18 replies to this topic

[yukoncharlie2]

All of my FP tables will load and play fine for the first game.  Then, as soon as the last ball is done, the table just doesn't reset for a new game.  Sometimes, the flippers and launch buttons will cause sound effects on the table instead of power their respective components.  It does this for every FP table, whether I run it through FPloader or PinballX.  Any suggestions are GREATLY appreciated, as I'm absolutely at my wit's end!  I've double-checked to make sure all applications are set to run as administrator, and have made sure all .dll files are unblocked.

[MajorFrenchy]

Troubleshooting is one of the most tidious task and can be very frustrating.

I don't have an exact solution for your described problem, bit here's what I would do.

1. I would disconnect all usb perriferals. Except for Keyboard and mouse

2. I would close everything and restart windows

3. Disconnect monitor 2 and 3 and only leave the playfiled.

4. Launch Future pinball and not bam.

5- in the settings set it only to 1 screen and disable backglass and arcade mode.

Launch the game

You will see how it behaves, it it does the same thing at least you have just eliminated a bunch of possibly. What I would say is re install from the original file found on the Future Pinball website and try again.

If it plays fine I would slowly start reconnecting your components 1 at a time and test it.

Sent from my SM-G965W using Tapatalk

[yukoncharlie2]

Ok, I'll give that a try. I'm only at the software phase currently, so only have keyboard, mouse, and 2 monitors running things. I appreciate the help tremendously, and also owe you a huge thanks for your tutorials, as they're truly bringing me through this project!

[MajorFrenchy]

This site is a great help and everyone on it is so helpful. Everyone has their specialty as it is very difficult to be good at everything.

Just report back if you find out as someone else will eventually have the same issues.

Sent from my SM-G965W using Tapatalk

Edited by MajorFrenchy, 02 April 2019 - 01:15 PM.

[GeorgeH]

You might open the FP editor and open the "Video / Rendering Options" and make sure you have "Vertical Sync" checked.

[yukoncharlie2]

Ok, so I'm able to get the tables to work launching with the Future Pinball exe. For some reason, launching with fploader doesn't display the DMD or the pop up window to enter initials at the end of the game (which is where it's been getting hung up and not starting a new game). I'm going to try to do a fresh download and install of BAM to see if that might fix my problem. Again, I greatly appreciate all the help, and any other suggestions on this issue are welcome.

[Mustang1961]

You might open the FP editor and open the "Video / Rendering Options" and make sure you have "Vertical Sync" checked.

... and set the Model Quality to "high"

[yukoncharlie2]

I have both vertical sync and high quality models checked. It just seems like BAM isn't playing nice with FP. It won't display the DMD on the backglass, and won't pop up the 'enter your initials' windows at the end of the game. This is so frustrating, as I've completely uninstalled and reinstalled FP and BAM straight from their respective sites. Thank you all so much for your suggestions, and I welcome any others you might end up thinking of. Willing to try ANYTHING at this point lol...

[Outhere]

Some info

https://www.vpforums...=38170&p=381730

[GeorgeH]

You might try running this: https://www.ravarcad...P-BAM-setup.exe It installs FP and BAM at the same time and often fixes problems. You can run it even though you have it installed already. You might want to read my guide here: http://gopinball.com...php?f=84&t=6054

[yukoncharlie2]

Thanks so much, everyone! I will try a fresh install of FP + BAM this evening to see if that fixes things.

[yukoncharlie2]

Ok, I uninstalled FP and BAM, and did a fresh install of the 2 in 1. I am still having the exact same problems running things from fploader. No DMD displays, and high score screen doesn't pop up so I can't finish any games. Feeling utterly defeated...

[yukoncharlie2]

I can't believe it's taken me this long to notice (suppose it's obvious by now this isn't my forte...), but BAM is crashing and I have a crash report. I haven't been able to discover anything concrete as to what this error code means or how to resolve it though.

