Jump to content



Photo
- - - - -

directoutputshapes DOF


  • Please log in to reply
No replies to this topic

#1 mistermixer

mistermixer

    Enthusiast

  • Members
  • PipPipPip
  • 202 posts

  • Flag: Belgium

  • Favorite Pinball: eightballdeluxe

Posted 01 August 2026 - 08:40 PM

I recently rebuild my cabinet with new hardware . The superdudeboard from Arnoz is now controlling all the hardware with his Bunny board .    The 2 newly installed ledstrips for playfield left and right are connected to the superdude's board directly.  Setting up all the hardware with the dudes software was simple and all tests are 100 % OK.  The ledstrips info like number of leds, height, direction and dofnumbers ... is also in this software  They test all OK for example rgb, effects ...    For DOF working correctly u have to install Arnoz 32 and or 64 bit directoutput drivers.    On the DOF website I updated all the boards and portnumbers.  1 -  Ledwiz for lightbulbs, 5 flashers, rgb buttons, controlled with directoutputconfig   2 - dudescab board for hardware controlled with directoutputconfig90    3 -  WS2811 for the ledstrips controlled with directoutputconfig30    ( all created files unblocked )      When playing a table all hardware and ledwiz lights are running as they should.  The ledstrips react also to a DOF event but there are no effects. They light up entirely.   In the port assignments i tried 2 ways :   selecting PF Right Effects MX and Left effecs MX  for port 1 and 4     Second method using combine toys, give a name and select MX effects     Both give the same results.    So I think the DOF events don't react to the DirectOutputShapes.xml. This file is also generated pressing the create config button.    As prove i deleted this DirectOutputShapes.xml and the strips light also up entirely during gameplay.    Does someone has experienced this also and came with a solution ?    When creating the files online could things go wrong ( windows 11 security ?  -   the DOF website not reacting to changed assignments, combo's )    Or a setting in some kind of folder to activate the shapes ?    For the superdude you musn't have a cabinet.xml file, it's forbidden.       Or do these problems occur with a windows security update ?   The pinup software i installed with the baller installer gives an error when trying to open pinup frontend  cause of a windows update ...        THANX 4 pointing me into a solution !!!


Edited by mistermixer, 01 August 2026 - 08:42 PM.