47 replies to this topic

[eispic]

The last Update from this Great Table (V.1.25.8 ) is't in the Vitual Pinball Spreadsheet. Who can help to change this in the list. In the list is the Version 1.25.7

[Cliffy]

I know its a button on the keyboards. Ive redownloaded multiple times with no luck. Ive set Enter to be the plunger but nothing as well. It literally is the only game that does this. Could it be in the script?

Hit F1 and check Cabinet Mode

[Dankinz]

So I finally got a ball to launch. I hit the B key and it brings up a display box that asks Click YES to add a ball to the trough, NO removes a ball from the trough. You pick yes and it places a 2nd ball in the bottom right of the screen. After pressing the F/nudge and G keys several times the ball will fire. Any ideas. It was on cabinet mode
So the game loads a ball every time. In order to get it to fire I hit the B button which says
Click YES to add ball to Trough, NO to remove.
I add the ball and then there are now 2 balls. The G key will fire but You have to hit the F key to nudge the 2 ball out of they way and then the game tries to fire the ball. After the ball is done you have to add to the trough and rinse repeat
So I finally got a ball to launch. I hit the B key and it brings up a display box that asks Click YES to add a ball to the trough, NO removes a ball from the trough. You pick yes and it places a 2nd ball in the bottom right of the screen. After pressing the F/nudge and G keys several times the ball will fire. Any ideas. It was on cabinet mode
So the game loads a ball every time. In order to get it to fire I hit the B button which says
Click YES to add ball to Trough, NO to remove.
I add the ball and then there are now 2 balls. The G key will fire but You have to hit the F key to nudge the 2 ball out of they way and then the game tries to fire the ball. After the ball is done you have to add to the trough and rinse repeat
So I finally got a ball to launch. I hit the B key and it brings up a display box that asks Click YES to add a ball to the trough, NO removes a ball from the trough. You pick yes and it places a 2nd ball in the bottom right of the screen. After pressing the F/nudge and G keys several times the ball will fire. Any ideas. It was on cabinet mode
So the game loads a ball every time. In order to get it to fire I hit the B button which says
Click YES to add ball to Trough, NO to remove.
I add the ball and then there are now 2 balls. The G key will fire but You have to hit the F key to nudge the 2 ball out of they way and then the game tries to fire the ball. After the ball is done you have to add to the trough and rinse repeat

[STAT]

ah ok crazy Issue - i remember, i had a similar at another Table too, in the Past ...

Try to delete the Flintstones NVRAM File, what you use, and start Table again.

Edited by STAT, 27 January 2023 - 03:06 PM.

[xYx]

I loaded this table into 10.8 and noticed a white area near dino's head.  I removed the white area by changing the properties for the Fl1 light.  I am VERY new at this, but I found the Fl1 light in Layer 1 had some very odd settings.   I found the settings for Fl1 by opening Layer 1, and scrolling to near the bottom of the list.  I double clicked the Fl1 and the properties values were populated.  I then changed the values to match the ones in the photo and the white area was gone.  vpforums will not let me post the photo, but you can find it on vpuniverse at https://vpuniverse.c...3/?tab=comments

[xenonph]

I loaded this table into 10.8 and noticed a white area near dino's head.  I removed the white area by changing the properties for the Fl1 light.  I am VERY new at this, but I found the Fl1 light in Layer 1 had some very odd settings.   I found the settings for Fl1 by opening Layer 1, and scrolling to near the bottom of the list.  I double clicked the Fl1 and the properties values were populated.  I then changed the values to match the ones in the photo and the white area was gone.  vpforums will not let me post the photo, but you can find it on vpuniverse at https://vpuniverse.c...3/?tab=comments

Click the "VPF Image Host" tab at top of forum page.

This is how you upload photos to VPForums.

 

A window will pop up, and you click Browse to select your pic, and then click Upload.

Then it is a simple copy and pasting of links given in window.

[xYx]

 

I loaded this table into 10.8 and noticed a white area near dino's head.  I removed the white area by changing the properties for the Fl1 light.  I am VERY new at this, but I found the Fl1 light in Layer 1 had some very odd settings.   I found the settings for Fl1 by opening Layer 1, and scrolling to near the bottom of the list.  I double clicked the Fl1 and the properties values were populated.  I then changed the values to match the ones in the photo and the white area was gone.  vpforums will not let me post the photo, but you can find it on vpuniverse at https://vpuniverse.c...3/?tab=comments

Click the "VPF Image Host" tab at top of forum page.

This is how you upload photos to VPForums.

 

A window will pop up, and you click Browse to select your pic, and then click Upload.

Then it is a simple copy and pasting of links given in window.

 

THANK YOU!  Hopefully this works.

 

[digitalarts]

Thanks xYx for your finding