after my trip to the post office that will be all pinDMD2's posted!!!!!!!!!!!!!!
time for big nap
then wake up and help people who cant get them working ![]()
Posted 13 January 2013 - 11:22 PM
after my trip to the post office that will be all pinDMD2's posted!!!!!!!!!!!!!!
time for big nap
then wake up and help people who cant get them working ![]()
Current: NBA Fastbreak, Hook, Stranger Things (Pro)
Gone: Bram Stoker's Dracula, Revenge From Mars, Lethal Weapon 3, Medieval Madness (Remake), Mary Shelley's Frankenstein, Earthshaker, Big Buck Hunter Pro
pinDMD3 Now Available!
Videos of pinDMD in action | www.pinDMD.com
Posted 14 January 2013 - 05:14 PM
yeah send me the pinDMD2 (cheaper less / hassle) ill test it here and see if i can get the same problem your seeing ![]()
if i cant get it to do it here it must be some thing with your setup hehe, but we will see ![]()
pm me for my address
(or if you still have the packaging its on there
)
Current: NBA Fastbreak, Hook, Stranger Things (Pro)
Gone: Bram Stoker's Dracula, Revenge From Mars, Lethal Weapon 3, Medieval Madness (Remake), Mary Shelley's Frankenstein, Earthshaker, Big Buck Hunter Pro
pinDMD3 Now Available!
Videos of pinDMD in action | www.pinDMD.com
Posted 14 January 2013 - 08:59 PM
Just recieved my board ![]()
But it is buggy ![]()
The left part of my dmd screen is behaving oddly, pixels are moving, it is very bad...
I tried another usb cable, the ribbon of my pindmd1, usb 2.0 input of my pc, i even tried an another pc and the issue is the same.
I have this in game, but also on the pindmd logo...
Here are some pics
20130114_201816.jpg 42.59KB
72 downloads
20130114_201959.jpg 76.88KB
84 downloads
20130114_202003.jpg 70.48KB
65 downloads
When I hook up the pindmd1 again, it works flawlessly
I have a vishay LEE-128G032-1Orange
Do I need to update the firmware Russdx?
Edited by arngrim, 14 January 2013 - 09:07 PM.

Posted 14 January 2013 - 09:05 PM
Just recieved my board![]()
But it is buggy
The left part of my dmd screen is behaving oddly, pixels are moving, it is very bad...
I tried another usb cable, the ribbon of my pindmd1, usb 2.0 input of my pc, i even tried an another pc and the issue is the same.
I have this in game, but also on the pindmd logo...
Here are some pics
Am I the only one who can not see any pics?
Posted 14 January 2013 - 09:52 PM
Pics have been inserted few minutes after.
I Tried to upgrade, same issue...
20130114_224937.jpg 71.87KB
49 downloads
Help Russdx

Posted 14 January 2013 - 11:13 PM
Posted 14 January 2013 - 11:50 PM
arngrim this is very strange as pinDMD2 was tested with a LEE-128G032-1 DMD a number of times. I cant think what could be causing it to behave like that on your display.
I send you another firmware tomorrow with much lower refresh rates (maybe this display is very sensitive to the refresh rate?) I think i will order my own LEE-128G032-1 DMD as well (i was borrowing the test one) see if i can replicate this issue.
hopefully a few more people will be receiving there boards soon and we can see if they have similar issues. every thing is configurable in the firmware so its just a matter of getting the signals right to suite your DMD (should be correct by default!!!)
the issue wont be with the .dll but in the firmware. really strange though as it worked great with the LEE-128G032-1 i was testing with.
dont worry about it to much looks like a firmware thing (very strange though). ill order a LEE-128G032-1 tomorrow and see if i can replicate the problem my self. ill also make quick test firmware with much lower refresh rates (pinDMD1 has lower refresh rates due to only having 4shades, pinDMD2 has higher ones to get more shades)
be interesting to see if other people have similar issues
could you also try rev001-16.dfu,rev009-16.dfu quickly see if they make any difference
http://www.pindmd.co...ds-v2/firmware/
Current: NBA Fastbreak, Hook, Stranger Things (Pro)
Gone: Bram Stoker's Dracula, Revenge From Mars, Lethal Weapon 3, Medieval Madness (Remake), Mary Shelley's Frankenstein, Earthshaker, Big Buck Hunter Pro
pinDMD3 Now Available!
Videos of pinDMD in action | www.pinDMD.com
Posted 15 January 2013 - 12:07 AM
ok just ordered a LEE-128G032-1 ($537 ouch lol) ill see if i can replicate whats goin on ![]()
gonna get a virtuapin vishay matrix DMD as well. then i can have LEE-128G032-1, LEE-128G032B and pinLED all running at the same time for comparisons / testing lol be over a grands worth of DMD's lol
dont worry about it, i dont think its the board as they where all tested before sending out, either the DMD is very sensitive to the firmware or i have accidently changed some thing in recent versions that has upset that display. it can all be fixed ![]()
Current: NBA Fastbreak, Hook, Stranger Things (Pro)
Gone: Bram Stoker's Dracula, Revenge From Mars, Lethal Weapon 3, Medieval Madness (Remake), Mary Shelley's Frankenstein, Earthshaker, Big Buck Hunter Pro
pinDMD3 Now Available!
Videos of pinDMD in action | www.pinDMD.com
Posted 15 January 2013 - 12:36 AM
Got my PinDMD2 today just tested it out and working on LEE-128G032-1 straight out the er Jiffy Bag! Great work Russ.
Very quick play of Medieval Madness the table that troubled me originally with my PinDMD1 but looking good and wow not just orange but orange with shades of orange!
Jay
Posted 15 January 2013 - 01:18 AM
thanks for the update jay
i was getting a little stressed some thing might of been very wrong with the firmware lol.
ok looks like when the LEE-128G032-1 turns up it will most likely be fine for me as well. so need to figure out why its not working quite right for arngrim. thinking back the only time i have seen that effect was when i had grounding problems or the display timing was way out. i cant see how either of these cases could be effecting arngrim though.
arngrim what psu are you using for the DMD? for a quick test could you try powering the DMD off the same pc psu that drives the pinDMD? (be very careful to tap 5v not 12v!!!)
Current: NBA Fastbreak, Hook, Stranger Things (Pro)
Gone: Bram Stoker's Dracula, Revenge From Mars, Lethal Weapon 3, Medieval Madness (Remake), Mary Shelley's Frankenstein, Earthshaker, Big Buck Hunter Pro
pinDMD3 Now Available!
Videos of pinDMD in action | www.pinDMD.com
Posted 15 January 2013 - 02:22 AM
Edited by arngrim, 15 January 2013 - 07:48 AM.

