43 replies to this topic

[zebulon]

You are correct sir, not sure what I was thinking of at the time (guess I need to proofread my posts...lol)

 

The ledwiz is good for 500ma per output to a maximum of 2.5 watts per chip.

 

The shaker draws slightly more than one amp at startup so it's well over that limit either way.

[Tom1965]

Thanks Zeb, just when i start getting my credit cards down you come up with something else I want.

[zebulon]

LOL...you should see how high mine get when I'm developing this stuff...

[zebulon]

For those who expressed an interest.....

 

 Whitby-20130104-00593.jpg   137.61KB   116 downloads  Whitby-20130104-00595.jpg   85.42KB   122 downloads  Whitby-20130104-00594.jpg   74.47KB   80 downloads

 

Crappy pics I know,but I'll upload some better ones once I  rout the edge and apply the finish. I'm thinking textured black with clear.

 

5 x 3watt Leds with heatsinks and 1 1/4" flasher caps, pre-wired

 

Black textured finish

 

Assembled 26 1/2" overall length (can be custom cut and drilled) 

 

$60 plus shipping ($50 without flasher caps)

Edited by zebulon, 04 January 2013 - 10:05 PM.

[hotdp]

For those who expressed an interest.....

 

Whitby-20130104-00593.jpgWhitby-20130104-00595.jpgWhitby-20130104-00594.jpg

 

Crappy pics I know,but I'll upload some better ones once I  rout the edge and apply the finish. I'm thinking textured black with clear.

 

5 x 3watt Leds with heatsinks and 1 1/4" flasher caps, pre-wired

 

Black textured finish

 

Assembled 26 1/2" overall length (can be custom cut and drilled) 

 

$60 plus shipping ($50 without flasher caps)

 

Take my money! :-)

How much is shipping to Denmark?

I was thinking about having it on top of the backbox, how long will the wires be? (Must people have them down with the playfield, maybe that better?)

[Slydog43]

Looking very nice.  I'm waiting on my cree stuff to do the same, cant wait.

[nocarrier]

You dont happen to be doing any in the 9w rgb?

[zebulon]

I can do it but I'd have to order them in. I can do the bar up and you can mount the leds if you like.

[zebulon]

Update on the shaker/gear assemblies......here's how they're looking... Still have to wire them

 

 Whitby-20130107-00597.jpg   108.04KB   81 downloads  Whitby-20130107-00598.jpg   123.57KB   101 downloads

 

Wired up  and ready to ship with the speed control installed....

 

 Whitby-20130107-00600.jpg   91.38KB   102 downloads  Whitby-20130107-00601.jpg   127.2KB   92 downloads

Edited by zebulon, 07 January 2013 - 09:14 PM.

[zebulon]

Update on the LEDbar...3watt RGBs...

 

 

 

 

 

[hotdp]

Wow, the LED bar looks awesome!

[Shakenbake]

Will you have a package with your board, shaker/gear and led setup?

[zebulon]

Everything is already priced at a bare minimum (if you knew how little I actually made off this you'd wonder why I do it...I know I do sometimes...)

 

That being said, it is cheaper for those in N. America to order as a package when it comes to shipping (the post office really gouges on the led bars due to their length).

[Shakenbake]

I ment it as more of a convience thing not a price issue. I own an electronics company and know exactly how little you are making on small batch custom orders. I just think it would be awesome to be able to paypal someone for a turn key forced feedback package. IE. booster board, ledwiz, shaker, gear, nocker, contactors, led bar ect.. Seems like you have most of that avail or in the works anyway. It would be worth it to some of us to save the time in research, shopping and seperate shipping to pay someone a little extra for their efforts.

[zebulon]

I get what you're saying, I just don't necessarily see the logic in paying the extra on the shipping for the ledwiz (winds up being $60.00 shipped to me, waits in customs only to be turned back around at extra shipping cost to wait in customs crossing into the States again....)

 

The balance of it....working on it....

[Shakenbake]

Didn't think about the customs thing. I guess everything but the ledwiz would still be an awesome package. Thanks for all you hard work in further developing this great hobby.

[zeenon]

You know for as many tables as I've played in the last week since I finished my cab, I have not heard the gear motor. I certainly have heard the shaker . Is there a good table to test this out on? Or better yet, is their a test routine on one of the tables to test it?

Z

Update: I loaded up Red & Ted and Funhouse and fired off the test routines and in all cases (dozer, Ted, red, etc) the shaker fires. How do I test the gear now?

Edited by zeenon, 26 June 2013 - 04:08 AM.

[MTPPC]

You should get a gear motor on the medieval madness draw bridge opening.

[randr]

You know for as many tables as I've played in the last week since I finished my cab, I have not heard the gear motor. I certainly have heard the shaker . Is there a good table to test this out on? Or better yet, is their a test routine on one of the tables to test it?

Z

Update: I loaded up Red & Ted and Funhouse and fired off the test routines and in all cases (dozer, Ted, red, etc) the shaker fires. How do I test the gear now?

load up Cyclone VP91.X FS 2.0 table! that gear motor will run the whole time the ferris wheel spins! and its a great table!

[zebulon]

On red and ted you should hear the gear motor everytime the mouths move