Jump to content



Photo
* * * * * 1 votes

Project: Glow Pin FINISHED!


  • Please log in to reply
429 replies to this topic

#141 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 09 July 2011 - 05:41 AM

can't really do much now till i get the graphics sorted out. i think i may have finally found a place that will do it i'm taking my designs in on monday to discuss price etc. in the meantime i mounted the 200mm fan on the backdoor. if i can find a grill i'll mount that too i might have to make a custom one. also decided to change the speaker system to a edifer M2600 cos the logitech LS21 just isn't loud enough! tongue.gif

Edited by bladexdsl, 09 July 2011 - 06:17 AM.


#142 Darkfall

Darkfall

    Enthusiast

  • Gold Supporter
  • 453 posts
  • Location:Langley, BC

  • Flag: Canada

  • Favorite Pinball: Attack From Mars, Scared Stiff

Posted 09 July 2011 - 06:51 AM

QUOTE (mameman23 @ Jul 8 2011, 04:06 AM) <{POST_SNAPBACK}>
For shutting down the power do you not have the smart power strips in Oz?

The multiple outlet strips that are Eco friendly and when they sense the monitored device is no longer pulling power it shuts the power to the child outlets.

This is what I run, cost about $30 only need to then wire a single momentary button for the pc.


Say - that's a good idea. Was going to do it with a relay powered by the PC power supply - when the power goes out, it'll trip and kill everything else. The powerbar idea sounds better. I'll check into that! Thanks!

QUOTE (bladexdsl @ Jul 8 2011, 04:17 AM) <{POST_SNAPBACK}>
those things turn the tv off standby which pretty much does the same thing if i turned it off from the wall which causes above problem. screw it i'll just leave the damn things lit all the time.


How odd. My TVs remember that they were on when the power went out, and power back up when they get power again. The only problem I've had is that if the Philips doesn't get a signal for a while, it powers off, and you have to use the remote to turn it back on - but if everything is shut off shortly after the PC shuts down, it's fine.

...Paul


Check out Wildfire Pinball's build details here: Project Wildfire

#143 Lobotomy

Lobotomy

    Enthusiast

  • Members
  • PipPipPip
  • 203 posts

  • Flag: Sweden

  • Favorite Pinball: Terminator 2, High Speed II, Funhouse, Taxi...

Posted 09 July 2011 - 07:34 AM

QUOTE (bladexdsl @ Jul 8 2011, 01:17 PM) <{POST_SNAPBACK}>
those things turn the tv off standby which pretty much does the same thing if i turned it off from the wall which causes above problem. screw it i'll just leave the damn things lit all the time.


Have you tried the "hold_down_the_powerbutton_while_putting_power_on"-trick?'
Both my tv:s turn themselves on if i hold the powerbutton on the tv panel while inserting the powercord into the wall.
I know alot of ppl use the same method.

Project: TeraPin

#144 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 09 July 2011 - 07:42 AM

QUOTE
How odd. My TVs remember that they were on when the power went out, and power back up when they get power again

mine doesnt as soon as you turn it off at the wall it resets itself and have to power on with remote...stupid soniq
QUOTE
Have you tried the "hold_down_the_powerbutton_while_putting_power_on"-trick?'
Both my tv:s turn themselves on if i hold the powerbutton on the tv panel while inserting the powercord into the wall.
I know alot of ppl use the same method.

that's gonna be hard to do when it's in the cab

#145 Darkfall

Darkfall

    Enthusiast

  • Gold Supporter
  • 453 posts
  • Location:Langley, BC

  • Flag: Canada

  • Favorite Pinball: Attack From Mars, Scared Stiff

Posted 09 July 2011 - 09:10 AM

QUOTE (bladexdsl @ Jul 9 2011, 12:42 AM) <{POST_SNAPBACK}>
QUOTE
Have you tried the "hold_down_the_powerbutton_while_putting_power_on"-trick?'
Both my tv:s turn themselves on if i hold the powerbutton on the tv panel while inserting the powercord into the wall.
I know alot of ppl use the same method.

that's gonna be hard to do when it's in the cab


I think he means that if you do that process once, it'll remember that you want it to turn on automatically when power is applied - a sort of secret setting feature. It might work, if it works with other brands. Worth a shot.

