with a PinControl1 and just one RGB-Strip is my Output.

Most of my tables are working fine, but there´s strange behaviour on some other tables.

 

First of all: before I´ve installed DOF everything was working fine. Now I encounter following issues:

 

- if I start my tables directly out of Visual Pinball 9.9.0 or VP(PM5) everything works fine:

-> Backglass will be loaded, DOF starts, no problems

 

- if I start my tables out of PinballX (that´s what I used to do): I get an error message (see attached Image)

-> DOF starts (sometimes), Backglass Monitor gets dark, Playfield will be shown with mentioned error

 

This happens only with following tables:

- Indiana Jones VP920 MOD 2.0 FS (ij_l7)

- Indiana Jones MOD 2.5 FS PHYSMOD5_NM (ij_l7)

- STTNG_VP990_HD_GI_MOD_1.3:Physmod_FOM (sttng_x7)

- Jurassic Park (Data East 1993) UW_LW_Dark-Javier_PM5_1.1 (jupk_513)

 

I will also attach my DOF Settings as well as my PinballX Settings.

Maybe someone has a good clue for me. Many thanks in advance.

 

Kind regards,

Jannek

Attached Files

•  Fehlermeldung.jpg   189.15KB   8 downloads
•  DOF.zip   9.33KB   7 downloads
•  PinballX.zip   3.59KB   7 downloads

[Outhere]

Hello everybody,

 

two days ago I´ve installed DOF on my Computer - I´m using it with a PinControl1 and just one RGB-Strip is my Output.

Most of my tables are working fine, but there´s strange behaviour on some other tables.

 

First of all: before I´ve installed DOF everything was working fine. Now I encounter following issues:

 

- if I start my tables directly out of Visual Pinball 9.9.0 or VP(PM5) everything works fine:

-> Backglass will be loaded, DOF starts, no problems

 

- if I start my tables out of PinballX (that´s what I used to do): I get an error message (see attached Image)

-> DOF starts (sometimes), Backglass Monitor gets dark, Playfield will be shown with mentioned error

 

This happens only with following tables:

- Indiana Jones VP920 MOD 2.0 FS (ij_l7)

- Indiana Jones MOD 2.5 FS PHYSMOD5_NM (ij_l7)

- STTNG_VP990_HD_GI_MOD_1.3:Physmod_FOM (sttng_x7)

- Jurassic Park (Data East 1993) UW_LW_Dark-Javier_PM5_1.1 (jupk_513)

 

I will also attach my DOF Settings as well as my PinballX Settings.

Maybe someone has a good clue for me. Many thanks in advance.

 

Kind regards,

Jannek

Pinball X may not like the way your files are named - try renaming them

[Jannek42]

I´ve already tried that... I named (just for testing purposes) the files of the STTNG Table:

- NightMod.vpt

- NightMod.directb2s

 

No changes. Same effect.

 

Before I´ve installed DOF the tables were working fine with those names in PinballX.