447 replies to this topic

[jpsalas]

Hey Pmax65! 

 

I don't know just now, but I'll take a look, I'm almost sure that I reset most of the variables between games. But I'll take a look

[kds70]

All sound issues with 1.02 solved. Don´t understand what the problem was with previous releases (ogg files) but doesn´t matter now.

 

Thank you JP for this AMAZING release

[QuickSave80]

DOF is not working for me. All files have been updated from DOF Config Tool site multiple times to be sure. All other tables work great! The only other table that causes an issue it BAtman 66. DOF works except solenoids. I know solenoids is all that is on this table so perhaps the issue is the same? I am on the latest 10.7 beta release and all files are updated in DOF.

[jpsalas]

DOF is not working for me. All files have been updated from DOF Config Tool site multiple times to be sure. All other tables work great! The only other table that causes an issue it BAtman 66. DOF works except solenoids. I know solenoids is all that is on this table so perhaps the issue is the same? I am on the latest 10.7 beta release and all files are updated in DOF.

 

Try revision 1.02, maybe it will work better.

 

 

All sound issues with 1.02 solved. Don´t understand what the problem was with previous releases (ogg files) but doesn´t matter now.

 

Thank you JP for this AMAZING release

 

Well, there were 5 ogg sounds that were configured for "table" instead of "backglass". But why that should make everything go wrong, I don't know.

[wiesshund]

@wiesshund how did you get the backglass to show the grille to place the DMD onto? Is it as simple as, right-click, VISIBLE for Grille?
​

​

 

@JPSalas did you put 1 or both backglasses in the download?

 

@Dondi, I did 2 backglasses for the table
One for 3 screen only setups that has no grill or anything, mostly for like people using pinDMD's and such since they cant display anything else on the DMD screen but the DMD

or people with 3 screen LCD who prefer a custom DMD frame, like this

 

and one for 2 or 3 screen setups for people with 2 screens and people with 3 screen LCD setups that want a simple DMD frame to place the DMD on
Which is what i posted the picture of you are referring to

 

If you need that backglass, and it isnt in JP's downloads, i put a copy of it here
https://drive.google...iew?usp=sharing
It has the grill as well as a separate DMD frame, depending on your screen setup

[QuickSave80]

 

DOF is not working for me. All files have been updated from DOF Config Tool site multiple times to be sure. All other tables work great! The only other table that causes an issue it BAtman 66. DOF works except solenoids. I know solenoids is all that is on this table so perhaps the issue is the same? I am on the latest 10.7 beta release and all files are updated in DOF.

 

Try revision 1.02, maybe it will work better.

 

 

All sound issues with 1.02 solved. Don´t understand what the problem was with previous releases (ogg files) but doesn´t matter now.

 

Thank you JP for this AMAZING release

 

Well, there were 5 ogg sounds that were configured for "table" instead of "backglass". But why that should make everything go wrong, I don't know.

 

I am on that revision and still nothing.

[kds70]

@QuickSave80. DOF works perfect here with this table and it´s DOF Configs first basic setup.

[dondi]

 

@wiesshund how did you get the backglass to show the grille to place the DMD onto? Is it as simple as, right-click, VISIBLE for Grille?
​

​

 

@JPSalas did you put 1 or both backglasses in the download?

 

@Dondi, I did 2 backglasses for the table
One for 3 screen only setups that has no grill or anything, mostly for like people using pinDMD's and such since they cant display anything else on the DMD screen but the DMD

or people with 3 screen LCD who prefer a custom DMD frame, like this

 

 

and one for 2 or 3 screen setups for people with 2 screens and people with 3 screen LCD setups that want a simple DMD frame to place the DMD on
Which is what i posted the picture of you are referring to

 

If you need that backglass, and it isnt in JP's downloads, i put a copy of it here
https://drive.google...iew?usp=sharing
It has the grill as well as a separate DMD frame, depending on your screen setup

 

@wiesshund ok, I "rolled my own" and am now just seeing your reply. I did download from VPF initially. It was the 3-screen version + the frame file. I have a PIN TWO DMD , so I wanted to turn-off the Pin TWO DMD and move the FlexDMD to the backglass, which I have since done. I used your original image and edited it a little... made the 'DMD window' wider. Created a style for DEADPOOL in DMDext v1.9.7, killed the B2S file and used the new image in both POPPER's MEDIA MANAGER and also as the backglass (I didn't see and animation or anything in the original), by using KEEP DISPLAYS ON.
Just grabbed the B2S in that last link and it looks like different file attributes, so I will give that a go when I get around to it... Hope it is the 2-screen version. Thanks for the upload @wiesshund

Edited by dondi, 17 July 2021 - 07:14 PM.

[batch]

I got the table blocked after a Deadpool multiball, no error message, but loading bar stopped on DMD (just installed VPX_7_beta_rev270_rc)

 

Edited by batch, 17 July 2021 - 06:56 PM.

[jpsalas]

I got the table blocked after a Deadpool multiball, no error message, but loading bar stopped on DMD (just installed VPX_7_beta_rev270_rc)

 

 

 

That's not a loading bar, but Juggernauts life And I guess the ball got trapped behind the droptargets. I see there is a ball on the playfield since the Gi lights are still on, and they go off when all the balls are out I guess all the multiball at the same time is not a good idea I'll take a look and I see if I can add a search ball, when things like this happens

 

@wiesshund how did you get the backglass to show the grille to place the DMD onto? Is it as simple as, right-click, VISIBLE for Grille?
​

​

 

@JPSalas did you put 1 or both backglasses in the download?

