34 replies to this topic

[Outhere]

When testing do outside the front end
Post a picture of your Config folder

[Cadorna]

I did it, please check the links on my previous post to my Onedrive folder . I can't post images directly on the forum, no idea why.

[wiesshund]

. I can't post images directly on the forum, no idea why.

 

 

 

 

 

 

Edited by wiesshund, 12 May 2021 - 05:22 AM.

[Outhere]

I did it, please check the links on my previous post to my Onedrive folder . I can't post images directly on the forum, no idea why.

Okay I see the picture now
The files you have in your config folder do not have any duplicates in your directoutput folder
-
In your config folder try running with just these files and the Examples folder

 

Examples
GlobalConfig_B2SServer.xml
cabinet.xml
directoutputconfig.ini
directoutputconfig30.ini
directoutputconfig51.ini
DirectOutputShapes.png
DirectOutputShapes.xml
tablemappings.xml
DirectOutputTesterSettings.xml

[Cadorna]

 

. I can't post images directly on the forum, no idea why.

 

 

 

 

 

 

 

Thanks a lot man...it was driving me crazy!

[Cadorna]

 

I did it, please check the links on my previous post to my Onedrive folder . I can't post images directly on the forum, no idea why.

Okay I see the picture now
The files you have in your config folder do not have any duplicates in your directoutput folder
-
In your config folder try running with just these files and the Examples folder

 

Examples
GlobalConfig_B2SServer.xml
cabinet.xml
directoutputconfig.ini
directoutputconfig30.ini
directoutputconfig51.ini
DirectOutputShapes.png
DirectOutputShapes.xml
tablemappings.xml
DirectOutputTesterSettings.xml

 

Done, here is the image:

 

 

Executed VP and load "Total Nuclear Annihilation (Spooky 2017)" table and play a little. After that, a log file was created at: .\Visual Pinball\Tables folder, this is the content:

 

---------------------------------------------------------------------------------

DirectOutput Version 3.1.7776.42172, built 2021.04.16 23:25

MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy

DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput

2021.05.12 12:15:18.482 DirectOutput Logger initialized

2021.05.12 12:15:18.460 Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"

2021.05.12 12:15:18.482 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml

2021.05.12 12:15:18.482 Loading Pinball parts

2021.05.12 12:15:18.482 Loading cabinet

2021.05.12 12:15:18.483 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml

2021.05.12 12:15:18.832 1 output controller defnitions and 4 toy definitions loaded from cabinet config.

2021.05.12 12:15:18.832 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.

2021.05.12 12:15:18.833 Cabinet auto configuration started

2021.05.12 12:15:18.915 Detected and added Pinscape Controller Nr. 1 with name Pinscape Controller 01

2021.05.12 12:15:18.915 Added LedwizEquivalent Nr. 51 with name Pinscape Controller 01 Equivalent for Pinscape Controller Nr. 1, 12

2021.05.12 12:15:18.920 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)

2021.05.12 12:15:18.926 LedWiz-like device at VID=64250, PID=240, product string=USB LEDwiz, manufacturer string=ROF

2021.05.12 12:15:18.926 HID caps: usage page=65280, usage=1, number of link collection nodes=1, output report byte length=9

2021.05.12 12:15:18.928 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 12:15:18.929 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 12:15:18.931 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 12:15:18.932 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 12:15:18.932 LedWiz-like device at VID=64250, PID=247, product string=Pinscape Controller, manufacturer string=mjrnet

2021.05.12 12:15:18.932 HID caps: usage page=1, usage=4, number of link collection nodes=1, output report byte length=9

2021.05.12 12:15:18.933 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 12:15:18.934 LedWiz-like device at VID=64250, PID=247, product string=Pinscape Controller, manufacturer string=mjrnet

2021.05.12 12:15:18.934 HID caps: usage page=12, usage=1, number of link collection nodes=1, output report byte length=0

2021.05.12 12:15:18.935 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 12:15:18.937 Opening 32-bit LedWiz driver...

2021.05.12 12:15:18.938 Detected and added LedWiz Nr. 1 with name LedWiz 01

2021.05.12 12:15:18.938 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1

2021.05.12 12:15:18.938 Opening 32-bit LedWiz driver...

