77 replies to this topic

[Outhere]

http://www.vpforums....484#entry330625

http://www.vpforums....484#entry329926

[pkoslow]

Never mind, if you have th same issue please use the My F.S settings thumbnail above.. problem solved. now to take it for a test drive, looks good..

[RogerRoger]

I've been steadily tweaking this table for Desktop to get a feel I like, and have finally settled in on the following changes:

 

• Formatting- Inclination: 56, FoV: 34
• Global- Table Slope: 6.6, Pf Friction: 0.56, Pf Elasticity: 0.21
• TAFPF- Elasticity: 0.21, Friction: 0.55
• Main Flippers- Mass: 1.2, Strength: 2550, Elasticity 0.8, Elasticity Falloff: 0.35, Friction: 0.4, Return Strength: 0.055, Coil Ramp Up: 1

TAFPF object apparently is a raised playfield, so just right click anywhere in the middle of the table to find it. Thing Flips isn't hitting the mark, but I believe this is because I am sharing a single VPinMame installation between VP 10 and VP 9, so the old nvram data doesn't match up.

The above changes have me satisfied with speed, flow and accuracy.

Edited by RogerRoger, 24 May 2016 - 07:27 AM.

[DreamTrap]

My F.S settings

where do you add them options? i don't see anything like that in table slope or table options?

[sliderpoint]

Click Backdrop.

[skpManiac]

My F.S settings

How do I find these mate, I can only see a few of those options in my Table options - Thank you

Update - found them in BACKGLASS options through another post

 

Greta table  - Thanks

Edited by skpManiac, 12 June 2016 - 04:48 PM.

[CJS]

My F.S settings

 

thank you, spent a good half hour trying to find out how to display this in cabinet mode and your settings work a treat, table looks fantastic.

[daans]

Great table and one of my favourites, i only have one problem, only with this table (have 30 vpx tables now).
The location of the dmd does not stay in one place. When i move it or edit in registry the dmd location is off the next time i start it. Its only the pos_x (horizontal) location thats not remembered. The y pos is good.

Someone any ideas?

The other vpx games copy the pos from default value in registry.

[jinxy]

Great table and one of my favourites, i only have one problem, only with this table (have 30 vpx tables now).
The location of the dmd does not stay in one place. When i move it or edit in registry the dmd location is off the next time i start it. Its only the pos_x (horizontal) location thats not remembered. The y pos is good.

Someone any ideas?

The other vpx games copy the pos from default value in registry.

Are you using Set Dmd? Try setting direct Draw check box ,see this post for more info if you cant get it set http://www.vpforums....=31982&p=313955

[monza]

Check that the DMD position isn't hardcoded in the table script....

Edited by monza, 02 August 2016 - 05:19 AM.

[daans]

Not used set dmd. I will look in the code if it is hardcoded. Thanks for the answers.

I have +- 50 tables and three of them have weird dmd issues. Keep you guys posted

[monza]

Look for anything like the below; just comment it out if needed

 

        '.Games(cGameName).Settings.Value("dmd_pos_x")=2173

        '.Games(cGameName).Settings.Value("dmd_pos_y")=590

        '.Games(cGameName).Settings.Value("dmd_width")=518

        '.Games(cGameName).Settings.Value("dmd_height")=134

[DJRobX]

I did not have problems with the DMD position on this table, so I don't believe it's hardcoded.  

 

Remember that VPinMame will pick up the position for the game specific registry entry.  It will only copy the defaults the first time the game is opened.  I suggest going into the registry and removing the registry entry for Addams Family.     You can find it here.

 

HKEY_CURRENT_USER\Software\Freeware\Visual PinMame\taf_l1 

 

Just delete that whole key and try again. 

[sliderpoint]

There is no positioning in the script for the DMD.

 

It should actually be TAF_L7 in the registry.

 

Can you run the setup for vpinmame and test that rom outside of VP.  Move it where you want and then try VP again?

 

Lastly re-download the latest Vpinmame.dll and overwrite your existing one.

 

-Mike

[daans]

It's good now!

I've deleted the registry entry en started the game again, now it's good.

I really thought i did this obvious option, but i guess i'm a idiot for not trying.

 

Thanks a lot, going to go further 'bug out' my freshly installation

[AtomicKnight]

When I try to start the table, I get this as a script error"

 

Set bsTrough = New cvpmTrough

 

Whats the solution?

[gtxjoe]

You need to Update your vbs scipts to support the newer tables

[xenonph]

And here is where you can find the scripts.

Download this VPX Standalone..

http://www.vpforums....&showfile=11572

 

You will find a scripts folder included with download.

Here are the instructions..

Installation:
Simply copy all of the files in the ZIP into your already existing Visual Pinball directory. Overwrite already existing files there when asked. If you already had the core.vbs script package in your 'Tables' sub-directory previously, either delete these, or move all files contained in the 'Scripts' sub-directory to 'Tables'.

Edited by xenonph, 23 January 2017 - 02:56 AM.

[delt31]

tried the FS settings in this thread and get error 94:  Object doesn't support this properly or method: Table 1. Inclination FS"

 

wtf

[blackvulcan3]

Like delt31 I am also getting the Inclination error but mine is line 160. This is the only table I am getting this on and I am on 10.3 beta 3088.

 

Any thoughts on this??