Jump to content



Photo

DOF Not Loading VPX B2S & Addressables

Started By Deacon07 , Dec 25 2023 09:52 PM

  • Please log in to reply
4 replies to this topic

#1 Deacon07

Deacon07

    Neophyte

  • Members
  • Pip
  • 5 posts

  • Flag: ---------

  • Favorite Pinball: Any baseball Machine

Posted 25 December 2023 - 09:52 PM

I am experience multiple issues at this point and I'll do my best to explain and I pray that someone might help me out.

 

Everything was running fine on vpx 10.72. Then I decided to update my B2S and try to gety 10.8 running. Big mistake. By the time I was done nothing worked. So, I set off to redo everything. Fresh install of windows along with the nailbuster install.

 

I finally found out that DOF won't load on 64 bit B2S for unknown reasons and I cannot find a "64 bit" version of DOF. Any suggestions there?

 

Also, now my addressables do not work at all. I run the LED test with DOF and it checks, but I can't test them.  Below is the log file that I have.

 

Pinscape AIO

Knockers and all work with 32 bit software but does not work on 64

No addressables work at all. Adddressables are on the directoutputconfig30 and the pinscape is on directoutputconfig51

 

---------------------------------------------------------------------------------
DirectOutput Version 3.1.7776.42172, built 2021.04.16 23:25
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2023.12.25 13:25:28.027 DirectOutput Logger initialized
2023.12.25 13:25:28.011 Global config filename is "C:\vPinball\VisualPinball\Tables\B2STableSettings.xml"
2023.12.25 13:25:28.027 No global config file loaded
2023.12.25 13:25:28.027 Could not find or load the global config file C:\vPinball\VisualPinball\Tables\B2STableSettings.xml
2023.12.25 13:25:28.027 Loading Pinball parts
2023.12.25 13:25:28.027 Loading cabinet
2023.12.25 13:25:28.027 No cabinet config file loaded. Will use AutoConfig.
2023.12.25 13:25:28.027 Cabinet auto configuration started
2023.12.25 13:25:28.308 Detected and added Pinscape Controller Nr. 1 with name Pinscape Controller 01
2023.12.25 13:25:28.308 Added LedwizEquivalent Nr. 51 with name Pinscape Controller 01 Equivalent for Pinscape Controller Nr. 1, 73
2023.12.25 13:25:28.324 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2023.12.25 13:25:28.324 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2023.12.25 13:25:28.324 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2023.12.25 13:25:28.324 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2023.12.25 13:25:28.339 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2023.12.25 13:25:28.339 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2023.12.25 13:25:28.339 LedWiz-like device at VID=64250, PID=247, product string=Pinscape Controller, manufacturer string=mjrnet
2023.12.25 13:25:28.339 HID caps: usage page=1, usage=4, number of link collection nodes=1, output report byte length=9
2023.12.25 13:25:28.339 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2023.12.25 13:25:28.339 LedWiz-like device at VID=64250, PID=247, product string=Pinscape Controller, manufacturer string=mjrnet
2023.12.25 13:25:28.339 HID caps: usage page=12, usage=1, number of link collection nodes=1, output report byte length=0
2023.12.25 13:25:28.339 Opening 32-bit LedWiz driver...
2023.12.25 13:25:28.355 Detected and added LedWiz Nr. 8 with name LedWiz 08
2023.12.25 13:25:28.355 Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8
2023.12.25 13:25:28.355 Cabinet auto configuration finished
2023.12.25 13:25:28.355 Cabinet loaded
2023.12.25 13:25:28.355 Loading table config
2023.12.25 13:25:28.355 Warning: No table config file found. Will try to load config from LedControl file(s).
2023.12.25 13:25:28.355 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName gldneye
2023.12.25 13:25:28.355 Loading LedControl file C:\DirectOutput\directoutputconfig30.ini
2023.12.25 13:25:28.370 Min DOF Version is 0.8 for file directoutputconfig30.ini
2023.12.25 13:25:28.370 Resolving Tables Variables
2023.12.25 13:25:28.370 Resolving Global Variables
2023.12.25 13:25:30.652 Loading LedControl file C:\DirectOutput\directoutputconfig51.ini
2023.12.25 13:25:30.652 Min DOF Version is 0.8 for file directoutputconfig51.ini
2023.12.25 13:25:30.652 Resolving Tables Variables
2023.12.25 13:25:30.652 Resolving Global Variables
2023.12.25 13:25:30.730 Failed: @ALLRGB@
2023.12.25 13:25:30.730 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Thread: 
2023.12.25 13:25:30.730 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.730 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.730 Warning: Previous exceptions occured in the line fp_ij_ult_pro,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,0,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.730 Failed: @ALLRGB@
2023.12.25 13:25:30.730 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Thread: 
2023.12.25 13:25:30.730 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.730 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.730 Warning: Previous exceptions occured in the line fp_ij_ult_pro,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,0,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.730 Failed: @ALLRGB@
2023.12.25 13:25:30.730 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Thread: 
2023.12.25 13:25:30.730 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.730 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.746 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.746 Warning: Previous exceptions occured in the line fp_ij_ult_pro,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,0,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.746 Failed: @ALLRGB@
2023.12.25 13:25:30.746 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Thread: 
