96 replies to this topic

[BlackPredator72]

And here comes the wood cut in pieces (Williams plans by Mameman) :

 

 

Also bought an (small) ATX case so the computer parts (videocards) will stay upright :

 

 

Only 1 problem, the PSU won't fit cause of the 2 big cards...

Edited by BlackPredator72, 13 January 2017 - 08:39 PM.

[MTPPC]

It's common to remote mount the PSU and thread the power cable through the case.

[BlackPredator72]

Bought some used pinball legs, coindoor, custom made replay knocker and brackets :

 

Edited by BlackPredator72, 13 January 2017 - 08:40 PM.

[BlackPredator72]

And again the postman brought me some stuff, this time from Canada (thanks Steve - http://www.zebsboards.com/ ) :

 

 

 

Now waiting for another shipment from the USA (http://virtuapin.net/) and one from Germany (http://www.pinballce.../pinball-parts/)

Edited by BlackPredator72, 13 January 2017 - 08:41 PM.

[BlackPredator72]

But in the meanwhile...I'm also busy with installing and configuring HyperSpin 1.3.2 and HyperLaunch 3 and a lot of new emulators on my new cabinet....

 

Edited by BlackPredator72, 13 January 2017 - 08:42 PM.

[BlackPredator72]

And again a delivery from Germany ( http://www.pinballce.../pinball-parts/ ) :

 

 

Edited by BlackPredator72, 13 January 2017 - 08:44 PM.

[gerardnl]

get out the tools and start building !

 

"bouwen die hap"

[BlackPredator72]

get out the tools and start building !

 

"bouwen die hap"

I don't have space for an Arcade Cab and a Pinball Cab...so I must rapidly configure and sell my Arcade Cab !

[BlackPredator72]

Accidently ordered a Stern Lockdown bar, returned it and today I get my Williams Lockdown bar.....

 

Edited by BlackPredator72, 13 January 2017 - 08:45 PM.

[Nemo]

Hmmmmmm Selling your Arcade huh, it looks soooo good, must cost an arm & a leg right ?

 

But i AM interested, who knows when i (if ever) finish mine........

 

( I see you are also Dutch, that will take the sting out of shipment)

[BlackPredator72]

Hey Rob, depends how much your arm and leg costs

But I'm still everyday lots of hours of configuring this thing, my HyperSpin Wheel has now 110 emulators and it's almost impossible to have every game, but I do have a lot of them.

In fact I was ready, but then came the new HyperSpin 1.3.2 and HyperLaunch 3 and you can almost start over...pfff...

End is near now though...

Price will be around €1250 I think.

[zebulon]

This is definitely going to be a thread to watch. Nice start Dave....

[BlackPredator72]

Thanx Steve

Edited by Dave72, 28 August 2013 - 10:08 PM.

[BlackPredator72]

And there was the postman again, this time a delivery from the US. And lucky did I was this time !  I didn't had to pay anything for customs, although there was a value of 455 US $ written on the box.

Last time I had a delivery from Canada and I had to pay 142 € (188 US $) for customs at the postman after already paying 128 € (170 US $) for shipping !!! As the Dutch say...a rib out of my body

But I spend already 3000 € (3980 US $) so a few euros (or dollars) more or less......

 

 

Only missing the artwork, but that comes when my table is almost finished..and still waiting for someone who wants to make my Predator Artwork (for money)

And I almost forgot the soundsystem....I do have speakers, but don't have a woofer and amplifier....yet...

And tonight someone is coming to buy my Arcade Cab so then I have room for building my Pin.

Edited by BlackPredator72, 13 January 2017 - 08:47 PM.

[Nemo]

Zeker een rib uit je lijf ! Yeah that was a complete ripoff, those extra custom fees are withholding me from US deliveries.

The person getting the Arcadecab is a lucky guy, it just was not in the cards for me at the moment.  

 

BTW is that a PinLED ?

[BlackPredator72]

Here you can watch a glimp of my Arcade cab with 123 emulators and 40000 games : http://www.youtube.c...h?v=015sN5vj5o0

 

And the DMD is a Vishay DMD LEE-128G032B LED : http://virtuapin.net...&products_id=72

 

 

edit: Arcade Cab is sold !!

Edited by Dave72, 12 September 2013 - 09:27 PM.

[The Loafer]

Dave, that Hyperspin setup is pretty sweet. I criminally neglected my Hyperspin arcade cab while waiting for ver 2.0 but did not realize they were that high on the amount of emulators. Wow! It's almost... Too discouraging to start over, a lot of work there!

[BlackPredator72]

Yeah...I put a lot of time in my HyperSpin project. And hopefully when 2.0 arrives it's in the same style as 1.3.2, because changing from 1.3 to 1.3.2 with HyperLaunch 3 and the new HyperLaunchHQ was like starting all over.

[BlackPredator72]

Finally I've started building my new table....

 

Edited by BlackPredator72, 13 January 2017 - 08:48 PM.

[Nemo]

Sweet !