2021.05.12 12:15:18.938 Detected and added LedWiz Nr. 8 with name LedWiz 08

2021.05.12 12:15:18.938 Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8

2021.05.12 12:15:18.940 Cabinet auto configuration finished

2021.05.12 12:15:18.940 Autoconfig complete.

2021.05.12 12:15:18.940 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml

2021.05.12 12:15:18.940 Cabinet loaded

2021.05.12 12:15:18.940 Loading table config

2021.05.12 12:15:18.941 Warning: No table config file found. Will try to load config from LedControl file(s).

2021.05.12 12:15:18.941 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName tna

2021.05.12 12:15:18.943 Loading LedControl file C:\Games\Visual Pinball\Tables\directoutputconfig.ini

2021.05.12 12:15:18.946 Min DOF Version is 0.8 for file directoutputconfig.ini

2021.05.12 12:15:18.946 Resolving Tables Variables

2021.05.12 12:15:18.947 Resolving Global Variables

2021.05.12 12:15:19.112 Loading LedControl file C:\Games\Visual Pinball\Tables\directoutputconfig51.ini

2021.05.12 12:15:19.113 Min DOF Version is 0.8 for file directoutputconfig51.ini

2021.05.12 12:15:19.113 Resolving Tables Variables

2021.05.12 12:15:19.113 Resolving Global Variables

2021.05.12 12:15:19.211 2 directoutputconfig.ini or ledcontrol.ini files loaded.

2021.05.12 12:15:19.213 Config for RomName tna exists in LedControl data. Updating cabinet and config.

2021.05.12 12:15:19.231 Table config loading finished: romname=tna, tablename=Total Nuclear Annihilation (Spooky 2017)

2021.05.12 12:15:19.232 Pinball parts loaded

2021.05.12 12:15:19.232 Starting processes

2021.05.12 12:15:19.232 Initializing cabinet

2021.05.12 12:15:19.232 Debug: Initializing output controllers

2021.05.12 12:15:19.244 TeensyStripController LEDStripController intialized and updater thread started.

2021.05.12 12:15:19.244 Pinscape Pinscape Controller 01 intialized and updater thread started.

2021.05.12 12:15:19.244 Debug: Initializing LedWiz Nr. 01

2021.05.12 12:15:19.245 TeensyStripController LEDStripController updater thread  started.

2021.05.12 12:15:19.245 Pinscape Pinscape Controller 01 updater thread  started.

2021.05.12 12:15:19.245 Pinscape Pinscape Controller 01 updater thread  has connected to Pinscape Pinscape Controller 01.

2021.05.12 12:15:19.246 LedWiz Nr. 01 initialized and updater thread initialized.

2021.05.12 12:15:19.246 Debug: Initializing LedWiz Nr. 08

2021.05.12 12:15:19.246 Initializing ComPort COM4 with these settings :

2021.05.12 12:15:19.246 BaudRate 9600, Parity None, DataBits 8, StopBits One, R/W Timeouts 200ms

2021.05.12 12:15:19.246 Handshake Timings : Open 50ms, Loop Start/End 20/50ms, DTR enable False

2021.05.12 12:15:19.246 Updater thread for LedWiz 01 started.

2021.05.12 12:15:19.246 LedWiz Nr. 08 initialized and updater thread initialized.

2021.05.12 12:15:19.246 Debug: Output controllers initialized

2021.05.12 12:15:19.246 Updater thread for LedWiz 08 started.

2021.05.12 12:15:19.250 Cabinet initialized

2021.05.12 12:15:19.253 Loading shape definition file: C:\DIRECTOUTPUT\config\DirectOutputShapes.xml

2021.05.12 12:15:19.287 Framework initialized.

2021.05.12 12:15:19.287 Have fun!

2021.05.12 12:15:19.350 TeensyStripController LEDStripController updater thread  has connected to TeensyStripController LEDStripController.

2021.05.12 12:16:29.881 Finishing framework

2021.05.12 12:16:29.882 Finishing cabinet

2021.05.12 12:16:29.883 Debug: Finishing output controllers

2021.05.12 12:16:29.899 TeensyStripController LEDStripController updater thread  has disconnected from TeensyStripController LEDStripController and will terminate.