 

The report is as follows:

 

------------------- BAM crash-report -------------

  BAM path: C:\Pinball\Future Pinball\BAM

       XML: C:\Pinball\Future Pinball\Tables\TWDProX(v1.10)_p2.7.xml

     table: C:\Pinball\Future Pinball\Tables\TWDProX(v1.10)_p2.7.fpt

         1: TAG: FILE=dllmain.cpp, LINE=1110, FUNC=Routed_LockResource

         2: TAG: FILE=dllmain.cpp, LINE=500, FUNC=Routed_SwapBuffers

       SBC: -1

       NFC: 0

Loaded modules:

Future Pinball.exe, 1.9.2013.25 : 00400000 - 01E32000

ntdll.dll, 6.1.7601.24387 : 77800000 - 77942000

kernel32.dll, 6.1.7601.24387 : 77190000 - 77265000

KERNELBASE.dll, 6.1.7601.24387 : 75670000 - 756BB000

COMCTL32.dll, 6.10.7601.24380 : 740F0000 - 7428E000

msvcrt.dll, 7.0.7601.17744 : 75BB0000 - 75C5C000

GDI32.dll, 6.1.7601.24308 : 75B40000 - 75B8E000

USER32.dll, 6.1.7601.23594 : 77010000 - 770D9000

LPK.dll, 6.1.7601.24280 : 758B0000 - 758BA000

USP10.dll, 1.626.7601.23894 : 76E50000 - 76EED000

SHLWAPI.dll, 6.1.7601.17514 : 77950000 - 779A7000

fmod.dll, 3.7.4.0 : 10000000 - 10096000

ADVAPI32.dll, 6.1.7601.24387 : 758D0000 - 75971000

sechost.dll, 6.1.7601.18869 : 75B20000 - 75B39000

RPCRT4.dll, 6.1.7601.24387 : 770E0000 - 77182000

MSACM32.dll, 6.1.7600.16385 : 72540000 - 72554000

WINMM.dll, 6.1.7601.17514 : 722B0000 - 722E2000

ole32.dll, 6.1.7601.24383 : 75D00000 - 75E5F000

WSOCK32.dll, 6.1.7600.16385 : 6DFF0000 - 6DFF7000

WS2_32.dll, 6.1.7601.23451 : 76EF0000 - 76F25000

NSI.dll, 6.1.7601.23889 : 77A00000 - 77A06000

Newton.dll,  : 01EB0000 - 01F21000

libcurl.dll, 7.13.1.0 : 01F30000 - 01FCD000

COMDLG32.dll, 6.1.7601.17514 : 76F30000 - 76FAB000

SHELL32.dll, 6.1.7601.24234 : 76200000 - 76E4C000

OLEAUT32.dll, 6.1.7601.24383 : 75C60000 - 75CF2000

DevIL.dll, 0.1.6.5 : 01FD0000 - 02143000

ILU.dll, 0.1.6.5 : 00280000 - 00293000

ILUT.dll, 0.1.6.5 : 00020000 - 0002D000

GLU32.dll, 6.1.7600.16385 : 65710000 - 65732000

OPENGL32.dll, 6.1.7600.16385 : 645A0000 - 64668000

DDRAW.dll, 6.1.7600.16385 : 62280000 - 62367000

DCIMAN32.dll, 6.1.7601.24280 : 6E820000 - 6E826000

SETUPAPI.dll, 6.1.7601.17514 : 75980000 - 75B1D000

CFGMGR32.dll, 6.1.7601.17514 : 75860000 - 75887000

DEVOBJ.dll, 6.1.7600.16385 : 75650000 - 75662000

dwmapi.dll, 6.1.7601.18917 : 73D70000 - 73D83000

WININET.dll, 11.0.9600.19301 : 773C0000 - 777F6000

api-ms-win-downlevel-user32-l1-1-0.dll, 6.2.9200.16492 : 75640000 - 75644000

api-ms-win-downlevel-shlwapi-l1-1-0.dll, 6.2.9200.16492 : 755A0000 - 755A4000

api-ms-win-downlevel-version-l1-1-0.dll, 6.2.9200.16492 : 75850000 - 75854000

version.DLL, 6.1.7600.16385 : 74B00000 - 74B09000

api-ms-win-downlevel-normaliz-l1-1-0.dll, 6.2.9200.16492 : 756C0000 - 756C3000

normaliz.DLL, 6.1.7600.16385 : 758C0000 - 758C3000

iertutil.dll, 11.0.9600.19301 : 75FC0000 - 761F6000

api-ms-win-downlevel-advapi32-l1-1-0.dll, 6.2.9200.16492 : 75830000 - 75835000

