Jump to content



Photo
* * * * * 2 votes

pinDMD-2 development :)


  • Please log in to reply
838 replies to this topic

#521 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 24 February 2013 - 11:41 PM

if you can find pinDMD in your device manager (under what ever windows has decided to assign it to) right click and uninstall it. then unplug and replug in and hopefully you will be able to go through the install process correctly :)


finished the custom settings firmware :) need to test it a bit more / get a few people to test to make sure its stable.
 
you will be able to set the intensity to what you want and the pinDMD2 will remember it. you can also set the refresh rate but this shouldn't really be needed.
 
[img]http://img818.imageshack.us/img818/559/settingsn.png[/img]
 
You will need to download the a new version of the firmware (ill release once tested properly) and then another little pinDMDsettings.exe(as seen above) I made it using an older .net framework so it should work fine on xp/vista/win7 (iv tested it on loads of pcs and it seams to work great)
 
once the new firmware is installed. run the pinDMDsettings.exe and it will read your current firmware settings. then you can change them to how you want the DMD to look. then press save to apply the settings to the pinDMD. you can just load the pinDMDsettings.exe at any time and swap the settings :) the pinDMD stores the new settings in flash so it will remember them even when it loses power.
Has this been updated? Anyone try it yet?

 

 

the latest firmware now supports this :) I have not heard of ant problems with it so far :)



#522 deadsoulz

deadsoulz

    Enthusiast

  • Platinum Supporter
  • 175 posts

  • Flag: United States of America

  • Favorite Pinball: Creature from the Black Lagoon

Posted 24 February 2013 - 11:46 PM

I give up for now either this thing is faulty or just quirky in XP, seems to not want to work quite right in windows 7 either, the driver installed, but won't function.   I am back to the PinDMD 1.  Works fine.


Edited by deadsoulz, 24 February 2013 - 11:54 PM.


#523 studmuff

studmuff

    Pinball Fan

  • Charter Member
  • 768 posts
  • Location:Wisconsin

  • Flag: United States of America

  • Favorite Pinball: Tron, ACDC, LOTR

Posted 25 February 2013 - 12:05 AM

if you can find pinDMD in your device manager (under what ever windows has decided to assign it to) right click and uninstall it. then unplug and replug in and hopefully you will be able to go through the install process correctly :)

finished the custom settings firmware :) need to test it a bit more / get a few people to test to make sure its stable.
 
you will be able to set the intensity to what you want and the pinDMD2 will remember it. you can also set the refresh rate but this shouldn't really be needed.
 
http://img818.images.../settingsn.png]
 
You will need to download the a new version of the firmware (ill release once tested properly) and then another little pinDMDsettings.exe(as seen above) I made it using an older .net framework so it should work fine on xp/vista/win7 (iv tested it on loads of pcs and it seams to work great)
 
once the new firmware is installed. run the pinDMDsettings.exe and it will read your current firmware settings. then you can change them to how you want the DMD to look. then press save to apply the settings to the pinDMD. you can just load the pinDMDsettings.exe at any time and swap the settings :) the pinDMD stores the new settings in flash so it will remember them even when it loses power.

Has this been updated? Anyone try it yet?
  the latest firmware now supports this :) I have not heard of ant problems with it so far :)

Stupid question: is the latest version rev584-16.dfu? Is this what I download? I have never updated the firmware for this before. :)

#524 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 25 February 2013 - 12:33 AM

follow this guide for firmware updating :)

http://www.pindmd.com/AN004.pdf

 

@deadsoulz

it should work great on xp as thats the os it was developed on.

what problems are you having with win7?

does the logo appear on your dmd? (good indication the board is alive)

does it show up as a pinDMD2 device in your device manager under libusb devices?

have you installed the correct (pindmd2) version on VpinMame.dll?

 

If you think its faulty send it back and ill test it :) (try all the above suggestions though as postage is costly :()


Edited by russdx, 25 February 2013 - 12:33 AM.


#525 studmuff

studmuff

    Pinball Fan

  • Charter Member
  • 768 posts
  • Location:Wisconsin

  • Flag: United States of America

  • Favorite Pinball: Tron, ACDC, LOTR

Posted 25 February 2013 - 02:03 AM

follow this guide for firmware updating :)
http://www.pindmd.com/AN004.pdf
 
Following guide.  Already downloaded usb drivers when I setup pinDMD2.
Ran Setup for drivers setDFU.exe.  When I go to step 3 I am lost. Sorry.
Tom.

Edited by studmuff, 25 February 2013 - 02:45 AM.


#526 Aurich

Aurich

    Enthusiast

  • Members
  • PipPipPip
  • 306 posts
  • Location:Southern California

  • Flag: ---------

  • Favorite Pinball: Scared Stiff

Posted 25 February 2013 - 03:55 AM

For what it's worth I updated my firmware following the instructions and successfully used the tool to adjust my brightness settings. Can you explain more about what you're stuck on?



#527 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 25 February 2013 - 10:26 AM

follow this guide for firmware updating :)
http://www.pindmd.com/AN004.pdf
 
Following guide.  Already downloaded usb drivers when I setup pinDMD2.
Ran Setup for drivers setDFU.exe.  When I go to step 3 I am lost. Sorry.
Tom.

 

so its not asking you to install a stm dfu usb driver? when you run the setDFU.exe (does your DMD go blank?)



