1002 replies to this topic

[Shadowsclassic]

Don't know what causes it but I have noticed the same problem.  It only happens occasionally, and only when I have installed a new table that I do not have a ROM installed.  When I run it I get the error that I do not have the ROM.  If I go out and get the ROM and install it then click the play button without rerunning VP, I get that behavior.  IF I exit out of VP and run it again with the ROM installed everything works as normal.

I have also gotten that same behavior when I was testing 9.2 tables by closing and then loading a table repeatedly without shutting down VP.  It's almost like a memory leak, as it seems to happen faster with newer, higher graphics tables then it does with older EM tables.

[BorgDog]

Don't know what causes it but I have noticed the same problem.  It only happens occasionally, and only when I have installed a new table that I do not have a ROM installed.  When I run it I get the error that I do not have the ROM.  If I go out and get the ROM and install it then click the play button without rerunning VP, I get that behavior.  IF I exit out of VP and run it again with the ROM installed everything works as normal.

I have also gotten that same behavior when I was testing 9.2 tables by closing and then loading a table repeatedly without shutting down VP.  It's almost like a memory leak, as it seems to happen faster with newer, higher graphics tables then it does with older EM tables.

 

Same here. closing and restarting VP does seem to take care of it and it doesn't occur again.

[dboyrecords]

Great updates! Love love love. Thanks!

[dyopp21]

The link for T2 was dead because it was updated. Here are all links again for all tables that have been modified in the last few days:

 

https://www.dropbox....hysMod.rar?dl=0

https://www.dropbox....hysMod.rar?dl=0

https://www.dropbox....hysmod.rar?dl=0

https://www.dropbox....hysMod.rar?dl=0

 

TOTAN is new but not fully adjusted - I'll do that soon. MM has the catapult fix.

I've had an intermittent issue on the physmod version of T2.  Just a heads up: Occasionally when the ball drains, it gets "lost" under the apron somewhere and fails to register a drained ball.  I've tried shaking the table to see if that will get it to register, but it only tilts and I have to re-start the table.  It's happened to me 3 times over the course of a dozen or so plays (these were played as multi-player games, not sure if that matters, but thought it may be worth mentioning).

[ClarkKent]

Can somebody help to test these two babies?

 

https://www.dropbox....ysMod5.rar?dl=0

https://www.dropbox....ysMod5.rar?dl=0

 

My friend made this and I do not have enough time to test this closely...

[BigBoss]

Evening, Quick question re. Physmod 5: I am presently trying to get Physmod 5 up and running in my cab along with some of the excellent sounding Physmod 5 tables. However, while I run VP 9.9 and Physmod 2 without any problems whatsoever when I run any of the Physmod 5 tables there seems to be some sort of input delay (occasionally there is massive lag between flipper button being pressed and the flipper moving and also delay in plunger firing after pressing the launch button) as well as flippers sticking open - basically making it nigh on unplayable. That said the rest of table seems to play fine and the ball is stutter free. Therefore anyone know what might be causing my delay/lag issues. Do it have to amend the flipper physics settings myself similar to Physmod 2? Thanks in advance.

Make sure in the physmod5 you have max prerendered frames set to 1

[ClarkKent]

Here is the first PhysMod update for WCS94:

https://www.dropbox....ysMod5.rar?dl=0

[ckovanda]

what changes did you make?

[ClarkKent]

Right ramp, flipper settings

[garath]

I got the ball blocked on the left ramp, juste after the magnet, when I go for "the ball 1 locked".

Am I the only one ? 

 

EDIT : Yes, I was not using Physmod5 but Physmod, I'm using a script with pinballX to choose automaticely the good version of VP to launch, but it didn't work LOL Thank you for all this work ! It's amazing !

Edited by garath, 11 November 2014 - 05:19 PM.

[ClarkKent]

Here are some updates of the tables I already posted - WhiteWater plunger ramp now works!

 

https://www.dropbox....ysMod5.rar?dl=0

https://www.dropbox....ysMod5.rar?dl=0

https://www.dropbox....hysMod.rar?dl=0

https://www.dropbox....hysMod.rar?dl=0

 

New - posted for testing reasons only:

https://www.dropbox....d5_B2S.rar?dl=0

https://www.dropbox....YSMOD5.rar?dl=0

https://www.dropbox....ysMod5.rar?dl=0

https://www.dropbox....hysmod.rar?dl=0

 

If anybody of the original authors has a problem with these physics enhancement I will remove them.

[open6l]

Thanks for these. Any chance you can list which table was used as the source for The Addams Family?)

 

thanks

 

Here are some updates of the tables I already posted - WhiteWater plunger ramp now works!

 

https://www.dropbox....ysMod5.rar?dl=0

https://www.dropbox....ysMod5.rar?dl=0

https://www.dropbox....hysMod.rar?dl=0

https://www.dropbox....hysMod.rar?dl=0

 

New - posted for testing reasons only:

https://www.dropbox....d5_B2S.rar?dl=0

https://www.dropbox....YSMOD5.rar?dl=0

https://www.dropbox....ysMod5.rar?dl=0

https://www.dropbox....hysmod.rar?dl=0

 

If anybody of the original authors has a problem with these physics enhancement I will remove them.

[ClarkKent]

Melon's beta release was the base of the TAF table.

[gigalula]

Thanks for the few new PM5 version I'll try all of them during the weekend

[ClarkKent]

Please reload TOM - new POV and fixed flashers...

[ringorian]

Please reload TOM - new POV and fixed flashers...

 

Nice !

Edited by ringorian, 15 November 2014 - 09:27 AM.

[ringorian]

CV doenst start, get Typenkonflikt BigBallImage ...

An hint ?

[ringorian]

On TOM the Ball hangs between something and the left bumper ..

[Knorr]

CV doenst start, get Typenkonflikt BigBallImage ...
An hint ?

start it first with last vp dx7 and then again with pm5. regestry error...

[CARYNKYRIAKIDES]

hi Clark is there a mod for big brave or any other EM TABLES?