 

@Dondi, I did 2 backglasses for the table
One for 3 screen only setups that has no grill or anything, mostly for like people using pinDMD's and such since they cant display anything else on the DMD screen but the DMD

or people with 3 screen LCD who prefer a custom DMD frame, like this

 

 

and one for 2 or 3 screen setups for people with 2 screens and people with 3 screen LCD setups that want a simple DMD frame to place the DMD on
Which is what i posted the picture of you are referring to

 

If you need that backglass, and it isnt in JP's downloads, i put a copy of it here
https://drive.google...iew?usp=sharing
It has the grill as well as a separate DMD frame, depending on your screen setup

 

 

I only got one file from you, which is the one I uploaded, it was called JP's Deadpool 3 screen.directb2s

 

I have uploaded the db2s for 2 or 3 screens, and it is called "JPs Deadpool 2 and 3 screen.directb2s"

Edited by jpsalas, 17 July 2021 - 07:15 PM.

[wiesshund]

 

I got the table blocked after a Deadpool multiball, no error message, but loading bar stopped on DMD (just installed VPX_7_beta_rev270_rc)

 

 

 

That's not a loading bar, but Juggernauts life And I guess the ball got trapped behind the droptargets. I see there is a ball on the playfield since the Gi lights are still on, and they go off when all the balls are out I guess all the multiball at the same time is not a good idea I'll take a look and I see if I can add a search ball, when things like this happens

 

@wiesshund how did you get the backglass to show the grille to place the DMD onto? Is it as simple as, right-click, VISIBLE for Grille?
​

​

 

@JPSalas did you put 1 or both backglasses in the download?

 

@Dondi, I did 2 backglasses for the table
One for 3 screen only setups that has no grill or anything, mostly for like people using pinDMD's and such since they cant display anything else on the DMD screen but the DMD

or people with 3 screen LCD who prefer a custom DMD frame, like this

 

 

and one for 2 or 3 screen setups for people with 2 screens and people with 3 screen LCD setups that want a simple DMD frame to place the DMD on
Which is what i posted the picture of you are referring to

 

If you need that backglass, and it isnt in JP's downloads, i put a copy of it here
https://drive.google...iew?usp=sharing
It has the grill as well as a separate DMD frame, depending on your screen setup

 

 

I only got one file from you, which is the one I uploaded, it was called JP's Deadpool 3 screen.directb2s

 

I have uploaded the db2s for 2 or 3 screens, and it is called "JPs Deadpool 2 and 3 screen.directb2s"

 

That is odd, i looked in the zipfile i had put in google drive, and it has both in it
maybe it didnt download all the way for you or something.

 

About the case of Lil Dp Teabagging Batch (It's Lil Dp, what you expect?)

Maybe a switch on the other side of the targets, if switch is hit then if drain is hit, pop the drop targets down for a couple seconds?

 

That or just have Lil Dp endlessly taunt you, until you loose it and shut off the cab.
It would be very inline with Deadpool LOL
(Not a popular option, but a theme correct one haha)

[pinball lover]

Thanks!! I had Sound Issues but now i downloaded the new version.
Used the newest v10.7 and now everything is fine. 

Edited by pinball lover, 18 July 2021 - 01:17 AM.

[batch]

 

 

I got the table blocked after a Deadpool multiball, no error message, but loading bar stopped on DMD (just installed VPX_7_beta_rev270_rc)

 

 

 

That's not a loading bar, but Juggernauts life And I guess the ball got trapped behind the droptargets. I see there is a ball on the playfield since the Gi lights are still on, and they go off when all the balls are out I guess all the multiball at the same time is not a good idea I'll take a look and I see if I can add a search ball, when things like this happen

 

 

About the case of Lil Dp Teabagging Batch (It's Lil Dp, what you expect?)

Maybe a switch on the other side of the targets, if switch is hit then if drain is hit, pop the drop targets down for a couple seconds?

 

That or just have Lil Dp endlessly taunt you, until you loose it and shut off the cab.
It would be very inline with Deadpool LOL
(Not a popular option, but a theme correct one haha)

 

The table was blocked, so I couldn't do anything but close it

 

But it's not very important, I wasn't on the way to beat my low highscore, this table is very fast, and I'm an old man

 

And I've no cab, I'm a poor lonesome desktop user

[jpsalas]

I'm also a desktop user And old, hahaha. But I'll add a trigger inside and I'll check if a ball is there, but in version 1.02 it already releases the droptargets when you loose the last multiball. But I guess a trigger will be better

[Rajo Joey]

Another fantastic table. I just play a few games and I am fascinated. No problems till now.

Thanks for your neverending support for us pinball fans.

[batch]

No problem during my last 30 plays with version 1.02 (in fact I was still using version 1.01 when I got problems )

 

And thanks for side blades

[jpsalas]

No problem during my last 30 plays with version 1.02 (in fact I was still using version 1.01 when I got problems )

 

And thanks for side blades

 

[jpsalas]

I use webp format because VPX supports it, it handles transparency and the files are much smaller than PNG or JPG (which doesn't handle transparency). If unity doesn't support webp then it should do that Anyway we are several generations away before the unity version is usable To me it is important that the VPX files are small, as they take less space on the disk and can be loaded faster. 

[wiesshund]

why do you use webp format?

 

PNG of demo table playfield
39.5mb

WEBP of demo table playfield at default settings
4.8mb

At no discernable loss of quality, and transparency maintained

 

At pristine photo quality settings
Still only 12.5mb, and you cant tell the difference zoomed in so far you can count the pixels

[Outhere]

What program are you using to convert to WEBP