USERENV.dll, 6.1.7601.17514 : 75890000 - 758A7000

profapi.dll, 6.1.7600.16385 : 75590000 - 7559B000

DINPUT8.dll, 6.1.7600.16385 : 649D0000 - 64A00000

IMM32.DLL, 6.1.7601.17514 : 75B90000 - 75BAF000

MSCTF.dll, 6.1.7601.23915 : 75EF0000 - 75FBD000

BAM.dll, 1.4.251.0 : 60A20000 - 60FF1000

PSAPI.DLL, 6.1.7600.16385 : 77A40000 - 77A45000

HID.DLL, 6.1.7600.16385 : 73D90000 - 73D99000

renderingengine.dll,  : 60600000 - 60A14000

--------------------------------------------------

Error code 40010006: (unknown)

 

   Address: 7567845D -> KERNELBASE.dll:0000845D

     Flags: 00000000

 

  Fault Occured At $ADDRESS:7567845D ->KERNELBASE.dll:0000845D

         with 06 00 01 40 00 00 00 00 02 00 00 00 00 D1 12 00 35 28 83 12 

 

   Address: 75690611 -> KERNELBASE.dll:00020611

***  0 called from $ADDRESS:75690611

         with 28 47 C5 69 2C 00 00 00 E7 25 98 69 40 C7 80 11 01 00 00 00 

 

   Address: 699826BA -> UNKNOWN:699826BA

***  1 called from $ADDRESS:699826BA

         with 40 C7 80 11 1B 01 00 00 54 AD C4 69 4C AD C4 69 CC DB 84 69 

 

   Address: 6981D312 -> UNKNOWN:6981D312

***  2 called from $ADDRESS:6981D312

         with 02 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 

 

   Address: 1180CA9C -> UNKNOWN:1180CA9C

***  3 called from $ADDRESS:1180CA9C

         with 

 

   Address: 697F3CC0 -> UNKNOWN:697F3CC0

***  4 called from $ADDRESS:697F3CC0

         with 8B C6 5E C2 04 00 CC CC 51 56 57 8B F9 C7 07 1C 40 C5 69 C7 

 

   Address: 00000008 -> UNKNOWN:00000008

***  5 called from $ADDRESS:00000008

 

As always, any help is tremendously appreciated!

[Outhere]

Try what @Glenoz187 did

https://www.vpforums...=42075&p=426628

[yukoncharlie2]

That's taken me a step in the right direction! I uninstalled FP, completely cleared the registry, and then reinstalled the 2-in-1.  Now, the DMD is displaying when playing a table through FPLoader.  I also get a pop up window at the end of the game for entering initials, but it is completely blank.  The game will allow me to make blind selections to get through the initial entry and start a new game.  I do still end up with a BAM CRASH text file after exiting as well.  Just spitballing, but could this be an issue due to lack of memory?  I'm currently running 4GB, and one thread I read seemed to suggest boosting virtual memory could solve certain issues.  I'm assuming adding physical memory would do the same.  Thank you as always!

[GeorgeH]

BAM sometimes generates crash reports when it doesn't need to. Try deleting it and play again top see it it gets generated again. I am guessing the problem is caused by something else on your system. Does the problem occur when you play a table with FP but without BAM?

[Outhere]

Going to 8 GB of memory may help but any more than 8 you're probably just throwing away money...

