490 replies to this topic

[yogibogi]

hi
i have some weird light on my left side strip. i didnt change anything in my combo on dof config and also for the cabinet file
only update the config file.
this is my cabinet file

<?xml version="1.0"?> <Cabinet xmlns:xsi="http://www.w3.org/20...chema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Name>TimoPin</Name> <OutputControllers> <TeensyStripController> <Name>LEDStripController</Name> <NumberOfLedsStrip1>144</NumberOfLedsStrip1> <NumberOfLedsStrip2>144</NumberOfLedsStrip2> <NumberOfLedsStrip3>448</NumberOfLedsStrip3> <NumberOfLedsStrip4>0</NumberOfLedsStrip4> <NumberOfLedsStrip5>0</NumberOfLedsStrip5> <NumberOfLedsStrip6>0</NumberOfLedsStrip6> <NumberOfLedsStrip7>0</NumberOfLedsStrip7> <NumberOfLedsStrip8>0</NumberOfLedsStrip8> <ComPortName>COM3</ComPortName> </TeensyStripController> </OutputControllers> <Toys> <LedStrip> <Name>PF Back</Name> <Width>56</Width> <Height>8</Height> <LedStripArrangement>TopDownAlternateLeftRight</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>289</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>LEDStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>PF Right</Name> <Width>1</Width> <Height>144</Height> <LedStripArrangement>TopDownRightLeft</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>145</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>LEDStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>PF Left</Name> <Width>1</Width> <Height>144</Height> <LedStripArrangement>TopDownRightLeft</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>1</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>LEDStripController</OutputControllerName> </LedStrip> <LedWizEquivalent> <Name>LedWizEquivalent 30</Name> <Outputs> <LedWizEquivalentOutput> <OutputName>PF Back</OutputName> <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> <LedWizEquivalentOutput> <OutputName>PF Right</OutputName> <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> <LedWizEquivalentOutput> <OutputName>PF Left</OutputName> <LedWizEquivalentOutputNumber>7</LedWizEquivalentOutputNumber> </LedWizEquivalentOutput> </Outputs> <LedWizNumber>30</LedWizNumber> </LedWizEquivalent> </Toys> <AutoConfigEnabled>true</AutoConfigEnabled> </Cabinet>


you can see the problem in this video
https://youtu.be/hn-HJHaf22I

thanks

Sent from my GM1900 using Tapatalk

Edited by yogibogi, 24 October 2020 - 06:52 PM.

[ilkay]

Hi

Link broken

http://mjrnet.org/pi...ll-updates.html

 

( DOF R3++ )

Can anyone share the latest version?

 

Thank you

[Outhere]

Hi

Link broken

http://mjrnet.org/pi...ll-updates.html

 

( DOF R3++ )

Can anyone share the latest version?

 

Thank you

What's broke

[wiesshund]

site loads for me aslo

[lukpcn]

Can someone take a peek at my problem with DOF and b2s ? pulling my hair out

https://www.vpforums...889#entry497402

[drady]

Silly question time. I got a combo to work, namely the right sling solenoid and the knocker.

Is there a way to also fire the beacon at the same time. That combo doesnt seem selectable.

[Energetics79]

dear guys i tried to do setup as described, but i cannot get my cabinet buttons to light up.

 

using a zebsboard pinscape basic...in test all lamps can be turned on

then going to port assingments in dof conf...using ledwiz 1 as in the descrpition www.zebsboards.ca/public_html/support_docs/Pinscape_Basic.pdf

 

then i use the latest r3 installer and copy to tables plugin..ok in backglass..copying from examples to config...though cabinet is empty (?)

 

and now i am stuck...no button lights...heeeeelp plz

 

DirectOutput Version 3.1.7776.42172, built 2021.04.16 23:25

MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy

DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput

2022.05.28 11:48:32.680 DirectOutput Logger initialized

2022.05.28 11:48:32.667 Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"

2022.05.28 11:48:32.680 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml

2022.05.28 11:48:32.680 Loading Pinball parts

2022.05.28 11:48:32.681 Loading cabinet

2022.05.28 11:48:32.681 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml

2022.05.28 11:48:32.720 0 output controller defnitions and 0 toy definitions loaded from cabinet config.

2022.05.28 11:48:32.720 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.