...Paul


Check out Wildfire Pinball's build details here: Project Wildfire

#146 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 09 July 2011 - 01:43 PM

didn't work the tv just kept turning on and off as i held the power button down.doesn't matter i'll just have to use the remote to turn the tv on. it'll be the last time i use this tv though in any builds!

Edited by bladexdsl, 09 July 2011 - 03:11 PM.


#147 Darkfall

Darkfall

    Enthusiast

  • Gold Supporter
  • 453 posts
  • Location:Langley, BC

  • Flag: Canada

  • Favorite Pinball: Attack From Mars, Scared Stiff

Posted 09 July 2011 - 06:03 PM

QUOTE (bladexdsl @ Jul 9 2011, 06:43 AM) <{POST_SNAPBACK}>
didn't work the tv just kept turning on and off as i held the power button down.doesn't matter i'll just have to use the remote to turn the tv on. it'll be the last time i use this tv though in any builds!


That's a bummer.

I think my next solution would be to dismantle the remote, build a circuit to momentarily trigger a relay on power up, then connect that relay to the power button of the remote and mount the remote inside pointing at the TV's sensor *grin*. What a pain in the butt, though.
...Paul


Check out Wildfire Pinball's build details here: Project Wildfire

#148 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 10 July 2011 - 01:59 AM

i wouldn't even know where to begin on that tongue.gif

Edited by bladexdsl, 11 July 2011 - 03:21 AM.


#149 webby

webby

    Ukexpat71

  • Platinum Supporter
  • 215 posts

  • Flag: ---------

  • Favorite Pinball: IJ

Posted 10 July 2011 - 02:06 AM

QUOTE (bladexdsl @ Jul 10 2011, 11:59 AM) <{POST_SNAPBACK}>
i wouldn't even know where to begin on that tongue.gif
does anyone know where you can get Mounting Plate Screws for the plunger in oz or what these screws would be called elsewhere? i tried looking on pinball spare parts, mr pinball and quality pinball parts but they don't seem to have them or their named differently. i have some screws here that fit but their 10mm too long. tried getting some screws from the hardware store but the thread is too fat!


Hi,
An idea thats really out there.
Infra red is just sound and I have used sound to emulate an infra red remote control before however, you need to find the right sound file and have it play on windows or hyperpin startup.
Maybe it will work i have not tested, one of my weird ideas.

Webster

#150 koklay2014

koklay2014

    Enthusiast

  • Members
  • PipPipPip
  • 148 posts
  • Location:Pittsburgh Pa.

  • Flag: United States of America

  • Favorite Pinball: William's Magic City

Posted 10 July 2011 - 02:25 AM

Uhmm... I guess it would work in theory but the though part is he need to turn the tv ON and playing the sound IN the system wouldn't that TURN OFF the tv instead...

Just pointing that out whistle.gif

Edited by koklay2014, 10 July 2011 - 02:25 AM.


#151 webby

webby

    Ukexpat71

  • Platinum Supporter
  • 215 posts

  • Flag: ---------

  • Favorite Pinball: IJ

Posted 10 July 2011 - 02:35 AM

Hi,
The computer IS still working without the TV or Monitor on!
The sound, when played at startup (IN THEORY) should turn ON the TV, which was OFF.
Webster

#152 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 10 July 2011 - 09:09 AM

so where do you get the sound than.. ? unknw.gif

#153 webby

webby

    Ukexpat71

  • Platinum Supporter
  • 215 posts

  • Flag: ---------

  • Favorite Pinball: IJ

Posted 10 July 2011 - 11:04 AM

QUOTE (bladexdsl @ Jul 10 2011, 07:09 PM) <{POST_SNAPBACK}>
so where do you get the sound than.. ? unknw.gif

