70 replies to this topic

[deadmanworking]

@thestreetzking look a few posts above yours

[thestreetzking]

@thestreetzking look a few posts above yours

 oh man cant believe i missed that! ill try and set that up tomorrow!

[thestreetzking]

@thestreetzking look a few posts above yours

ok so that gave me the dmd perfectly, however it takes away the pup videos, is that what you did and just ran the stock stern backglass? 

[deadmanworking]

Yes I do run it with backglass but the PUP videos get shown also, they are displayed in the DMD area, overlaying the scoreboard.

I figure that's what it's supposed to be like on the real table as well? 

 

[thestreetzking]

oh mine looks way different, so heres my issue, I can get the backglass to work with the dmd showing like a regular DMD table size wise

if I use your settings for the "info 1" it gives me both the dmd and pup working but it takes up almost 3/4 my screen, so I need to figure what values to use, I have a 24" 1920x1080 display for my backbox monitor at this time

 

 

*also stupid random question, does the left most lane spinner work? mine seems to just be a bar and blocks the ball from going around the orbit

Edited by thestreetzking, 11 October 2025 - 03:30 PM.

[deadmanworking]

Sorry mate looks like this was the old setup with big DMD, for the look with backglass up top and small DMD the correct settings should be:(assuming your playfield is also 1920px width)

[INFO1]
ScreenXPos=1920
ScreenYPos=720
ScreenWidth=1920
ScreenHeight=360

[INFO2]
ScreenXPos=1920
ScreenYPos=0
ScreenWidth=1920
ScreenHeight=720

This should make it so the backglass (INFO2) takes up the upper 2/3 of the screen and the DMD and videos the lower 1/3.
Let me know if it works!

[thestreetzking]

ok so that gives me the DMD/Videos on the lower 1/3 but it stretches the entire bottom of the screen. and my backglass is still full screened. I think that might be a setting I have for exclusive FS? i dont remember. Its closer. Is info 1 the dmd or info 2?

Sorry mate looks like this was the old setup with big DMD, for the look with backglass up top and small DMD the correct settings should be:(assuming your playfield is also 1920px width)

[INFO1]
ScreenXPos=1920
ScreenYPos=720
ScreenWidth=1920
ScreenHeight=360

[INFO2]
ScreenXPos=1920
ScreenYPos=0
ScreenWidth=1920
ScreenHeight=720

This should make it so the backglass (INFO2) takes up the upper 2/3 of the screen and the DMD and videos the lower 1/3.
Let me know if it works!

[deadmanworking]

Aight.. If your backglass is coming from b2s file you'll need to add a .res file resizing it only to the upper 2/3. (I.e. Height of 720)
And for the DMD area try this:

[INFO1]
ScreenXPos=2340
ScreenYPos=720
ScreenWidth=1080
ScreenHeight=360

[thestreetzking]

Really really appreciate the help, just want to let you know. I'll try these out in a few mins and let ya know. How do I make a res file for the b2s

Aight.. If your backglass is coming from b2s file you'll need to add a .res file resizing it only to the upper 2/3. (I.e. Height of 720)
And for the DMD area try this:

[INFO1]
ScreenXPos=2340
ScreenYPos=720
ScreenWidth=1080
ScreenHeight=360

[deadmanworking]

Copy screenres.txt (this is the global b2s setting for all tables) and place it along the table file and name it exactly the same, like Bksor.res or whatever the table is called. Edit the .res file so line 3 and 4 say 1920 and 720, this is your new backglass size, line 1 and 2 are the playfield dimensions, leave them. This should work!

[thestreetzking]

that worked perfect!!! thank you soo soo much. Stoked on this

Copy screenres.txt (this is the global b2s setting for all tables) and place it along the table file and name it exactly the same, like Bksor.res or whatever the table is called. Edit the .res file so line 3 and 4 say 1920 and 720, this is your new backglass size, line 1 and 2 are the playfield dimensions, leave them. This should work!