141 replies to this topic

[xenonph]

If you are playing in Desktop POV no script change is needed.

If you are playing Cabinet, or VR, then you will need to adjust numbers in the options in script.

 

The options in script start at Line 144

 

'******************************************************************************************
'* TABLE OPTIONS **************************************************************************
'******************************************************************************************

' *** Desktop, VR, or Full Cabinet Options *** These HAVE to be selected depending on the mode you are playing.

const VR_Room = 0 ' 1 = VR Room; 0 = desktop or cab mode,
const cab_mode = 0 ' 1 = cabinet mode (Turns off the desktop backglass score lights; also sets Fluppers 4k cabinet light intensity, and allows for higher cab side rail option)

' *** If using cabinet mode: ***
ForceSiderailsFS = 1 ' 1 = higher siderails in cabinet mode: 0 = does not show higher sides


' *** If using VR Room: ***

const CustomWalls = 0     'set to 0 for Modern Minimal Walls, floor, and roof, 1 for Sixtoe's original walls and floor
const WallClock = 1          '1 Shows the clock in the VR room only   
const topper = 1        '0 = Off 1= On - Topper visible in VR Room only


' *** LUT Lighting Options ***

' 0 = Desktop / Cab default darker setting.  You can override to 1 if you wish.  
' 1 = VR brighter setting (default), Can use for cab/desktop if you want to override to dark
' 2 = VR darker LUT override.

const LUT = 0

 

 

 

So if you were using VR you would change Line 150 from this...

 

const VR_Room = 0 ' 1 = VR Room; 0 = desktop or cab mode,

 

to this ..

 

const VR_Room = 1 ' 1 = VR Room; 0 = desktop or cab mode,

Edited by xenonph, 20 June 2022 - 10:31 PM.

[tiggereth]

So... when I start the table, my entire play field is white. Bumpers are there. the ball is there, it moves, I can smack it with the flippers, but the actual playfield is just white. Any hints?