Download The Simpsons Data East 1990 1.2

Nice table, I got the Apron thing fixed, In VP once you have the table loaded click on the apron part down the bottom and on the right side there is top height and bottom height both set too 85.

I changed them both to 90 and graphics looks the way it should now.

Did it on v1.1 with VP915. hope this helps someone. Now to figure out the DMD rotate for this table

Actually just found out, it worked by just changing it to 86

Will I be able to play this 16x9 on my laptop? 

many thanks for the update. great work

Nice table, I got the Apron thing fixed, In VP once you have the table loaded click on the apron part down the bottom and on the right side there is top height and bottom height both set too 85.

I changed them both to 90 and graphics looks the way it should now.

 

Did it on v1.1 with VP915. hope this helps someone. Now to figure out the DMD rotate for this table

 

Actually just found out, it worked by just changing it to 86

Thanks for this.

I was haveing the same problem.  Fixed now.  Just for anyone reading this who is new to VP, you need to open the table in Vpinball (editor) and make sure you have options enabled (on the left hand menu), then click on the apron and described above.  The setting to be changed will appear in the dialogue on the right of the screen.

Good luck!

This version of this table is a big upgrade, you did a great job polishing this turd of a table, by that I mean this table is old enough that it's from back before simpsons had refined it's artwork and animation and was still pretty sloppy.  Someone else mentioned on an older version that "this is why they had to make Simpsons pinball party, to get it right the second time" and previous versions had horrible resolution artwork making them not worth  anyone's time to add to their cabs.  The only thing I think this table needs for a final improvement is the nuclear silos need to be re-done.  I don't have any background in making VP tables but I do have some background in visual arts and 3D modelling/animation, I'd be glad to make some silos for this table if someone were interested in adding them.  You can see what they should look like from this picture here....it wouldn't be hard for me to make models and animate some still frames to match the table...

http://www.ipdb.org/...158&picno=18861

table works perfectly for me.  5 stars!!

Good day is it possible to extract everything execpt the playfield? if so what is the procedure? thanks