86 replies to this topic

[javier1515]

Update  table to VP9.2

[Sheltemke]

Thank you javier1515!

[skinooe]

great thanks

[Newer]

Perfekt Match....Thanks alot alot alot from Good Old Germany.....

[gogo69]

thank you very much javier1515 ! sooooo coool !!!

one thing though when you look at the flipper logos and flip left and right alternating - looks like the logo and the flipper don't turn at the same time,

it looks like the timing is minimal out of sync .. or am i crazy ? can you see it too ?  it's best seen if you alternating flip left and right

Edited by gogo69, 14 January 2014 - 06:35 PM.

[marco helmink]

i am having a problem when using the UVP setting:

Const cController = 2 'Choose Controller: 1-VPM, 2-UVP, 3-B2S
 

i get a vbscript error:

object dosnt support this property or method

 

works fine with VPM selected

Also by the twister table

 

I have the latest version of vp 9.2.1

Edited by marco helmink, 14 January 2014 - 09:52 PM.

[Shadowsclassic]

 

i am having a problem when using the UVP setting:

Const cController = 2 'Choose Controller: 1-VPM, 2-UVP, 3-B2S
 

i get a vbscript error:

object dosnt support this property or method

 

works fine with VPM selected

Also by the twister table

 

I have the latest version of vp 9.2.1

 

Just use the B2S version it works great and doesn't tax your system like UVP.  If you think it is too dark you can always use the editor and just lighten the image to suit. It's simple enough that I can do it. Lol.

[marco helmink]

Sorry i don't use b2s at all.

 

Now i'm running in vpm mode.

The led strips on the ramp are very very awesome ''better than the real hook pinball table''

 

PROBLEM: when the skull flashes, i have no flashing skull but a few white blocks flickering (what is this??)

 

The rest is very good, i love this table.

[javier1515]

Sorry my mistake ,  in the ramp "Skull_b1"  have to dial normal Stereo 3D option and the other error I found this on line 1178

 

This change:

 

   StopSeqLeds Sub ()

'For each xx in Leds1: xx.state = 0: next

'For each xx in LEDS2: xx.state = 0: next

  For each xx in Leds1: xx.Alpha = 1: next

  For each xx in LEDS2: xx.Alpha = 0: next

     SeqLedsTimer.Enabled = 0

   End Sub

 

by this one:

 

   StopSeqLeds Sub ()

'For each xx in Leds1: xx.state = 0: next

'For each xx in LEDS2: xx.state = 0: next

  For each xx in Leds1: xx.Alpha = 0: next

  For each xx in LEDS2: xx.Alpha = 0: next

     SeqLedsTimer.Enabled = 0

   End Sub

 

For when the ball leds strip off completely fence.

 

Cheers, Javier..

[marco helmink]

Thanks i will try tomorrow

[hallman45]

Is there a way to increase the volume of this table?  The volume is a little low on my cab.

 

Great table, thanks.

[ta2686]

To increase the volume for this table, you will need your mouse and keyboard.

 

Click on the PinMAME DMD (score panel) then press the tilde key (key to the left of the 1 key) to open a white box inside the DMD.  Using the up and down arrow keys, scroll through the options until you get to the audio channels.  For each audio channel, use the left and right arrow keys to adjust the channel's volume (left arrow lowers the volume, right arrow raises the volume).  Do this for each audio channel.  When you are finished press the tilde key to close the white box then click anywhere on the table to return focus to the table.

 

I can't guarantee that the volume settings will stay after you exit the table.  Some have stated that after they exit the table then go back to the table the volume settings reverted back to what they were.

[hallman45]

Thanks ta2686, I will give it a try.

[SPARKY70]

hi, new version is looking great.

 is there a way to slow the ball down?. it bounces around so quick, i can hardly keep up with it. last version did not have this happen..thanks. sparky

[troyguitarman]

Playfield dissapears on vp 990 with nvidia 9500gt, DX9. I tried changing playfields to PNG's instead of JPG didn't work. This use to fix my ATI missing graphics. The playfield image flashes likes it is tied to a flasher object! I tried dif vid settings none work! I am using nvidia driver 332.21 don't really want to change drivers. I had problems with later drivers but that was with DX7. Maybe i should update drivers?

 

I just get better preformance with the 332.21 driver

Edited by troyguitarman, 14 June 2014 - 01:59 AM.

[Les73gTx]

Playfield dissapears on vp 990 with nvidia 9500gt, DX9. I tried changing playfields to PNG's instead of JPG didn't work. This use to fix my ATI missing graphics. The playfield image flashes likes it is tied to a flasher object! I tried dif vid settings none work! I am using nvidia driver 332.21 don't really want to change drivers. I had problems with later drivers but that was with DX7. Maybe i should update drivers?
 
I just get better preformance with the 332.21 driver

.
I have the same issue with this table ... I have also not been able to find a fix ... I am waiting to see if anyone has a solution?

Sent from my SAMSUNG-SGH-I747 using Tapatalk

[naboodiver]

Ok... Here is how I think I remember fixing this problem where the playfield would flash on and off (black screen)..    In the image manager, I notice that the old version that use to work had two additional playfield image named (playfield_Gi2 and playfield_gi22).   New version had image Playfield_Gi.    So not very scientific but I imported these two from the old version 1.0 to the new version and poof... Success.   Try it.

[troyguitarman]

Thanks naboo will try tomorrow.

[troyguitarman]

Eye Matey! It does work! Now you don't have to walk the plank! Lets go out and seek some pinball treasures! Is there any Rum left?

I hope Capt Morgan didn't take it all lol

[naboodiver]

I am glad it worked for you.    Go Hoosiers !!!