Jump to content



Photo
* * * * * 2 votes

pinDMD-2 development :)


  • Please log in to reply
838 replies to this topic

#741 arngrim

arngrim

    DJ Force Feedback

  • VIP
  • 2,188 posts
  • Location:Charleroi, Belgium

  • Flag: Belgium

  • Favorite Pinball: Monster bash



Posted 12 March 2014 - 11:16 AM

it works for me



#742 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 12 March 2014 - 12:17 PM

Arcade4

 

Have you got another pc you can quickly setup just pinmame on and one of the dodgy roms then install pinDMD and see if your getting the same result.



#743 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 12 March 2014 - 04:15 PM

I already have my desktop PC setup with Visual Pinball.

So I would need to move that PC over to my cabinet and hook the PinDMD up to it?

Yes, that can be done, but of course it will take quite a bit of time later.

Don't get me wrong, I am happy to try anything to make this work, and I jokingly say "The PinDmd1 is starting to look better and better." lol



#744 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 12 March 2014 - 05:04 PM

While standing around at work today a crazy idea appeared to me.

Back in the old days when I first started doing visual pinball I used to unzip the roms.

After I found out that you were not supposed to unzip them I started leaving them zipped.

I wonder if the tables that are messing up on the PinDMd2 are my unzipped roms.

I have never had a problem with them in the past for any reason but maybe, just maybe this is the problem.

I will check it out after work and see if all the problems happen to be with unzipped roms.

 

 

***Edit*** That was a no go. It does not matter if the Rom is zipped or not. It still refuses to show up on the PinDmd2. Tried re-downloading some Roms just for fun anyway, but it did not help.


Edited by Arcade4, 12 March 2014 - 10:03 PM.


#745 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 12 March 2014 - 11:38 PM

Just tried the powered USB Hub. Same problem. :(

Going to see an Elton John concert tonight so I can't try changing out computers until tomorrow sometime.



#746 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 13 March 2014 - 09:01 PM

i just cant see it been a hardware problem, the pinDMD just receives dmd frames it does not no any thing about the rom or table, so wouldn't just not work with some.

does your version of the pinDMD have the working LED's? if so you can test it without need the actual dmd plugged in and you can just watch the LED flicker to see when it receives a frame.

 

I think best bet is to start with a clean setup up just pinMAME and some dodgy roms and get it working on another pc then figure out where its going wrong in the cab pc :)



#747 klodo81

klodo81

    Enthusiast

  • Platinum Supporter
  • 54 posts
  • Location:Albi, France

  • Flag: France

  • Favorite Pinball: I like them all for their art

Posted 13 March 2014 - 09:36 PM

Russ,

 

PinDMD 2 with screen DMD XPin low voltage work very well on my cabinet with Windows 8.1 (64) + Pinballx + BAM + Future Pinball

I dont change the firmware and I dont know which is it 

 

But in a first time I had the same problems I can read here :

- screen flashing

- when display is first turned on you see the world DMD cutoff about midway

- Words in a alien language or scrambled

- Text out off screen

 

When I anderstood the problem I solved it in one second:

- The problem was a bad connexion on the PinDMD card and its connector from DMD

- Because connector is bad quality, if just I touch the connector the screen flashing again

- I cross the finger that this problem don't destroy my PinDMD card or my DMD screen

 

Also if you have this problem first touch your connector on the PinDMD Card before install driver again

If the screen flash differently the connector is the problem

 

 

I hope this topic help somebody



#748 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 14 March 2014 - 12:34 AM

OK. Brought up my personal PC that is identical to my cabinet PC.

Installed the usb drivers for pinDMD2 and all tables run perfectly on the display.

Now I am confused as can be. What could have happened to my cabinet pc while installing the pin DMD2 software. All was working perfectly before with the pinDmd1.

I tried uninstalling the pinDMD2 and reinstalling it, but that did not work either.

This is the craziest thing I have seen happen to my cabinet ever.

 

Was there maybe something I was supposed to uninstall from the PinDMD1 first that would be causing trouble?

The only thing different in the two computers is that my cabinet PC was running PINDMD1.


Edited by Arcade4, 14 March 2014 - 12:52 AM.


#749 mjr

mjr

    Pinball Wizard

  • Members
  • PipPipPipPipPip
  • 3,346 posts

  • Flag: United States of America

  • Favorite Pinball: Medieval Madness

Posted 14 March 2014 - 05:40 AM

OK. Brought up my personal PC that is identical to my cabinet PC.

Installed the usb drivers for pinDMD2 and all tables run perfectly on the display.

Now I am confused as can be. What could have happened to my cabinet pc while installing the pin DMD2 software. All was working perfectly before with the pinDmd1.

I tried uninstalling the pinDMD2 and reinstalling it, but that did not work either.

This is the craziest thing I have seen happen to my cabinet ever.

 

Was there maybe something I was supposed to uninstall from the PinDMD1 first that would be causing trouble?

The only thing different in the two computers is that my cabinet PC was running PINDMD1.

 

I hate it when people chime into these tech trouble threads with random uninformed guesses, so I apologize for the random uninformed guess I'm about to make. :)  But...  doesn't PinMAME have a bunch of per-table registry data that includes things like display layout?  Maybe you have some registry entries for the affected tables that are interfering with the PinDMD2.  That might explain why two seemingly identical Windows machines would exhibit different behaviors - they might look the same but still differ in what's stored in their registries. 

 

It might be worth picking one of the affected tables and deleting its pinmame registry key.  It looks like the key for a table is HKEY_CURRENT_USER\Software\Freeware\Visual PinMame\xxx, where xxx is the ROM name.  (To do this, fire up regedit, navigate to the key, right-click it [i.e., right-click on the ROM name in the left panel], and click Delete. You'll probably want to export the key to a file for safekeeping before deleting it, in case the test fails and you want to restore the settings.  Be sure visual pinball isn't running when you do this, so that it doesn't have a copy of the old settings in memory when you delete the key.)


