Jump to content



Photo
* * * * * 2 votes

pinDMD-2 development :)


  • Please log in to reply
838 replies to this topic

#501 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 13 February 2013 - 09:27 PM

ah ok cool so its not a show stopper then hehe, im not sure why this software upsets the pinDMD2 libusb or why pinDMD2 upsets this software :( ill try and do some research and see what its doing under the covers :)



#502 jasonsmith

jasonsmith

    Enthusiast

  • Members
  • PipPipPip
  • 214 posts
  • Location:BC, Canada

  • Flag: Canada

  • Favorite Pinball: AFM

Posted 13 February 2013 - 09:32 PM

strange. I have an Ipac and Pindmd 2 with no issues. I am running win xp

 

Not sure what will happen on XP as I'm on 7 but if you're feeling brave and don't mind your cab being down for a bit fire up WinIpac and try and program your board. It would be nice to know if this is also a xp issue. If you haven't installed WinIpac then simply installing it should make things go bonkers with your DMD. 



#503 The Loafer

The Loafer

    Pinball Wizard

  • VIP
  • 3,472 posts
  • Location:Embrun, Ontario, Canada

  • Flag: ---------

  • Favorite Pinball: Superman, Firepower & Tron



Posted 14 February 2013 - 04:29 AM

It's sucks but is no biggy if I need to reinstall the DMD driver after installing/using WinIPAC. It's not like we use WinIPAC all the time but the most important thing is to know about this issue so its not frustring to try and figure it out. Thanks jason!



#504 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 14 February 2013 - 12:14 PM

Current batch seams to be ok, only had one board mystically die so far :(. I am having another x100 batch made up now :) hopefully  the LED's get put on the correct way round this time lol (have made clear instructions on there correct orientation this time hehe). I think the assembler said they will be ready around 22nd of march but probably sooner :)

 

once this batch is sold that will be 335 pinDMD's in the wild :) 135xv1 and 200xv2 

 

i had no idea there was that many cab builders out there :)



#505 hotdp

hotdp

    Enthusiast

  • Members
  • PipPipPip
  • 434 posts

  • Flag: Denmark

  • Favorite Pinball: T2

Posted 14 February 2013 - 12:26 PM

Current batch seams to be ok, only had one board mystically die so far

 

Damn I was "lucky" :-)



#506 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 14 February 2013 - 12:37 PM

haha yeah that one LOL, its so weird its still half alive as in the processor is running and its running the firmware but the timing is totally out the main crystal signal is fecked it doesn't even try to do any usb coms. so weird. no idea what would turn it into a vegetable like that lol.

 

ah well 1/235 aint to bad i guess, i think noah mention another none working one but i need to do some tests on it make sure its not just blown gpio due to user errro or some thing simple like solder bridge or some thing.


Edited by russdx, 14 February 2013 - 12:38 PM.


#507 Zablon

Zablon

    Pinball Fan

  • Members
  • PipPipPipPip
  • 642 posts

  • Flag: United States of America

  • Favorite Pinball: Funhouse

Posted 14 February 2013 - 04:30 PM

It's an ever growing hobby, and is helping push the overhall pin emulation hobby forward. Just think Russ, your creation is in the forefront of pushing it in the direction it's going :) There are still many cabs out there w/o real DMD's. I have to think Vishay and other DMD manufacturers are scratching their heads at the sudden increase in demand.



#508 K3V

K3V

    Enthusiast

  • Members
  • PipPipPip
  • 55 posts

  • Flag: United States of America

  • Favorite Pinball: Addams Family

  • PS3 Gamer Tag: K3V_TNL
  • 360 Gamer Tag: K3V2

Posted 15 February 2013 - 06:08 PM

Current batch seams to be ok, only had one board mystically die so far :(. I am having another x100 batch made up now :) hopefully  the LED's get put on the correct way round this time lol (have made clear instructions on there correct orientation this time hehe). I think the assembler said they will be ready around 22nd of march but probably sooner :)

 

Yay - just put a preorder down on a red Vishay from virtuapin.net, will need one of these to go with it! Hopefully I'm in on the next batch :)



#509 antropus

antropus

    Enthusiast

  • Platinum Supporter
  • 229 posts
  • Location:Bay Area

  • Flag: United States of America

  • Favorite Pinball: Monster Bash

Posted 16 February 2013 - 01:53 AM

Hi all, I'm in touch with Zebulon about this, but since I don't want to bother him too much by sending lots of PMs and knowing how busy he is with his own projects, I decided to ask around here so whoever knows about it and feels like helping, that would be great!