I give you the idea, you do the research. If you want to!
Google it!
webster

#154 rascal

rascal

    two-faced as they come

  • VIP
  • 1,379 posts
  • Location:Indiana USA

  • Flag: United States of America

  • Favorite Pinball: Bally Eight Ball



Posted 10 July 2011 - 11:43 AM

Infrared is not sound, its light. facepalm.gif
http://en.wikipedia.org/wiki/Infrared

EDIT: You would need something like this for the PC to control the TV with IR.
http://www.usbuirt.com/

and some software to control the usbuirt like this.
http://www.promixis.com/

Who knows how much all that would cost you, just to turn the TV on.
I've never seen a power button that when pressed turns the TV on and off continually. If the button is in the pressed position when power to the TV is restored, the TV should come on and stay on.

Edited by rascal, 10 July 2011 - 12:16 PM.

Posted Image


#155 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 10 July 2011 - 11:42 PM

QUOTE (rascal @ Jul 10 2011, 11:43 AM) <{POST_SNAPBACK}>
I've never seen a power button that when pressed turns the TV on and off continually. If the button is in the pressed position when power to the TV is restored, the TV should come on and stay on.

well this one doesn't don''t ever buy a soniq TV nea.gif

#156 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 11 July 2011 - 01:07 AM

Set the apm in the bios to power on after power loss for the computer and solder two lines to the power switch on the tv to extend them to the front of the cabinet and wire them through a switch. I had to do the same for my backbox monitor. I located the switch in the same place that a standard pinball cab would have it's power button.

 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#157 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 11 July 2011 - 03:20 AM

i tried looking for that setting in my bios it doesn't have it. also i've already got a power switch to turn on the computer wired into the m/b. think i'll just use the damn remote.

-edit- the airbrushing is finally getting done the 2 side panels and the 2 side panels of the backbox will take around 2 weeks.

Edited by bladexdsl, 11 July 2011 - 05:44 AM.


#158 Darkfall

Darkfall

    Enthusiast

  • Gold Supporter
  • 453 posts
  • Location:Langley, BC

  • Flag: Canada

  • Favorite Pinball: Attack From Mars, Scared Stiff

Posted 11 July 2011 - 05:46 AM

QUOTE (bladexdsl @ Jul 9 2011, 06:59 PM) <{POST_SNAPBACK}>
i wouldn't even know where to begin on that tongue.gif


Something simpler, perhaps - a button under the cab wired to the TV's power button, so you can turn it on without worrying about the remote or having the sensor visible? That'd be easy to do.

You might also get away with using a 12 volt relay wired to one of the PC's power leads (for a hard drive, or something) wired to the TV's power button - that should kick the TV on when the PC powers up, as long as the TV has power first, which shouldn't be an issue, since most PCs take a moment to notice that they have power and actually feed power to their components. Might be worth a test. Relays are cheap *grin*.
...Paul


Check out Wildfire Pinball's build details here: Project Wildfire

#159 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 11 July 2011 - 08:09 AM

if i keep everything plugged in the tv will auto power on every time but all the lit stiff will stay on though.

#160 bladexdsl

bladexdsl

    Joined the elite ranks

  • Banned
  • PipPipPipPip
  • 1,234 posts
  • Location:Queensland

  • Flag: Australia

  • Favorite Pinball: Scared stiff and Congo

Posted 11 July 2011 - 09:38 AM

QUOTE (bladexdsl @ Jul 11 2011, 08:09 AM) <{POST_SNAPBACK}>
if i keep everything plugged in the tv will auto power on every time but all the lit stiff will stay on though.

can't really do much else till the graphics get back so i decided to mount the coin door and buttons etc

Edited by bladexdsl, 11 July 2011 - 09:38 AM.