2021.05.12 12:16:29.899 TeensyStripController LEDStripController finished and updater thread stopped.

2021.05.12 12:16:29.901 Pinscape Pinscape Controller 01 updater thread  has disconnected from Pinscape Pinscape Controller 01 and will terminate.

2021.05.12 12:16:29.901 Pinscape Pinscape Controller 01 finished and updater thread stopped.

2021.05.12 12:16:29.902 Debug: Finishing LedWiz Nr. 01

2021.05.12 12:16:29.902 Updater thread for LedWiz 01 terminated.

2021.05.12 12:16:29.915 LedWiz Nr. 01 finished and updater thread stopped.

2021.05.12 12:16:29.915 Debug: Finishing LedWiz Nr. 08

2021.05.12 12:16:29.915 Updater thread for LedWiz 08 terminated.

2021.05.12 12:16:29.928 LedWiz Nr. 08 finished and updater thread stopped.

2021.05.12 12:16:29.928 Debug: Output controllers finished

2021.05.12 12:16:29.928 Cabinet finished

2021.05.12 12:16:29.928 DirectOutput framework finished.

2021.05.12 12:16:29.928 Bye and thanks for using!

2021.05.12 12:16:38.683 Debug: Disposing LedWiz instance 08.

2021.05.12 12:16:38.684 Debug: Disposing LedWiz instance 01.

[Outhere]

Did the addressable LEDs work?

It should create a log in the directoutput folder

[Cadorna]

No, it did not. There is no log created into the directoutput folder and LOG section seems to be correctly configured. If I left the file called "GlobalConfig_PinballY.xml" in config folder again, PinballY illuminate the led strips with some effcts when I move between tables so I can assume that there is communication between DOF and Teensy so maybe is there some kind a problem with my VP or tables config ?

Edited by Cadorna, 12 May 2021 - 05:31 PM.

[Outhere]

You have something setup wrong in your setup
What is that other directoutput folder?

Try re-Register in this folder C:\DirectOutput    RegisterDirectOutputComObject.exe  

This to file are the same?

GlobalConfig_B2SServer.xml

GlobalConfig_PinballY.xml

[Cadorna]

The other directoutput flder called C:\DIrectoutput.ori is a copy of the original that I keep there just in case.

And the folder called "DOF Config Autoupdater" store a batch file that download the DOF web site config every time that PC start to keep updated with the changes on tables... nothing happend there, I tested moving it to other location and still the led strips doesn't work.

 

 

I reinstalled DOF from the last .MSI package found on the MJR site.

 

After that, copied the Cabinet.xml file that was previously edited and launched the program called "GlobalConfigEditor.exe" with right click and "Run As administer" option, load de Cabinet.xml file and start the process of the several "Save as ...", as I watched on a video, to create the files "GlobalConfig.xml", "GlobalConfig_B2Sserver.xml" and "GlobalConfig_PinballY.xml."

 

After that, started the program "RegisterDirectOutputComObject.exe" with a right click and "Run As administer" and then I did click on the "OK" button, that's all.

 

And I restarted the PC several times, of course.

Edited by Cadorna, 12 May 2021 - 06:13 PM.

[Cadorna]

JIC, I removed the folder, generate and download the file directoutputconfig.zip and extract the files (again) manually. Run VP and load the same table (leds strip did not worked), quit and only one .log file was generated into C.\Games\visual pinball\tables, here it is:

 

---------------------------------------------------------------------------------

DirectOutput Version 3.1.7776.42172, built 2021.04.16 23:25

MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy

DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput

2021.05.12 15:18:54.752 DirectOutput Logger initialized

2021.05.12 15:18:54.737 Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"

2021.05.12 15:18:54.752 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml

2021.05.12 15:18:54.752 Loading Pinball parts

2021.05.12 15:18:54.752 Loading cabinet

2021.05.12 15:18:54.753 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml

2021.05.12 15:18:54.953 1 output controller defnitions and 4 toy definitions loaded from cabinet config.