What are you running for a computer system including video card?

I'm assuming you went over the information In post 9?

Under the video settings did you try Minimum in FP

[yukoncharlie2]

Yes, I've reviewed all of the setup information multiple times and have watched a lot of videos walking through it. I dont think I missed anything, but it's certainly not outside of the realm of possibility. My system is a Dell Optiplex 780 running Windows 7, Q9550 quad core processor, and ATI Firepro V5800 graphics card.

I'll try running it on minimum settings to see if that helps at all. As always, thank you for all the help on this!

[GeorgeH]

 

I can't believe it's taken me this long to notice (suppose it's obvious by now this isn't my forte...), but BAM is crashing and I have a crash report. I haven't been able to discover anything concrete as to what this error code means or how to resolve it though.

 

The report is as follows:

 

------------------- BAM crash-report -------------

  BAM path: C:\Pinball\Future Pinball\BAM

       XML: C:\Pinball\Future Pinball\Tables\TWDProX(v1.10)_p2.7.xml

     table: C:\Pinball\Future Pinball\Tables\TWDProX(v1.10)_p2.7.fpt

         1: TAG: FILE=dllmain.cpp, LINE=1110, FUNC=Routed_LockResource

         2: TAG: FILE=dllmain.cpp, LINE=500, FUNC=Routed_SwapBuffers

       SBC: -1

       NFC: 0

Loaded modules:

