63 replies to this topic

[htamas]

I'd suggest to drive both monitors from the GTX 660 (and maybe even disable the onboard video).

Also, try to play around with region optimization and region updates in VP video options. Start with turning both off and if you have problems, start changing things.

This table works perfect on my system and my processor is weaker than yours (a Phenom II at 3.4 GHz). Video card is a GTX560. I have region updates/optimization both turned off. Table has no graphics glitches and plays very smooth. I'm on XP though, with an ancient nvidia driver.

 

Edit: I'd also turn off adaptive vsync (set it to 0) and see if it helps.

Edited by htamas, 31 January 2014 - 02:55 AM.

[bubbak]

I ended up downloading the table again and replacing my copy.. and it worked. I think I screwed up messing with the script to set up the controller. I didnt realize the menu made the changes.. So everything works awesome. The table is awesome.. Thanks for all the hard work to make this one.

I'd suggest to drive both monitors from the GTX 660 (and maybe even disable the onboard video).

Also, try to play around with region optimization and region updates in VP video options. Start with turning both off and if you have problems, start changing things.

This table works perfect on my system and my processor is weaker than yours (a Phenom II at 3.4 GHz). Video card is a GTX560. I have region updates/optimization both turned off. Table has no graphics glitches and plays very smooth. I'm on XP though, with an ancient nvidia driver.

 

Edit: I'd also turn off adaptive vsync (set it to 0) and see if it helps.

 

I will try running both off the Nvidia. I eventually want to add a 3rd monitor to the setup, so I figured I'd run those off the onboard video. I was concerned with the Catalyst software running one card and Nvidia software running the other. So far they seem to be playing nice. I did turn off the turbo settings for the onboard video.

[koadic]

Glad you got it working

[boiydiego]

is this table in need of a update to dx9 , because running this with vp9.20 gives me ball ghosting with lots of diffrend settings i tryed also on vp9.2.1 i have this problem and running with vp9.90a gives even more  problems , table plays good except for the (graphic problem ball ghosting/flickering) thinking it has something to do with the big ball that turns when that turns then flickering kicks in, are more people here with this problem ?is there a fix for this beautyful table?

Edited by boiydiego, 17 August 2014 - 03:42 PM.