2023.12.25 13:25:30.746 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.746 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.746 Warning: Previous exceptions occured in the line fp_pe_indiana_jones_fge,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,ON I60,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.746 Failed: @ALLRGB@
2023.12.25 13:25:30.746 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Thread: 
2023.12.25 13:25:30.746 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.746 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.746 Warning: Previous exceptions occured in the line fp_pe_indiana_jones_fge,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,ON I60,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.746 Failed: @ALLRGB@
2023.12.25 13:25:30.746 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Thread: 
2023.12.25 13:25:30.746 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.746 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.746 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.746 Warning: Previous exceptions occured in the line fp_pe_indiana_jones_fge,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,ON I60,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.761 Failed: @ALLRGB@
2023.12.25 13:25:30.761 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Thread: 
2023.12.25 13:25:30.761 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.761 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.761 Warning: Previous exceptions occured in the line fp_sw_dsa_ult_pro,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,ON I60,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.761 Failed: @ALLRGB@
2023.12.25 13:25:30.761 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Thread: 
2023.12.25 13:25:30.761 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.761 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.761 Warning: Previous exceptions occured in the line fp_sw_dsa_ult_pro,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,ON I60,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.761 Failed: @ALLRGB@
2023.12.25 13:25:30.761 Warning: Cant parse the trigger part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Could not parse setting @allrgb@ in column data @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Thread: 
2023.12.25 13:25:30.761 EXCEPTION: Message: Exception --> Cant parse the part @ALLRGB@ of the ledcontrol table config setting @allrgb@.
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.761 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.761 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.761 Warning: Previous exceptions occured in the line fp_sw_dsa_ult_pro,@allrgb@,@allrgb@,ON,ON,ON,ON,0,0,@allrgb@,0,0,0,0,0,0,0,ON I60,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON of the ledcontrol file
2023.12.25 13:25:30.855 Failed: I60
2023.12.25 13:25:30.855 Warning: Cant parse the trigger part I60 of the ledcontrol table config setting  I60.
2023.12.25 13:25:30.855 EXCEPTION: Could not parse setting  I60 in column data E122 I60/ I60.
2023.12.25 13:25:30.855 EXCEPTION: Thread: 
2023.12.25 13:25:30.855 EXCEPTION: Message: Exception --> Cant parse the part I60 of the ledcontrol table config setting  I60.
2023.12.25 13:25:30.855 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2023.12.25 13:25:30.855 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2023.12.25 13:25:30.855 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2023.12.25 13:25:30.855 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2023.12.25 13:25:30.855 Warning: Previous exceptions occured in the line megadeth,ON Forest_green/,ON Forest_green/,ON,0,0,0,0,0,ON Forest_green/,0,0,0,0,0,0,0,E122 I60/ I60,E137/,E119 W500/,E102/,E101/,E140/,0,E106/E123/E152|E153|E154|E116 60 I48/,E138/,0,E105/E115|E150|E155|E120|E151|E113 60 I48/ of the ledcontrol file
2023.12.25 13:25:31.074 2 directoutputconfig.ini or ledcontrol.ini files loaded.
2023.12.25 13:25:31.074 Config for RomName gldneye exists in LedControl data. Updating cabinet and config.
2023.12.25 13:25:31.089 Table config loading finished: romname=gldneye, tablename=007 Goldeneye (Sega 1996)
2023.12.25 13:25:31.105 Pinball parts loaded
2023.12.25 13:25:31.105 Starting processes
2023.12.25 13:25:31.105 Initializing cabinet
2023.12.25 13:25:31.105 Debug: Initializing output controllers
2023.12.25 13:25:31.105 Pinscape Pinscape Controller 01 intialized and updater thread started.
2023.12.25 13:25:31.105 Debug: Initializing LedWiz Nr. 08
2023.12.25 13:25:31.105 Pinscape Pinscape Controller 01 updater thread  started.
2023.12.25 13:25:31.105 Pinscape Pinscape Controller 01 updater thread  has connected to Pinscape Pinscape Controller 01.
2023.12.25 13:25:31.105 LedWiz Nr. 08 initialized and updater thread initialized.
2023.12.25 13:25:31.105 Debug: Output controllers initialized
2023.12.25 13:25:31.105 Updater thread for LedWiz 08 started.
2023.12.25 13:25:31.105 Cabinet initialized
2023.12.25 13:25:31.105 Loading shape definition file: C:\DirectOutput\DirectOutputShapes.xml
2023.12.25 13:25:31.183 Framework initialized.
2023.12.25 13:25:31.183 Have fun! :)
2023.12.25 13:25:36.027 Finishing framework
2023.12.25 13:25:36.027 Finishing cabinet
2023.12.25 13:25:36.027 Debug: Finishing output controllers
2023.12.25 13:25:36.043 Pinscape Pinscape Controller 01 updater thread  has disconnected from Pinscape Pinscape Controller 01 and will terminate.
2023.12.25 13:25:36.043 Pinscape Pinscape Controller 01 finished and updater thread stopped.
2023.12.25 13:25:36.043 Debug: Finishing LedWiz Nr. 08
2023.12.25 13:25:36.043 Updater thread for LedWiz 08 terminated.
2023.12.25 13:25:36.059 LedWiz Nr. 08 finished and updater thread stopped.
2023.12.25 13:25:36.059 Debug: Output controllers finished
2023.12.25 13:25:36.059 Cabinet finished
2023.12.25 13:25:36.059 DirectOutput framework finished.
2023.12.25 13:25:36.059 Bye and thanks for using!
 