2021.05.12 15:18:54.953 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.

2021.05.12 15:18:54.954 Cabinet auto configuration started

2021.05.12 15:18:55.040 Detected and added Pinscape Controller Nr. 1 with name Pinscape Controller 01

2021.05.12 15:18:55.040 Added LedwizEquivalent Nr. 51 with name Pinscape Controller 01 Equivalent for Pinscape Controller Nr. 1, 12

2021.05.12 15:18:55.045 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)

2021.05.12 15:18:55.051 LedWiz-like device at VID=64250, PID=240, product string=USB LEDwiz, manufacturer string=ROF

2021.05.12 15:18:55.051 HID caps: usage page=65280, usage=1, number of link collection nodes=1, output report byte length=9

2021.05.12 15:18:55.053 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 15:18:55.054 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 15:18:55.055 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 15:18:55.056 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 15:18:55.057 LedWiz-like device at VID=64250, PID=247, product string=Pinscape Controller, manufacturer string=mjrnet

2021.05.12 15:18:55.057 HID caps: usage page=1, usage=4, number of link collection nodes=1, output report byte length=9

2021.05.12 15:18:55.058 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 15:18:55.059 LedWiz-like device at VID=64250, PID=247, product string=Pinscape Controller, manufacturer string=mjrnet

2021.05.12 15:18:55.059 HID caps: usage page=12, usage=1, number of link collection nodes=1, output report byte length=0

2021.05.12 15:18:55.060 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech

2021.05.12 15:18:55.063 Opening 32-bit LedWiz driver...

2021.05.12 15:18:55.064 Detected and added LedWiz Nr. 1 with name LedWiz 01

2021.05.12 15:18:55.064 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1

2021.05.12 15:18:55.064 Opening 32-bit LedWiz driver...

2021.05.12 15:18:55.064 Detected and added LedWiz Nr. 8 with name LedWiz 08

2021.05.12 15:18:55.064 Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8

2021.05.12 15:18:55.066 Cabinet auto configuration finished

2021.05.12 15:18:55.066 Autoconfig complete.

2021.05.12 15:18:55.066 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml

2021.05.12 15:18:55.066 Cabinet loaded

2021.05.12 15:18:55.066 Loading table config

2021.05.12 15:18:55.067 Warning: No table config file found. Will try to load config from LedControl file(s).

2021.05.12 15:18:55.067 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName tna

2021.05.12 15:18:55.070 Loading LedControl file C:\Games\Visual Pinball\Tables\directoutputconfig.ini

2021.05.12 15:18:55.073 Min DOF Version is 0.8 for file directoutputconfig.ini

2021.05.12 15:18:55.073 Resolving Tables Variables

2021.05.12 15:18:55.074 Resolving Global Variables

2021.05.12 15:18:55.243 Loading LedControl file C:\Games\Visual Pinball\Tables\directoutputconfig51.ini

2021.05.12 15:18:55.243 Min DOF Version is 0.8 for file directoutputconfig51.ini

2021.05.12 15:18:55.243 Resolving Tables Variables

2021.05.12 15:18:55.244 Resolving Global Variables

2021.05.12 15:18:55.345 2 directoutputconfig.ini or ledcontrol.ini files loaded.

2021.05.12 15:18:55.346 Config for RomName tna exists in LedControl data. Updating cabinet and config.

2021.05.12 15:18:55.364 Table config loading finished: romname=tna, tablename=Total Nuclear Annihilation (Spooky 2017)

2021.05.12 15:18:55.365 Pinball parts loaded

2021.05.12 15:18:55.365 Starting processes

2021.05.12 15:18:55.365 Initializing cabinet

2021.05.12 15:18:55.365 Debug: Initializing output controllers

2021.05.12 15:18:55.378 TeensyStripController LEDStripController intialized and updater thread started.

2021.05.12 15:18:55.379 Pinscape Pinscape Controller 01 intialized and updater thread started.

2021.05.12 15:18:55.379 TeensyStripController LEDStripController updater thread  started.

2021.05.12 15:18:55.379 Pinscape Pinscape Controller 01 updater thread  started.

