28 replies to this topic

[BlackPredator72]

I just downloaded a new version of the dB2s and wanted to test it but this table crashes with the latest Vpinball (9.2.0 r724).

When I put back the original VPinball 9.1.5 the table still works.

Edited by BlackPredator72, 18 November 2013 - 02:43 PM.

[koadic]

I just downloaded a new version of the dB2s and wanted to test it but this table crashes with the latest Vpinball (9.2.0 r724).
When I put back the original VPinball 9.1.5 the table still works.

Can you try to see what revision this starts happening on? This will help narrow down the cause of the issue. Click on the 'All Daily Builds' link in my sig, then go into the 'Older' folder to get previous 'beta' builds. If you find that the last revision that works has a sizable gap until the next number, I can try to compile the inbetween builds for you to test as well.

[fuzzel]

The issue came in with the new plunger and clipping changes. A workaround for this table is: click on the plunger and move it only bit up and save the table. The backdrop settings are very weird on this one because the plunger nearly falls off the table

[BlackPredator72]

 

I just downloaded a new version of the dB2s and wanted to test it but this table crashes with the latest Vpinball (9.2.0 r724).
When I put back the original VPinball 9.1.5 the table still works.

Can you try to see what revision this starts happening on? This will help narrow down the cause of the issue. Click on the 'All Daily Builds' link in my sig, then go into the 'Older' folder to get previous 'beta' builds. If you find that the last revision that works has a sizable gap until the next number, I can try to compile the inbetween builds for you to test as well.
 

 
It started with the latest build, VPinball 9.2 rev724
I tried some older ones but the problem starts with this one.

Edited by BlackPredator72, 18 November 2013 - 07:35 PM.

[koadic]

Did you try this?

The issue came in with the new plunger and clipping changes. A workaround for this table is: click on the plunger and move it only bit up and save the table. The backdrop settings are very weird on this one because the plunger nearly falls off the table

[BlackPredator72]

Yes indeed the workaround for this table works.
Is the problem solved ? I don't know ? Maybe there are more tables now with this problem...

[fuzzel]

yes with rev725!

[RYSr]

Thanks to all the feedback on this thread

 

I rem'ed out the offending lines as shown and the ( doesn't support property... error) went away

 

But for the extra distortion box, changing the x-scale to 2.19 didn't work, but when I also changed the y scale to 2 it went away and the table still fills the screen.

[bpjacobsen]

getting the attached error. using B2S, not UVP. the suggestion earlier in the thread (DLE) did not work for me.

Attached Files

•  ss error.png   9.8KB   2 downloads