Edited by mjr, 14 March 2014 - 05:41 AM.


#750 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 14 March 2014 - 05:52 AM

Any ideas are welcome at this point mjr. Thanks for posting.

I will give it a try tomorrow after work.



#751 arngrim

arngrim

    DJ Force Feedback

  • VIP
  • 2,188 posts
  • Location:Charleroi, Belgium

  • Flag: Belgium

  • Favorite Pinball: Monster bash



Posted 14 March 2014 - 06:11 AM

Did you INSTALL the new dll from setup.exe?
Replacing it is not enough

#752 Swisslizard

Swisslizard

    DOF inventor & coder

  • VIP
  • 152 posts

  • Flag: Switzerland

  • Favorite Pinball: The Machine

Posted 14 March 2014 - 09:26 AM

I also had a lot of trouble with the pindmd2. Pinddmd1 worked great, but I never got pindmd2 to work.

Finnaly the only thing I found to solve the problem was to add a additional USB pci card to the computer in my cab. After that was installed, Pindmd2 started to work without any problems.

Programming is a race between software engineers striving to build  idiot-proof programs, and the universe trying to produce bigger idiots. So far, the universe is winning.


#753 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 14 March 2014 - 09:53 AM

pinDMD1 used a off the shelf ftdi usb coms chip which FTDI look after all the installation support so it is supported by EVERY THING and they will fix any bugs if it does not work and release new drivers etc (but this is an extra chip in the project)

 

pinDMD2 now uses the inbuilt STM microcontroller usb coms library/hardware which has no support lol. So if a certain motherboard does not like it your a bit screwed :(

 

If there was to be a pinDMD3 which there wont! but if there was i would go back to using FTDI just because of all the support that comes with it :)


Edited by russdx, 14 March 2014 - 09:53 AM.


#754 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 14 March 2014 - 05:59 PM

Did you INSTALL the new dll from setup.exe?
Replacing it is not enough

Yes. I have hit install on the new .dll

The powered USB port has no effect.

Reinstalling everything I can think of has had no effect.

The mother board and video card and cpu in the replacement computer are all the same as my cabinet PC, so I doubt that is the issue.

The only thing I have yet to try is deleting the registry entries for the broken tables.

I guess If I can't get it working soon there will be a PINDMD2 for sale in the future. :)


Edited by Arcade4, 14 March 2014 - 07:51 PM.


#755 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 15 March 2014 - 12:14 AM

mjr,

You sir, are a genius.

Deleting the registry entries for the bad table solved the entire problem.

I have no idea what got put in there on certain tables but it sure screwed up the PinDMD2 output.

Now I just have to get a list of the 40 or 50 tables that are giving me problems out of the 160 I have installed and delete that freaking registry.

Thanks a million for chiming in here with that marvelous suggestion.

Leon. 



#756 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 15 March 2014 - 11:12 AM

Glad you got it sorted but im sure i mentioned clearing the registry in one of my original replys :P :)

#757 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 15 March 2014 - 03:17 PM

After going back and rereading some of the suggestions I did manage to somehow overlook your registry comment.

Back when arngrim asked me if I had showDMD set to on, I thought he meant the little checkbox in the setup of the new Pinmame.dll. oops.

It was not until mjr gave the exact lines of where to find the bad registry files that everything finally clicked into place.

Everyone here, as usual was the best, and I appreciate all the help with this madness.

Still wondering how all those tables got messed up and why the PinDMD1 was not effected.


Edited by Arcade4, 15 March 2014 - 03:18 PM.


#758 arngrim

arngrim

    DJ Force Feedback

  • VIP
  • 2,188 posts
  • Location:Charleroi, Belgium

  • Flag: Belgium

  • Favorite Pinball: Monster bash



Posted 15 March 2014 - 05:59 PM

That new checkbox controls the showpindmd registry value in fact, that's weird, but if you have it working, that is the essential :)

#759 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 15 March 2014 - 06:14 PM

That new checkbox controls the showpindmd registry value in fact, that's weird, but if you have it working, that is the essential :)

If that is the case, then it does indeed make this puzzle even stranger.
I am going to test a theory out before I go deleting all the effected registry tables.
Maybe I clicked install pinmame before checking that little box.
I will go back and click install pinmame again, making sure that box is checked first. Long shot, but maybe that was the problem.
Now it is just a matter of my curious nature that wants to know what was causing the problem in the first place.

**Edit** hitting install after checking the box, had no effect. Still had to delete the registry for The Shadow.
Works great now though. :)

Edited by Arcade4, 15 March 2014 - 07:01 PM.


#760 EddCase

EddCase

    Hobbyist

  • Members
  • PipPip
  • 49 posts
  • Location:United Kingdom

  • Flag: United Kingdom

  • Favorite Pinball: Funhouse

Posted 18 August 2014 - 06:59 PM

Hi Guys, i'm in the planning phase of my table now the wife has given the nod for me to go ahead. I'd like to factor in the cost of the DMD and PinDMD2, but I noticed the availability is showing as sold out on the website. I also wanted to confirm I'm looking at the correct DMD I was looking at the Plasma http://uk.mouser.com...PxXm0QrO9pvTYk= seems it comes with the power supply or would you suggest I look at the cheaper http://uk.mouser.com...XrFQmD9xRWWBPE= ?
 
So ultimately my question is, is the PinDMD2 still available and at what price? and what's the consensus with regards to the DMD. Please bare in mind I'm in the UK so shipping and Import fees would apply outside of the EU. Thank you for your time.
 
Edd