2021.05.12 15:18:55.379 Debug: Initializing LedWiz Nr. 01

2021.05.12 15:18:55.379 Pinscape Pinscape Controller 01 updater thread  has connected to Pinscape Pinscape Controller 01.

2021.05.12 15:18:55.381 Initializing ComPort COM4 with these settings :

2021.05.12 15:18:55.381 BaudRate 9600, Parity None, DataBits 8, StopBits One, R/W Timeouts 200ms

2021.05.12 15:18:55.381 Handshake Timings : Open 50ms, Loop Start/End 20/50ms, DTR enable False

2021.05.12 15:18:55.381 LedWiz Nr. 01 initialized and updater thread initialized.

2021.05.12 15:18:55.381 Debug: Initializing LedWiz Nr. 08

2021.05.12 15:18:55.381 Updater thread for LedWiz 01 started.

2021.05.12 15:18:55.381 Updater thread for LedWiz 08 started.

2021.05.12 15:18:55.382 LedWiz Nr. 08 initialized and updater thread initialized.

2021.05.12 15:18:55.382 Debug: Output controllers initialized

2021.05.12 15:18:55.386 Cabinet initialized

2021.05.12 15:18:55.390 Loading shape definition file: C:\DIRECTOUTPUT\config\DirectOutputShapes.xml

2021.05.12 15:18:55.445 Framework initialized.

2021.05.12 15:18:55.445 Have fun!

2021.05.12 15:18:55.489 TeensyStripController LEDStripController updater thread  has connected to TeensyStripController LEDStripController.

2021.05.12 15:19:17.564 Finishing framework

2021.05.12 15:19:17.568 Finishing cabinet

2021.05.12 15:19:17.569 Debug: Finishing output controllers

2021.05.12 15:19:17.585 TeensyStripController LEDStripController updater thread  has disconnected from TeensyStripController LEDStripController and will terminate.

2021.05.12 15:19:17.585 TeensyStripController LEDStripController finished and updater thread stopped.

2021.05.12 15:19:17.587 Pinscape Pinscape Controller 01 updater thread  has disconnected from Pinscape Pinscape Controller 01 and will terminate.

2021.05.12 15:19:17.588 Pinscape Pinscape Controller 01 finished and updater thread stopped.

2021.05.12 15:19:17.588 Debug: Finishing LedWiz Nr. 01

2021.05.12 15:19:17.588 Updater thread for LedWiz 01 terminated.

2021.05.12 15:19:17.602 LedWiz Nr. 01 finished and updater thread stopped.

2021.05.12 15:19:17.602 Debug: Finishing LedWiz Nr. 08

2021.05.12 15:19:17.602 Updater thread for LedWiz 08 terminated.

2021.05.12 15:19:17.615 LedWiz Nr. 08 finished and updater thread stopped.

2021.05.12 15:19:17.615 Debug: Output controllers finished

2021.05.12 15:19:17.615 Cabinet finished

2021.05.12 15:19:17.615 DirectOutput framework finished.

2021.05.12 15:19:17.615 Bye and thanks for using!

2021.05.12 15:19:22.835 Debug: Disposing LedWiz instance 08.

2021.05.12 15:19:22.836 Debug: Disposing LedWiz instance 01.

[Cadorna]

Is it normal that "Show cabinet configuration" on B2S Server > Plugins settings ... doesn't open and hang up ? Could someone do the same and give me your feedback ?

See the following video at link please: https://www.loom.com...22db9216c1b7236

[Outhere]

In your GlobalConfig_B2SServer.xml  try changing this line -- <IniFilesPath />

to  

<IniFilesPath>C:\DirectOutput\Config</IniFilesPath>

It's getting files from the wrong place
 

2021.05.12 15:18:55.063 Opening 32-bit LedWiz driver...

2021.05.12 15:18:55.064 Detected and added LedWiz Nr. 1 with name LedWiz 01

2021.05.12 15:18:55.064 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1

2021.05.12 15:18:55.064 Opening 32-bit LedWiz driver...

2021.05.12 15:18:55.064 Detected and added LedWiz Nr. 8 with name LedWiz 08

2021.05.12 15:18:55.064 Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8

2021.05.12 15:18:55.066 Cabinet auto configuration finished

2021.05.12 15:18:55.066 Autoconfig complete.