I started my build not long ago: http://www.vpforums....showtopic=22621

As you can see, my intention is to go ahead and try using my plasma DMD and I will need some help hooking up all the power sources, since my skills on the electrical side are very, very basic. I know, the LED version would be a MUCH simpler solution, but here I am trying to run a plasma just because I'm a dreamer :)

I'm looking for a solution similar to this one by PinKitty: http://www.hyperspin...ll=1#post188480

I already ordered the step down transformers to get the 100v and 80v from my 120v source and will get the ground, 12v and 5v from the PC PSU. I already got the pinDMD2 driver board and my DMD is a Vishay APD-128G032.
I'm planning to order the Stern Display Power Supply Board ( http://www.pinballli...=product&id=565 ) to power the DMD, but I will need help hooking up everything.

Zebulon mentioned the need I'll have to fuse the AC line going into the transformers, to avoid damaging things if something goes wrong, but even here I wouldn't know what fuse I should buy so the current doesn't end burning down my DMD anyway :)

My question is: would someone be kind enough to draw a very basic, little schematics showing how this system would look like? Something that a newbie like me could understand? :)

Basically a system involving:

1 Vishay Plasma DMD
1 120v > 100v step-down transformer
1 120v > 80v step-down transformer
1 Computer PSU
1 pinDMD2
1 Stern Display Power Supply Board

Any help will be GREATLY appreciated!
Thanks!!!
-Kris

Btw, I found this link explaining how to revert a LED DMD back to Plasma by using the same power board (4.7.1 DMD LED to Plasma conversion): http://www.pinwiki.c...asma_conversion

and this one talks about the voltages: http://www.pinwiki.c...ay_Power_Supply

#510 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 16 February 2013 - 08:58 AM

PC -> (USB cable) -> pinDMD2 -> (14way ribbon cable) -> DMD

 

im pretty sure one side of that plasma driver board just plugs directly into the plasma power display it self using a little power hardness.

you then need to feed the imput with the 12v, 80v and 100v with there grounds.

 

some thing like that :)



#511 arngrim

arngrim

    DJ Force Feedback

  • VIP
  • 2,188 posts
  • Location:Charleroi, Belgium

  • Flag: Belgium

  • Favorite Pinball: Monster bash



Posted 17 February 2013 - 06:42 PM

I have finally fixed the issue of my pindmd2 in combination to my vishay led!

 

For recall, the left side of the image was crappy:

 

 

But it was fine with the pindmd1  :hmm:

 

Russell, as suggested we tried to put a cap between the dot clock pin and the main ground, and the display bug was worse.

 

So, after some investigation, it's when i touch the second and the third pin together that the interferences were gone.

 

Just by putting a 10 pf cap between these two pin and the image is now perfect!

 

Weird isn't it? But it works


Edited by arngrim, 17 February 2013 - 06:43 PM.


#512 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 17 February 2013 - 06:52 PM

weiiiiirddd lol, that's the dot clock and dot data pins, i would of thought tying to ground would work best. but if this works go with it :)

 

id love to know the source of the interference, but short of coming to your house with my oscilloscope it will remain a mystery lol

 

glad u got it sorted :)


Edited by russdx, 17 February 2013 - 06:58 PM.


#513 arngrim

arngrim

    DJ Force Feedback

  • VIP
  • 2,188 posts
  • Location:Charleroi, Belgium

  • Flag: Belgium

  • Favorite Pinball: Monster bash



Posted 17 February 2013 - 07:25 PM

you are welcome whenever you want to try :D

 

Thanks for your great support ;)



#514 lurch

lurch

    Hobbyist

  • Members
  • PipPip
  • 35 posts
  • Location:KY

  • Flag: United States of America

  • Favorite Pinball: adams family

Posted 23 February 2013 - 02:49 AM

Just put a deposit on virtuapin for a 5v led DMD and singed up on your site that I was interested in a pindmd2; is that all I need to doin order to be on a list somewhere? Also wanted to ask, was looking for a bit but couldn't find an exact answer, will this control board need to have software on the pc running the graphics or does the DMD become ROM controlled through the custom dll in pin mame? You are doing amazing work, I can't wait to replace my 15" monitor for a DMD.