Posted 15 January 2013 - 05:06 AM
I bought an LEE-128G032B from Virtua Pin and was wondering if that potential power problem effects this board at all or is it only the pinLED (like in the directions). Just a bit confused cause the way things have been talked about here make it seem like you should never have the pinDMD powered without a display no matter which DMD you are using. Did I read this correctly?
For some reason the ad wizards over at Asrock thought it would be a great idea to make all my usb slots on my motherboard retain power after shutdown with NO option to turn it off. I have a 5v power supply running the DMD and the pinDMD will be connected to the PC. Both devices are controlled with a smart power strip with the PC in the control slot. I have noticed before that there is a slight delay from when the PC is powered on and the other components in the slave outlets turn on. The reverse is true when I shut the system down. That is the power supplies, speakers, etc shut off then the PC turns off. Its like a millisecond, but the delay is there.
Luckily once the smart strip detects the PC is off there is no power draw from any devices, even the USB slots on the PC but i do here the LEDwiz "clear" the contractors one last time once the machine is completely off ( maybe power draining from the booster boards?). So is there any potential problems powering the pinDMD and my Vishey this way? I've been patiently waiting for these things since September and the last thing I want to do is fry the pinDMD on its maiden voyage
. Thanks !
Posted 15 January 2013 - 08:08 AM
I bought an LEE-128G032B from Virtua Pin and was wondering if that potential power problem effects this board at all or is it only the pinLED (like in the directions). Just a bit confused cause the way things have been talked about here make it seem like you should never have the pinDMD powered without a display no matter which DMD you are using. Did I read this correctly?
For some reason the ad wizards over at Asrock thought it would be a great idea to make all my usb slots on my motherboard retain power after shutdown with NO option to turn it off. I have a 5v power supply running the DMD and the pinDMD will be connected to the PC. Both devices are controlled with a smart power strip with the PC in the control slot. I have noticed before that there is a slight delay from when the PC is powered on and the other components in the slave outlets turn on. The reverse is true when I shut the system down. That is the power supplies, speakers, etc shut off then the PC turns off. Its like a millisecond, but the delay is there.
Luckily once the smart strip detects the PC is off there is no power draw from any devices, even the USB slots on the PC but i do here the LEDwiz "clear" the contractors one last time once the machine is completely off ( maybe power draining from the booster boards?). So is there any potential problems powering the pinDMD and my Vishey this way? I've been patiently waiting for these things since September and the last thing I want to do is fry the pinDMD on its maiden voyage
. Thanks !
With your vishay, it will not be a problem. It is really for Pinled users only. ON the subject of USB power: I had the same problem of not being able to turn off usb power, and am currently using a USB 2.0 pci card for the PinDMD (power to PCI slots always cuts off when the pc powers down)
@Russel and Hotdp: yeah, price sounds good. For me at mouser price inc. taxes/shipping would be 708 dollars for that display.
Edited by bosvrucht, 15 January 2013 - 08:13 AM.
Posted 15 January 2013 - 08:39 AM
i looked at mouser and it was very expensive. future electronics added on the vat when i paid so i assume customs wont try and add vat again!!! lol
ArcadiusMaximus - that issue is just pinLED its not a fault with the pinDMD but some thing wrong with the pinLED where it tries to draw current out through the io when unconnected
arngrim - from every thing you have done it must be a board fault, send it back and ill test it again my self ![]()
Current: NBA Fastbreak, Hook, Stranger Things (Pro)
Gone: Bram Stoker's Dracula, Revenge From Mars, Lethal Weapon 3, Medieval Madness (Remake), Mary Shelley's Frankenstein, Earthshaker, Big Buck Hunter Pro
pinDMD3 Now Available!
Videos of pinDMD in action | www.pinDMD.com
Posted 15 January 2013 - 08:44 AM
future electronics added on the vat when i paid so i assume customs wont try and add vat again!!! lol
Don't worry, I have talked to there sales person for weeks. If you are from UK you are safe and they will pay vat/customs for you.
But if you are from etc. Denmark. They will ship directly to you from USA and therefor you have to pay everything you self. The price for me ended up being $568,99 + shipping! Its a big joke. UK is very close to Denmark and are both part of EU. But thats the way Future electronics work :-S