115 replies to this topic

[Aaron James]

Weird glitch :

If you have 2 balls locked (down by the left flipper) and then get "looped in space"...then manage to get the 2 balls in play up the left ramp to come down to where the other 2 balls are (4 balls locked by left flipper)...the game with stop with a line error code in the script. I'm guessing because it can't recognize/justify 4 balls in the lock mechanism at once. I know this is a long shot and hard to do, but I did it tonight, and just wanted to report this very rare and seldom glitch. Call me Mr. Unlucky...cause I had a good game going too! lmfao

[waspstar]

Think I am gonna have some quality time in the company of Visual pinball tonight with this mod and the new CC Night mode. They both look like superb updates to already good tables. Thank you Uncle Willy for updating this table. Your work is greatly appreciated. Now let the fun begin  

[koadic]

I'm a virtuapin owner, and when I 1st tried to play this table, the analog plunger didnt work on the game.
I changed the pull speed of the original "plunger" from 8 to 1.25, and it works now. It may just be a VirtuaPin thing...no worries.
Just wanted to post in case others had similar experience.

That's weird because that setting is only for using a button to launch the ball and has no bearing on an analog plunger setup at all.

[kruge99]

I'm a virtuapin owner, and when I 1st tried to play this table, the analog plunger didnt work on the game.
I changed the pull speed of the original "plunger" from 8 to 1.25, and it works now. It may just be a VirtuaPin thing...no worries.
Just wanted to post in case others had similar experience.

That's weird because that setting is only for using a button to launch the ball and has no bearing on an analog plunger setup at all.

Yes it is weird, I also had to make this change in order to make my Nanotech plunger launch the ball... still scratching my head over this fix.

 

 

Best Regards,

Todd.

[Arcade4]

Fixed my graphics issue.

It was the Freeimage.dll

Guess I was using an older version.

[DJ Wheels]

I keep getting this error:

Line 343 object doesn't support this method or property 'danceposition(...)image'

[jimmyfingers]

UW used primitives for the dancer so it sounds like maybe your version isn't primitive friendly / current.  Try at least the official VP build 915 or higher.

[chepas]

Wow cheers. This is a BMPR table ?

Yep, it's a BMPR   Any physics MOD I do / work on is typically going to be based on the BMPR at it's fondation.  You can find the familiar status lights - I love so much  - at the bottom of the plunger area (a little less in your face than the center of the apron where I usually place it - al beit getting shrunk over the revisions)

 

Cool, thanks. Had to ask because normaly you see BMPR attached to table name. And yes have played Dracula mod to death and love the mods too. BBB makes it way into my bmpr xml Cheers

[thewool]

Am away with work at the moment but the news of this update is making my flipper fingers itchy!!!

 

Can't wait to get home and play it... cheers for the work!

[DStruct]

I had a ball ghost through the ramp and hang about one inch up. It's only happened once, but I wanted to throw that out there. It wouldn't nudge out, and I had to restart.

I had to adjust the plunger to allow my Nanotech to launch the ball, also. It was too weak, otherwise.

[DJ Wheels]

UW used primitives for the dancer so it sounds like maybe your version isn't primitive friendly / current.  Try at least the official VP build 915 or higher.

I updated to 9.15 and now I get an error that says -

Line: 343 variable is undefined 'Dancerp'

[vulbas]

i use build rev600, no problem for me

https://www.dropbox....VPinball Builds

[DJ Wheels]

I Just tried it with rev600 and I get the same error.

[vulbas]

Try downoload the table again.

[DJ Wheels]

I downloaded it again and now it works, thank you! Table looks and plays great.

-I also had a ball get stuck under the ramp on my very first ball and couldn't nudge it loose.

[Rook]

Sorry for the bump, but on the latest release of BBB (2.0), the tube dance is missing

on my cab. I'm running VP990. Any suggestions would be appreciated as the rest 

of the game looks and plays great!

[Shadowsclassic]

Sorry for the bump, but on the latest release of BBB (2.0), the tube dance is missing

on my cab. I'm running VP990. Any suggestions would be appreciated as the rest 

of the game looks and plays great!

 

it's a glitch with VP9.9.  You can try running it under 9.2 or just wait for an update on the table.

[htamas]

Sorry for the bump, but on the latest release of BBB (2.0), the tube dance is missing

on my cab. I'm running VP990. Any suggestions would be appreciated as the rest 

of the game looks and plays great!

 

See this to fix the tube dancer: http://www.vpforums....=26714&p=262410

[jorro666]

in my vp 9.9 dancer not in tube any ideas?

[boiydiego]

htamas where do i set the depth bias to 50 ?