#2 Wolfman63

Wolfman63

    Hobbyist

  • Members
  • PipPip
  • 21 posts

  • Flag: United States of America

  • Favorite Pinball: Centaur

Posted 26 December 2023 - 12:09 AM

https://nailbuster.c...ctOutputx64.zip


#3 Deacon07

Deacon07

    Neophyte

  • Members
  • Pip
  • 5 posts

  • Flag: ---------

  • Favorite Pinball: Any baseball Machine

Posted 26 December 2023 - 03:58 PM

Awesome. That got me to the knockers working but I still can't call up my addressable LED's. Should I post another log or would there be other suggestions?


#4 Deacon07

Deacon07

    Neophyte

  • Members
  • Pip
  • 5 posts

  • Flag: ---------

  • Favorite Pinball: Any baseball Machine

Posted 26 December 2023 - 11:54 PM

New Log file from DOF. I think I have everthing except for the addressables. It mentions assigning toys to pinscape rather than ledwiz should I do that? can I do that? I believe I have it set up through a Teensy but honestly I can't remember.

 

26-Dec-23 08:39:53.984 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
26-Dec-23 08:39:54.039 - Starting up - version 7.44
26-Dec-23 08:39:54.059 - For support come and visit the community here http://www.vpforums....p?showforum=104
26-Dec-23 08:39:54.074 - Pre-Reading DOFLinx.INI startup config file details
26-Dec-23 08:39:54.259 - DEBUG enabled with showing of window True
26-Dec-23 08:39:58.840 - Joystick # 1 detected : 32 buttons   Z-Axis
26-Dec-23 08:39:58.940 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
26-Dec-23 08:39:58.940 - DOFLinx device:1 Pinscape setup with 73 outputs
26-Dec-23 08:39:58.950 - DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0
26-Dec-23 08:39:58.960 - DOFLinx device:2 LEDWiz setup with 32 outputs
26-Dec-23 08:39:58.970 - This device is probably a PinScape emulating a LEDWiz, if it is, then it is better to assign toys to the Pinscape device not this one
26-Dec-23 08:39:58.985 - Reading DOFLinx.INI startup config file details
26-Dec-23 08:39:58.995 - Turning DEBUG off
26-Dec-23 08:39:59.025 - DEBUG enabled with showing of window True
26-Dec-23 08:39:59.035 - Reading DirectOutputConfig file named C:\DirectOutput\directoutputconfig30.ini
26-Dec-23 08:39:59.140 - Set Debug Privilege = Set OK
26-Dec-23 08:40:00.830 - Stopping ROM
26-Dec-23 08:40:00.860 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
26-Dec-23 08:40:00.860 - DOFLinx device:1 Pinscape setup with 73 outputs
26-Dec-23 08:40:00.870 - DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0
26-Dec-23 08:40:00.885 - DOFLinx device:2 LEDWiz setup with 32 outputs
26-Dec-23 08:40:00.895 - This device is probably a PinScape emulating a LEDWiz, if it is, then it is better to assign toys to the Pinscape device not this one
26-Dec-23 08:53:39.364 - Shutting down
26-Dec-23 08:53:39.427 - Program close
26-Dec-23 08:54:38.796 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
26-Dec-23 08:54:38.831 - Starting up - version 7.44
26-Dec-23 08:54:38.846 - For support come and visit the community here http://www.vpforums....p?showforum=104
26-Dec-23 08:54:38.856 - Pre-Reading DOFLinx.INI startup config file details
26-Dec-23 08:54:39.051 - DEBUG enabled with showing of window True
26-Dec-23 08:54:43.552 - Joystick # 1 detected : 32 buttons   Z-Axis
26-Dec-23 08:54:43.657 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
26-Dec-23 08:54:43.662 - DOFLinx device:1 Pinscape setup with 73 outputs
26-Dec-23 08:54:43.672 - DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0
