1 reply to this topic

[Noah98]

I have Future Pinball installed and working fine in Popper.  The included Retro Flair table works fine on three screens with full DMD.  However, any other Pinevent V2 table I install, like Sonic Spinball, will only display on two screens.  So, if I choose the three screen BAT file in the pup pack, it still shows the DMD stuff on the backglass.  Other BAT options work fine, but for some reason three screen won't work, with the exception of Retro Flair.   I'm at a loss with this one!

Edited by Noah98, 06 September 2024 - 06:48 PM.

[TerryRed]

I have Future Pinball installed and working fine in Popper.  The included Retro Flair table works fine on three screens with full DMD.  However, any other Pinevent V2 table I install, like Sonic Spinball, will only display on two screens.  So, if I choose the three screen BAT file in the pup pack, it still shows the DMD stuff on the backglass.  Other BAT options work fine, but for some reason three screen won't work, with the exception of Retro Flair.   I'm at a loss with this one!

 

You mean the FullDMD and videos from the table's pup-pack are shown on your third screen, but you can still see FP's Backbox and DMD on your backglass monitor?

 

You are required to disable the FP Backbox when using pup-packs so the FP Backbox won't cover the pup backglass displays (and if you didnt setup FP's Backbox correctly to being with, it may shift everything around if its using the wrong resolution for the backbox, etc). How to disable the FP Backbox per table is covered in the Install Instructions included with every PinEvent table, and in the Popper and Baller Installer Tips Guide included with the FP and BAM Essentials AIO.

Edited by TerryRed, 07 September 2024 - 02:48 AM.