26 replies to this topic

[HiRez00]

The LW3 update looks great. I owned the real pin for about 8 years (wish I didn't sell it) and this is the closest VPX version I've played.

 

Just an observation - cuz it might be my eyes - but it looks like some of the wire rollovers in the upper and lower lanes aren't lined up with the playfield artwork holes. However, It doesn't affect gameplay at all.

 

Thanks for the update.

[wrd1972]

I have limited access to lw3. Send me a laundry list of what you need. I will give it a shot.

[32assassin]

the only thing that needs to be scripted or is still an WIP

 

sw52

don't know where it goes or if its even on the table

as mentioned its not scoring any points when hit

 

Sol  10   PPB board

this is mapped to a coil but I do not know what it does;  its not currently mapped

 

Javier has Sol 10 mapped to he GI light but the GI light is Sol 11

the lower left Dome mapped to Sol 11 witch is not right.

 

Sol 14   Mars light,    not mapped in the service manual.

 

Sol 10 or Sol 14  

one or the other has to control the Beacon Light ,  but we need to confirm witch one

 

The Beacon light is not currently mapped.

 

 

I made some more updates to the table

 

the ramps are now flush with the primitives

 12.PNG   430.02KB   3 downloads

 

 

added   a few other things.

 

 

To do ( I'm leaving as is but would like to  update this)

 

Primitive Plunger cover

I added Rascals plunger primitive  but would like to rebuild a more  accurate one

 

Primitive Bumper covers

we need an over head pic of the Data East bumper caps

https://www.thepinba...ap-545-5035-22/

 

 

Map  Sol 10 and Sol 14

 

 

 Capture.PNG   1.47MB   3 downloads

Edited by 32assassin, 31 July 2020 - 01:45 AM.

[roccodimarco]

32, my neighbor has a royal rumble machine.  Are these the same bumper caps? I can probably get a nice picture of them 

[kiwi]

Solenoid 10 drives a relay that switches between left and right, or normally open or normally closed, or between coils and flashers,
two things can be powered with the same solenoid, depending on the position of the solenoid 10.
In VPinMame there is no need to use solenoid 10 because all solenoids, coils and flashers, are available separately.

 
Other on the sw52, the manual is not even mentioned as a spare part.

 
Bumper cap

 CapDE.zip   250.06KB   3 downloads

[wrd1972]

Hey 32,

I just sent your request to have the switch/solenoid questions looked at. No idea when this might happen. I also requests a ton of pics to be taken too. I will be in touch.

 

BTW I think I provided some ultra high pics of the LW3 plastics to Cyberpez. Might check with him if you want them.

[cyberpez]

This is what I have for LW3..  

 

https://www.dropbox....5H9oRt4DNa?dl=0