26-Dec-23 08:54:43.682 - DOFLinx device:2 LEDWiz setup with 32 outputs
26-Dec-23 08:54:43.692 - This device is probably a PinScape emulating a LEDWiz, if it is, then it is better to assign toys to the Pinscape device not this one
26-Dec-23 08:54:43.707 - Reading DOFLinx.INI startup config file details
26-Dec-23 08:54:43.717 - Turning DEBUG off
26-Dec-23 08:54:43.747 - DEBUG enabled with showing of window True
26-Dec-23 08:54:43.757 - Reading DirectOutputConfig file named C:\DirectOutput\directoutputconfig30.ini
26-Dec-23 08:54:43.842 - Set Debug Privilege = Set OK
26-Dec-23 08:54:45.522 - Stopping ROM
26-Dec-23 08:54:45.552 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
26-Dec-23 08:54:45.557 - DOFLinx device:1 Pinscape setup with 73 outputs
26-Dec-23 08:54:45.567 - DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0
26-Dec-23 08:54:45.577 - DOFLinx device:2 LEDWiz setup with 32 outputs
26-Dec-23 08:54:45.587 - This device is probably a PinScape emulating a LEDWiz, if it is, then it is better to assign toys to the Pinscape device not this one
26-Dec-23 08:54:54.514 - Turning DEBUG off
26-Dec-23 08:58:13.341 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
26-Dec-23 08:58:13.388 - Starting up - version 7.44
26-Dec-23 08:58:13.404 - For support come and visit the community here http://www.vpforums....p?showforum=104
26-Dec-23 08:58:13.420 - Pre-Reading DOFLinx.INI startup config file details
26-Dec-23 08:58:13.529 - DEBUG enabled with showing of window True
26-Dec-23 08:58:18.037 - Joystick # 1 detected : 32 buttons   Z-Axis
26-Dec-23 08:58:18.142 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
26-Dec-23 08:58:18.142 - DOFLinx device:1 Pinscape setup with 73 outputs
26-Dec-23 08:58:18.157 - DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0
26-Dec-23 08:58:18.167 - DOFLinx device:2 LEDWiz setup with 32 outputs
26-Dec-23 08:58:18.177 - This device is probably a PinScape emulating a LEDWiz, if it is, then it is better to assign toys to the Pinscape device not this one
26-Dec-23 08:58:18.192 - Reading DOFLinx.INI startup config file details
26-Dec-23 08:58:18.202 - Turning DEBUG off
26-Dec-23 08:58:18.232 - DEBUG enabled with showing of window True
26-Dec-23 08:58:18.237 - Reading DirectOutputConfig file named C:\DirectOutput\directoutputconfig30.ini
26-Dec-23 08:58:18.287 - Set Debug Privilege = Set OK
26-Dec-23 08:58:20.032 - Stopping ROM
26-Dec-23 08:58:20.062 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
26-Dec-23 08:58:20.062 - DOFLinx device:1 Pinscape setup with 73 outputs
26-Dec-23 08:58:20.077 - DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0
26-Dec-23 08:58:20.087 - DOFLinx device:2 LEDWiz setup with 32 outputs
26-Dec-23 08:58:20.097 - This device is probably a PinScape emulating a LEDWiz, if it is, then it is better to assign toys to the Pinscape device not this one
26-Dec-23 08:58:26.908 - Turning DEBUG off

#5 Deacon07

Deacon07

    Neophyte

  • Members
  • Pip
  • 5 posts

  • Flag: ---------

  • Favorite Pinball: Any baseball Machine

Posted 27 December 2023 - 02:56 PM

I got it figured out. With the reset it set a different com port for the teensy. Had to change that and make sure I had the b2sserver xml in the 64 bit DOF folder as well to point it in the right direction. Back to normalish. Just have to figure out these wild audio swings/volume setups and I should be back to normal. 


Back to VPinMAME


  1. VPForums.org
  2. → Emulation Station
  3. → VPinMAME
  4. Privacy Policy
  5. Board Rules ·