4 replies to this topic

[Flying Dutchman]

I´ve upgraded my cabinet playfield monitor.

 

Is there a global setting where I can change the X & Y coordinates so I don´t have to resize 2000 tables individually?  

 

Thanks in advance!

 

Cheers,

FD.

 

[ammbamtvpinguy]

This can be done in popper (screen settings). You will also need to check Future Pinball, VPX, etc to make sure the right screen and resolution is picked up. 

[Flying Dutchman]

This can be done in popper (screen settings). You will also need to check Future Pinball, VPX, etc to make sure the right screen and resolution is picked up. 

Thanks ammbamtvpinguy, but I´m using PinballY! as a frontend .. I was more thinking of a setting somewhere in files of VPinballX.

 

Cheers,

FD.

 

 

[digitalarts]

Maybe with screenres.txt
There are the values for playfield, Backglass, dmd

[Tesla]

Maybe with screenres.txt
There are the values for playfield, Backglass, dmd

 

Yeah, those resolution coordinates would definitely need to be changed (as they are defined in pixels).

I´m using PinballY! as a frontend .. 

 

 

 

Probably a little re-setup in Pinball-Y, but if so, it is easy.

 

In Windows, be sure your Monitor config layout still "looks similar" as the way before.

 

As for VPX ... I don't remember. It was years ago when I went from 1080p to 1440p (but both were 16:9). Even if I did have to change each-one, it would not have been an ordeal because I've only ever had 20-30 VPX tables I really care about.