Future Pinball.exe, 1.9.2013.25 : 00400000 - 01E32000

ntdll.dll, 6.1.7601.24387 : 77800000 - 77942000

kernel32.dll, 6.1.7601.24387 : 77190000 - 77265000

KERNELBASE.dll, 6.1.7601.24387 : 75670000 - 756BB000

COMCTL32.dll, 6.10.7601.24380 : 740F0000 - 7428E000

msvcrt.dll, 7.0.7601.17744 : 75BB0000 - 75C5C000

GDI32.dll, 6.1.7601.24308 : 75B40000 - 75B8E000

USER32.dll, 6.1.7601.23594 : 77010000 - 770D9000

LPK.dll, 6.1.7601.24280 : 758B0000 - 758BA000

USP10.dll, 1.626.7601.23894 : 76E50000 - 76EED000

SHLWAPI.dll, 6.1.7601.17514 : 77950000 - 779A7000

fmod.dll, 3.7.4.0 : 10000000 - 10096000

ADVAPI32.dll, 6.1.7601.24387 : 758D0000 - 75971000

sechost.dll, 6.1.7601.18869 : 75B20000 - 75B39000

RPCRT4.dll, 6.1.7601.24387 : 770E0000 - 77182000

MSACM32.dll, 6.1.7600.16385 : 72540000 - 72554000

WINMM.dll, 6.1.7601.17514 : 722B0000 - 722E2000

ole32.dll, 6.1.7601.24383 : 75D00000 - 75E5F000

WSOCK32.dll, 6.1.7600.16385 : 6DFF0000 - 6DFF7000

WS2_32.dll, 6.1.7601.23451 : 76EF0000 - 76F25000

NSI.dll, 6.1.7601.23889 : 77A00000 - 77A06000

Newton.dll,  : 01EB0000 - 01F21000

libcurl.dll, 7.13.1.0 : 01F30000 - 01FCD000

COMDLG32.dll, 6.1.7601.17514 : 76F30000 - 76FAB000

SHELL32.dll, 6.1.7601.24234 : 76200000 - 76E4C000

OLEAUT32.dll, 6.1.7601.24383 : 75C60000 - 75CF2000

DevIL.dll, 0.1.6.5 : 01FD0000 - 02143000

ILU.dll, 0.1.6.5 : 00280000 - 00293000

ILUT.dll, 0.1.6.5 : 00020000 - 0002D000

GLU32.dll, 6.1.7600.16385 : 65710000 - 65732000

OPENGL32.dll, 6.1.7600.16385 : 645A0000 - 64668000

DDRAW.dll, 6.1.7600.16385 : 62280000 - 62367000

DCIMAN32.dll, 6.1.7601.24280 : 6E820000 - 6E826000

SETUPAPI.dll, 6.1.7601.17514 : 75980000 - 75B1D000

CFGMGR32.dll, 6.1.7601.17514 : 75860000 - 75887000

DEVOBJ.dll, 6.1.7600.16385 : 75650000 - 75662000

dwmapi.dll, 6.1.7601.18917 : 73D70000 - 73D83000

WININET.dll, 11.0.9600.19301 : 773C0000 - 777F6000

api-ms-win-downlevel-user32-l1-1-0.dll, 6.2.9200.16492 : 75640000 - 75644000

api-ms-win-downlevel-shlwapi-l1-1-0.dll, 6.2.9200.16492 : 755A0000 - 755A4000

api-ms-win-downlevel-version-l1-1-0.dll, 6.2.9200.16492 : 75850000 - 75854000

version.DLL, 6.1.7600.16385 : 74B00000 - 74B09000

api-ms-win-downlevel-normaliz-l1-1-0.dll, 6.2.9200.16492 : 756C0000 - 756C3000

normaliz.DLL, 6.1.7600.16385 : 758C0000 - 758C3000

iertutil.dll, 11.0.9600.19301 : 75FC0000 - 761F6000

api-ms-win-downlevel-advapi32-l1-1-0.dll, 6.2.9200.16492 : 75830000 - 75835000

USERENV.dll, 6.1.7601.17514 : 75890000 - 758A7000

profapi.dll, 6.1.7600.16385 : 75590000 - 7559B000

DINPUT8.dll, 6.1.7600.16385 : 649D0000 - 64A00000

IMM32.DLL, 6.1.7601.17514 : 75B90000 - 75BAF000

MSCTF.dll, 6.1.7601.23915 : 75EF0000 - 75FBD000

BAM.dll, 1.4.251.0 : 60A20000 - 60FF1000

PSAPI.DLL, 6.1.7600.16385 : 77A40000 - 77A45000

HID.DLL, 6.1.7600.16385 : 73D90000 - 73D99000

renderingengine.dll,  : 60600000 - 60A14000

--------------------------------------------------

Error code 40010006: (unknown)

 

   Address: 7567845D -> KERNELBASE.dll:0000845D

     Flags: 00000000

 

  Fault Occured At $ADDRESS:7567845D ->KERNELBASE.dll:0000845D

         with 06 00 01 40 00 00 00 00 02 00 00 00 00 D1 12 00 35 28 83 12 

 

   Address: 75690611 -> KERNELBASE.dll:00020611

***  0 called from $ADDRESS:75690611

         with 28 47 C5 69 2C 00 00 00 E7 25 98 69 40 C7 80 11 01 00 00 00 

 

   Address: 699826BA -> UNKNOWN:699826BA

***  1 called from $ADDRESS:699826BA

         with 40 C7 80 11 1B 01 00 00 54 AD C4 69 4C AD C4 69 CC DB 84 69 

 

   Address: 6981D312 -> UNKNOWN:6981D312

***  2 called from $ADDRESS:6981D312

         with 02 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 

 

   Address: 1180CA9C -> UNKNOWN:1180CA9C

***  3 called from $ADDRESS:1180CA9C

         with 

 

   Address: 697F3CC0 -> UNKNOWN:697F3CC0

***  4 called from $ADDRESS:697F3CC0

         with 8B C6 5E C2 04 00 CC CC 51 56 57 8B F9 C7 07 1C 40 C5 69 C7 

 

   Address: 00000008 -> UNKNOWN:00000008

***  5 called from $ADDRESS:00000008

 

As always, any help is tremendously appreciated!

 

 

This crash report is resolved by BAM Update v352.

 

https://pinballnirva...alroller.21672/

Edited by GeorgeH, 22 August 2022 - 03:03 AM.