#515 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 23 February 2013 - 11:37 AM

getting on the list is cool :) this time round where will be quite alot of re-sellers selling the board so will be plenty of places to buy it from if you don't make my direct from me preOrder list.

 

all the pinDMD does is receive DMD frames over USB and then display them on the real DMD, to control it you need a pc, you can control it from VpinMame.dll (using a custom pinDMD version which includes all the pinDMD control code) or you can control it from FuturePinball now as well using another drop in .dll. 

 

so basically install the pinDMD USB drivers

install the new VpinMame.dll

and your good to go, all your vp DMD tables will appear on the real DMD :)

 

complete install guide here

http://www.pindmd.co...allGuide-v2.pdf



#516 lurch

lurch

    Hobbyist

  • Members
  • PipPip
  • 35 posts
  • Location:KY

  • Flag: United States of America

  • Favorite Pinball: adams family

Posted 23 February 2013 - 03:47 PM

all the pinDMD does is receive DMD frames over USB and then display them on the real DMD, to control it you need a pc, you can control it from VpinMame.dll (using a custom pinDMD version which includes all the pinDMD control code) or you can control it from FuturePinball now as well using another drop in .dll. 

 

so basically install the pinDMD USB drivers

install the new VpinMame.dll

and your good to go, all your vp DMD tables will appear on the real DMD :)

 

complete install guide here

http://www.pindmd.co...allGuide-v2.pdf

 

 

brilliant.

 

Can't wait - got my fingers crossed for the list and if not i'll keep my eyes peeled for the re-sellers

 

cheers!



#517 deadsoulz

deadsoulz

    Enthusiast

  • Platinum Supporter
  • 175 posts

  • Flag: United States of America

  • Favorite Pinball: Creature from the Black Lagoon

Posted 24 February 2013 - 09:35 PM

I am having trouble installing the pindmd2 driver.  I had the pindmd1, removed the hardware, plugged in the pindmd2, it shows up as unknown device in windowsXP.   I try installing the driver, and it won't take it, says its not for this hardware....   Any ideas?



#518 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 24 February 2013 - 09:39 PM

Deffo installing the new libusb driver?

From pindmd.com v2 downloads

#519 deadsoulz

deadsoulz

    Enthusiast

  • Platinum Supporter
  • 175 posts

  • Flag: United States of America

  • Favorite Pinball: Creature from the Black Lagoon

Posted 24 February 2013 - 09:41 PM

Deffo installing the new libusb driver?

From pindmd.com v2 downloads

Yes, I downloaded it 3 times to make sure.    It won't take the inf file.   It works fine on my Windows 7 box, just not my cabinet.   I couldn't follow the install instructions to a T because it didn't pop up an install wizard when I plugged it in, it just automatically assigned it unknown device.    Would running installer_x86.exe first be what broke it?


Edited by deadsoulz, 24 February 2013 - 10:39 PM.


#520 studmuff

studmuff

    Pinball Fan

  • Charter Member
  • 768 posts
  • Location:Wisconsin

  • Flag: United States of America

  • Favorite Pinball: Tron, ACDC, LOTR

Posted 24 February 2013 - 11:39 PM

finished the custom settings firmware :) need to test it a bit more / get a few people to test to make sure its stable.
 
you will be able to set the intensity to what you want and the pinDMD2 will remember it. you can also set the refresh rate but this shouldn't really be needed.
 
[img]http://img818.imageshack.us/img818/559/settingsn.png[/img]
 
You will need to download the a new version of the firmware (ill release once tested properly) and then another little pinDMDsettings.exe(as seen above) I made it using an older .net framework so it should work fine on xp/vista/win7 (iv tested it on loads of pcs and it seams to work great)
 
once the new firmware is installed. run the pinDMDsettings.exe and it will read your current firmware settings. then you can change them to how you want the DMD to look. then press save to apply the settings to the pinDMD. you can just load the pinDMDsettings.exe at any time and swap the settings :) the pinDMD stores the new settings in flash so it will remember them even when it loses power.

Has this been updated? Anyone try it yet?