2021.05.12 15:18:55.066 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml

2021.05.12 15:18:55.066 Cabinet loaded

2021.05.12 15:18:55.066 Loading table config

2021.05.12 15:18:55.067 Warning: No table config file found. Will try to load config from LedControl file(s).

2021.05.12 15:18:55.067 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName tna

2021.05.12 15:18:55.070 Loading LedControl file C:\Games\Visual Pinball\Tables\directoutputconfig.ini

2021.05.12 15:18:55.073 Min DOF Version is 0.8 for file directoutputconfig.ini

2021.05.12 15:18:55.073 Resolving Tables Variables

2021.05.12 15:18:55.074 Resolving Global Variables

2021.05.12 15:18:55.243 Loading LedControl file C:\Games\Visual Pinball\Tables\directoutputconfig51.ini

2021.05.12 15:18:55.243 Min DOF Version is 0.8 for file directoutputconfig51.ini

2021.05.12 15:18:55.243 Resolving Tables Variables

2021.05.12 15:18:55.244 Resolving Global Variables

2021.05.12 15:18:55.345 2 directoutputconfig.ini or ledcontrol.ini files loaded.

2021.05.12 15:18:55.346 Config for RomName tna exists in LedControl data. Updating cabinet and config.

2021.05.12 15:18:55.364 Table config loading finished: romname=tna, tablename=Total Nuclear Annihilation (Spooky 2017)

Edited by Outhere, 12 May 2021 - 10:33 PM.

[Cadorna]

 

In your GlobalConfig_B2SServer.xml  try changing this line -- <IniFilesPath />

to  

<IniFilesPath>C:\DirectOutput\Config</IniFilesPath>

It's getting files from the wrong place
 

2021.05.12 15:18:55.063 Opening 32-bit LedWiz driver...

2021.05.12 15:18:55.064 Detected and added LedWiz Nr. 1 with name LedWiz 01

2021.05.12 15:18:55.064 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1

2021.05.12 15:18:55.064 Opening 32-bit LedWiz driver...

2021.05.12 15:18:55.064 Detected and added LedWiz Nr. 8 with name LedWiz 08

2021.05.12 15:18:55.064 Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8

2021.05.12 15:18:55.066 Cabinet auto configuration finished

2021.05.12 15:18:55.066 Autoconfig complete.

2021.05.12 15:18:55.066 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml

2021.05.12 15:18:55.066 Cabinet loaded

2021.05.12 15:18:55.066 Loading table config

2021.05.12 15:18:55.067 Warning: No table config file found. Will try to load config from LedControl file(s).

2021.05.12 15:18:55.067 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName tna

2021.05.12 15:18:55.070 Loading LedControl file C:\Games\Visual Pinball\Tables\directoutputconfig.ini

2021.05.12 15:18:55.073 Min DOF Version is 0.8 for file directoutputconfig.ini

2021.05.12 15:18:55.073 Resolving Tables Variables

2021.05.12 15:18:55.074 Resolving Global Variables

2021.05.12 15:18:55.243 Loading LedControl file C:\Games\Visual Pinball\Tables\directoutputconfig51.ini

2021.05.12 15:18:55.243 Min DOF Version is 0.8 for file directoutputconfig51.ini

2021.05.12 15:18:55.243 Resolving Tables Variables

2021.05.12 15:18:55.244 Resolving Global Variables

2021.05.12 15:18:55.345 2 directoutputconfig.ini or ledcontrol.ini files loaded.

2021.05.12 15:18:55.346 Config for RomName tna exists in LedControl data. Updating cabinet and config.

2021.05.12 15:18:55.364 Table config loading finished: romname=tna, tablename=Total Nuclear Annihilation (Spooky 2017)

 

That did the trick dude ... Thanks!

[sax]

In your GlobalConfig_B2SServer.xml  try changing this line -- <IniFilesPath />

to  

<IniFilesPath>C:\DirectOutput\Config</IniFilesPath>

 

 

 

This tip save me too. Thank you.