#528 studmuff

studmuff

    Pinball Fan

  • Charter Member
  • 768 posts
  • Location:Wisconsin

  • Flag: United States of America

  • Favorite Pinball: Tron, ACDC, LOTR

Posted 25 February 2013 - 09:08 PM

follow this guide for firmware updating :)http://www.pindmd.com/AN004.pdf

 
Following guide.  Already downloaded usb drivers when I setup pinDMD2.
Ran Setup for drivers setDFU.exe.  When I go to step 3 I am lost. Sorry.
Tom.
 
so its not asking you to install a stm dfu usb driver? when you run the setDFU.exe (does your DMD go blank?)

Yes

No, I thought the drivers installed and hit choose.
I turned the machine off and the dmd was then fine but no update.

#529 vulbas

vulbas

    Enthusiast

  • Members
  • PipPipPip
  • 216 posts
  • Location:villebon sur yvette (essonne)

  • Flag: France

  • Favorite Pinball: medieval madness

Posted 26 February 2013 - 10:57 AM

hello,
I received new pinled 16x16.
it not work: (. I have to put what firmware pinled?
 
help me pplleeaasseee 
 


#530 vulbas

vulbas

    Enthusiast

  • Members
  • PipPipPip
  • 216 posts
  • Location:villebon sur yvette (essonne)

  • Flag: France

  • Favorite Pinball: medieval madness

Posted 26 February 2013 - 11:19 AM

 it is it works. do not buy pinled. this is not serious. alignment of the modules wrong. problem welding .....

 

 

Attached Files



#531 hotdp

hotdp

    Enthusiast

  • Members
  • PipPipPip
  • 434 posts

  • Flag: Denmark

  • Favorite Pinball: T2

Posted 26 February 2013 - 11:21 AM

 it is it works. do not buy pinled. this is not serious. alignment of the modules wrong. problem welding .....

 

You can easily align them. They are only in sockets.



#532 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 26 February 2013 - 11:35 AM

@vulbas, just out of interest what did you do to cause the crap image in the first video lol??, you just need the latest firmware '584' it includes all pinled fixes. 


Edited by russdx, 26 February 2013 - 11:36 AM.


#533 vulbas

vulbas

    Enthusiast

  • Members
  • PipPipPip
  • 216 posts
  • Location:villebon sur yvette (essonne)

  • Flag: France

  • Favorite Pinball: medieval madness

Posted 26 February 2013 - 12:00 PM

  connection with the ribbon which is not good. the fault pinled.
 
@ hotdp: this is not serious from pinled.
I align of course.
 
the news pinled 
 
and the old 
 


#534 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 26 February 2013 - 01:05 PM

it all working ok now? :)



#535 vulbas

vulbas

    Enthusiast

  • Members
  • PipPipPip
  • 216 posts
  • Location:villebon sur yvette (essonne)

  • Flag: France

  • Favorite Pinball: medieval madness

Posted 26 February 2013 - 01:25 PM

Ho yes verry good.
I am appy.

Thx russ

#536 arngrim

arngrim

    DJ Force Feedback

  • VIP
  • 2,188 posts
  • Location:Charleroi, Belgium

  • Flag: Belgium

  • Favorite Pinball: Monster bash



Posted 26 February 2013 - 01:47 PM

On a pas de bol nous les frenchie avec nos dmd, mais on y arrive toujours à la fin ;)

 

I didn't post a picture yet, here's what i had to do to fix my dancing pixel issue  :blink:

 

Attached File  2013-02-26 14.38.41.jpg   94.15KB   39 downloads

 

 



#537 jasonsmith

jasonsmith

    Enthusiast

  • Members
  • PipPipPip
  • 214 posts
  • Location:BC, Canada

  • Flag: Canada

  • Favorite Pinball: AFM

Posted 26 February 2013 - 03:57 PM

 it is it works. do not buy pinled. this is not serious. alignment of the modules wrong. problem welding .....

 

Ya you can see that the alignment is off but as stated above you may be able to just push them a little straighter. Might be harder than the 8x8 blocks because there should be more connections but you should try. I would actually de-solder them and re do it myself. 



#538 bosvrucht

bosvrucht

    Enthusiast

  • Members
  • PipPipPip
  • 410 posts

  • Flag: Netherlands

  • Favorite Pinball: LOTR

Posted 26 February 2013 - 04:05 PM

 it is it works. do not buy pinled. this is not serious. alignment of the modules wrong. problem welding .....

 

Ya you can see that the alignment is off but as stated above you may be able to just push them a little straighter. Might be harder than the 8x8 blocks because there should be more connections but you should try. I would actually de-solder them and re do it myself. 

as Hotdp pointed out: they are socketed, so no need for desoldering, or you can push them 99% straight, while still socketed (as Hotdp did, succesfullly)



#539 jasonsmith

jasonsmith

    Enthusiast

  • Members
  • PipPipPip
  • 214 posts
  • Location:BC, Canada

  • Flag: Canada

  • Favorite Pinball: AFM

Posted 26 February 2013 - 04:07 PM

That is actually awesome that they are socketed, how easy is that to replace a bad block, wow. I'm starting to really wish I got one of those 16x16 PinLED's. 



#540 studmuff

studmuff

    Pinball Fan

  • Charter Member
  • 768 posts
  • Location:Wisconsin

  • Flag: United States of America

  • Favorite Pinball: Tron, ACDC, LOTR

Posted 26 February 2013 - 06:46 PM

Any way to update with just a USB stick?