There is a lot of info out there from Terry Red about setting up PinEvent V2 tables which are the latest upgrades to his FP tables. He uses Pinup Popper as a Front end.
I have a 2 screen cabinet running PinballX and all current systems (VP9, VP10.7, VP10.8, FP) work fine. The main thing about these PinEvent V2 tables means that the backglass and Arcade Mode must be turned off before launching a PinEvent V2 table. That works fine for me outside of PinballX. I can do it manually. I thought of making a copy of FPLoader.exe to be called FPLoader PE.exe for PinEvent tables and make that another emulator in PinballX. The problem is this turns the required settings off, but they stay off. I have to manually go into one of FPLoader's each time to turn back on the backglass and Arcade Mode for all the non-PinEvent V2 tables.
Is there any definative guides on settings in PinballX that allows for regular FP tables to run with backglass and Arcade Mode on, and then having a different setting for only the PinEvent V2 tables?
Terry Red has created batch files for his PinEvent V2 tables.... Should I just use one of these in the Launch Before/Launch After area of PinballX..... Running PBX 7.00 and all my FP tables run and so do the PinEvent V2 ones if I make the required changes......
Edited by TT11, 12 February 2026 - 10:41 AM.
Top
are all trademarks of VPFORUMS.