2022.05.28 11:48:32.720 Cabinet auto configuration started

2022.05.28 11:48:32.805 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)

2022.05.28 11:48:32.816 LedWiz-like device at VID=4815, PID=537, product string=Tt eSPORTS Level 10 M mouse, manufacturer string=DEXIN

2022.05.28 11:48:32.817 LedWiz-like device at VID=4815, PID=537, product string=Tt eSPORTS Level 10 M mouse, manufacturer string=DEXIN

2022.05.28 11:48:32.819 LedWiz-like device at VID=1133, PID=49702, product string=G15 Gaming Keyboard, manufacturer string=<not available>

2022.05.28 11:48:32.820 LedWiz-like device at VID=1133, PID=49702, product string=G15 Gaming Keyboard, manufacturer string=<not available>

2022.05.28 11:48:32.821 LedWiz-like device at VID=5218, PID=31861, product string=MYSTIC LIGHT , manufacturer string=MSI

2022.05.28 11:48:32.821 LedWiz-like device at VID=8352, PID=240, product string=Pinscape Controller, manufacturer string=mjrnet

2022.05.28 11:48:32.822 LedWiz-like device at VID=1133, PID=49703, product string=G15 GamePanel LCD, manufacturer string=<not available>

2022.05.28 11:48:32.822 LedWiz-like device at VID=8352, PID=240, product string=Pinscape Controller, manufacturer string=mjrnet

2022.05.28 11:48:32.829 Cabinet auto configuration finished

2022.05.28 11:48:32.829 Autoconfig complete.

2022.05.28 11:48:32.829 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml

2022.05.28 11:48:32.829 Cabinet loaded

2022.05.28 11:48:32.829 Loading table config

2022.05.28 11:48:32.829 Warning: No table config file found. Will try to load config from LedControl file(s).

2022.05.28 11:48:32.829 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName afm_113b

2022.05.28 11:48:32.831 Loading LedControl file C:\DIRECTOUTPUT\directoutputconfig.ini

2022.05.28 11:48:32.833 Min DOF Version is 0.8 for file directoutputconfig.ini

2022.05.28 11:48:32.833 Resolving Tables Variables

2022.05.28 11:48:32.834 Resolving Global Variables

2022.05.28 11:48:32.930 1 directoutputconfig.ini or ledcontrol.ini files loaded.

2022.05.28 11:48:32.931 Config for RomName afm_113b exists in LedControl data. Updating cabinet and config.

2022.05.28 11:48:32.937 Table config loading finished: romname=afm_113b, tablename=Attack from Mars LE 3.04

2022.05.28 11:48:32.937 Pinball parts loaded

2022.05.28 11:48:32.938 Starting processes

2022.05.28 11:48:32.938 Initializing cabinet

2022.05.28 11:48:32.938 Debug: Initializing output controllers

2022.05.28 11:48:32.938 Debug: Output controllers initialized

2022.05.28 11:48:32.938 Cabinet initialized

2022.05.28 11:48:32.940 Loading shape definition file: C:\DIRECTOUTPUT\DirectOutputShapes.xml

2022.05.28 11:48:32.980 Framework initialized.

2022.05.28 11:48:32.980 Have fun!

2022.05.28 11:50:38.785 Finishing framework

2022.05.28 11:50:38.786 Finishing cabinet

2022.05.28 11:50:38.786 Debug: Finishing output controllers

2022.05.28 11:50:38.786 Debug: Output controllers finished

2022.05.28 11:50:38.786 Cabinet finished

2022.05.28 11:50:38.786 DirectOutput framework finished.

2022.05.28 11:50:38.786 Bye and thanks for using!

Edited by Energetics79, 28 May 2022 - 10:12 AM.

[mjr]

Energetics79 - it looks to me like DOF isn't recognizing any devices.  I see this:

 

2022.05.28 11:48:32.822 LedWiz-like device at VID=8352, PID=240, product string=Pinscape Controller, manufacturer string=mjrnet

 

I think that's the issue - it looks like the device is identifying itself as a Zebsboard product by its USB vendor ID (VID 8352 = 20A0 hex), but the manufacturer string is set to "mjrnet".  DOF will recognize 20A0 + "zebsboard" as an LedWiz emulator, but it doesn't know this particular combination.  You might try going into the Pinscape Config Tool and changing the device's USB ID to use the Pinscape codes instead - DOF should see it right away if you do that.

You might also contact zebsboards about it - I'm sure he's tested this with DOF, so he might have some other special thing you have to do instead.

[zebulon]

Yeah, the latest commit broke compatibility with my numbers across all of my boards.  If you change to the default Pinscape or LEDWiz numbers it will work fine.

[Energetics79]

Yes thank you that did the trick.. Can you maybe direct me on how to get the lights running from startup instead only when the table has loaded? thankyou

[Outhere]

Add something like this to the DOF Program
https://www.vpforums...topic=51084&hl=

Edited by Outhere, 19 March 2023 - 09:37 PM.