4 replies to this topic

[MOZZYL]

I have all the terry red updated tables but I've got 2 where the flipper/bumper sounds come out of the backglass speakers instead of my SSF speakers in my table. Is there a way to change this, the 2 tables are Robocop and Alien.

Thanks

Edited by MOZZYL, 04 June 2025 - 06:13 PM.

[TerryRed]

I have all the terry red updated tables but I've got 2 where the flipper/bumper sounds come out of the backglass speakers instead of my SSF speakers in my table. Is there a way to change this, the 2 tables are Robocop and Alien.

Thanks

 

 

This is covered in my PinEvent Guide (in the "FuturePinball\Setup and Guides" folder). You need to edit your pup settings to change the SSF audio device ID to the device you use for SSF (if you use a second sound device in Windows for SSF).

[MOZZYL]

I did not have them lines in my pup ini so i added them as in the guide and got as far as SoundDeviceIndex=9 and gave up. Nothing changed, in fact nothing changed on anything, VPX SSF and my other Future pinball tables all worked with SSF regardless of

 

what number i put in. What i dont understand is how Indiana jones and blade runner work fine with SSF, i thought these would be the same if my device id was wrong?

Edited by MOZZYL, 07 June 2025 - 11:04 AM.

[TerryRed]

Only FP tables that have been updated for PUP SSF will work with SSF (if pup has been setup correctly for your sound setup). For any table I have updated, that would be PinEvent V2 and PinEvent Lite tables. All PinEvent tables work with SSF the same.

 

Be sure you have the correct pup-pack installed for each table. It must be the latest table with the matching latest pup-pack, or it wont work.

[MOZZYL]

Yep i didnt have the correct Puppack, must have kept the original pup and just updated table when i did them a while back 

 

Thanks Terry......................and thank you for the He_man table, absolute work of art that one