447 replies to this topic

[Outhere]

Super fun table!! Thanks JP. Does anyone else have absolutely no feedback (directoutput) most other tables it works fine its this and the space cadet one too. Thanks in advanced!

Have you downloaded new files from the DOF website lately

[emgroom]

Super fun table!! Thanks JP. Does anyone else have absolutely no feedback (directoutput) most other tables it works fine its this and the space cadet one too. Thanks in advanced!

Have you downloaded new files from the DOF website lately

I'm sorry. I didn't elaborate further. I'm very new to dof and the whole vpin thing. I'm not sure where to look and what exactly to look for updated dof. I purchased the solenoid kit from Cleveland software and he included files which I installed. Thats as far as I've gotten.

[Outhere]

 

 

Super fun table!! Thanks JP. Does anyone else have absolutely no feedback (directoutput) most other tables it works fine its this and the space cadet one too. Thanks in advanced!

Have you downloaded new files from the DOF website lately

I'm sorry. I didn't elaborate further. I'm very new to dof and the whole vpin thing. I'm not sure where to look and what exactly to look for updated dof. I purchased the solenoid kit from Cleveland software and he included files which I installed. Thats as far as I've gotten.

 

You have to go to this website
Sign up then sign in and you need to put what type of hardware you are using and then download the zip file and unzip it into the Config Folder ( This is where the file usually go)
DirectOutput\Config
 

[emgroom]

Super fun table!! Thanks JP. Does anyone else have absolutely no feedback (directoutput) most other tables it works fine its this and the space cadet one too. Thanks in advanced!

Have you downloaded new files from the DOF website lately

I'm sorry. I didn't elaborate further. I'm very new to dof and the whole vpin thing. I'm not sure where to look and what exactly to look for updated dof. I purchased the solenoid kit from Cleveland software and he included files which I installed. Thats as far as I've gotten.

You have to go to this website
Sign up then sign in and you need to put what type of hardware you are using and then download the zip file and unzip it into the Config Folder ( This is where the file usually go)
DirectOutput\Config

Cool thank you! I'll give it a go when I have a chance, however, there doesn't seem to be a link in your reply.

Edited by emgroom, 12 October 2021 - 01:06 PM.

[Bosco]

Great Table

Im having a pin3dmd problem

 

The scoring is about 1/3 off the bottom of the Pin3DMD not showing the bottom part.

All other tables it is ok.

I redownloaded it same issue.

It is fine in a older version 1.0

Any Idea's or sugestions??

Edited by Bosco, 12 October 2021 - 01:40 PM.

[Outhere]

Great Table

Im having a pin3dmd problem

 

The scoring is about 1/3 off the bottom of the Pin3DMD not showing the bottom part.

All other tables it is ok.

I redownloaded it same issue.

It is fine in a older version 1.0

Any Idea's or sugestions??

Set this to False in the table script
Const FlexDMDHighQuality = False

[emgroom]

Super fun table!! Thanks JP. Does anyone else have absolutely no feedback (directoutput) most other tables it works fine its this and the space cadet one too. Thanks in advanced!

Have you downloaded new files from the DOF website lately

I'm sorry. I didn't elaborate further. I'm very new to dof and the whole vpin thing. I'm not sure where to look and what exactly to look for updated dof. I purchased the solenoid kit from Cleveland software and he included files which I installed. Thats as far as I've gotten.

You have to go to this website
Sign up then sign in and you need to put what type of hardware you are using and then download the zip file and unzip it into the Config Folder ( This is where the file usually go)
DirectOutput\Config

http://mjrnet.org/pi...ll-updates.html

Is this the site you were pointing to?

[emgroom]

Super fun table!! Thanks JP. Does anyone else have absolutely no feedback (directoutput) most other tables it works fine its this and the space cadet one too. Thanks in advanced!

Have you downloaded new files from the DOF website lately

I'm sorry. I didn't elaborate further. I'm very new to dof and the whole vpin thing. I'm not sure where to look and what exactly to look for updated dof. I purchased the solenoid kit from Cleveland software and he included files which I installed. Thats as far as I've gotten.

You have to go to this website
Sign up then sign in and you need to put what type of hardware you are using and then download the zip file and unzip it into the Config Folder ( This is where the file usually go)
DirectOutput\Config

http://mjrnet.org/pi...ll-updates.html

Is this the site you were pointing to?

So I downloaded this and installed and did everything I did before. And this table and a few others still don't have feed back. All others work...I'm still at a loss as to what is happening. Any help is greatly appreciated. Thank you!

[Outhere]

Go to the place where you're putting the new files
The files that you put there from the download delete them then try to run a game - no VP game should work

Edited by Outhere, 13 October 2021 - 03:03 AM.

[emgroom]

Go to the place where you're putting the new files
The files that you put there from the download delete them then try to run a game - no VP game should work

Yes. I originally unzipped the zipped download into the c:directouput folder. And nothing worked. I then made a shortcut of the directoutput folder and placed into the vpx plugin folder and still nothing worked. So I used the .msi and installed new the April 2021 update and dropped in doflinx (for fx3 and FP) and tried the config files provided to me from Cleveland software. And everything back to the way it was before. Most of the tables i have tested have feed back except the few I've mentioned at this point. Should i just completely skip dropping in the files from Cleveland software. Is that where I'm coming into the problem? I didn't have much time to really mess around too much. Late day from work and had to get to bed for the next early day. Thanks for your time.

[SmooveJY]

For what it's worth, I'm having the same problem with DOF on this table (and only this table).  My cab also has SSF, which works fine, but none of the solenoids are working.  And I did update my config file for DOF, which shows an entry for the table, but nothing happens.  (I also updated DOF, DOFLinx, VPX, and PinUp while I was at it, so everything is up to date now).

 

It's a great table, and I enjoy it tremendously with just the SSF, but I wish I could get my DOF working with it.

[Outhere]

 

For what it's worth, I'm having the same problem with DOF on this table (and only this table).  My cab also has SSF, which works fine, but none of the solenoids are working.  And I did update my config file for DOF, which shows an entry for the table, but nothing happens.  (I also updated DOF, DOFLinx, VPX, and PinUp while I was at it, so everything is up to date now).

 

It's a great table, and I enjoy it tremendously with just the SSF, but I wish I could get my DOF working with it.

 

If this is the game name in the table script and it's not working something isn't right on you're set up  -- Const cGameName = "jpsdeadpool"
jpsdeadpool
 

[SmooveJY]

 

 

For what it's worth, I'm having the same problem with DOF on this table (and only this table).  My cab also has SSF, which works fine, but none of the solenoids are working.  And I did update my config file for DOF, which shows an entry for the table, but nothing happens.  (I also updated DOF, DOFLinx, VPX, and PinUp while I was at it, so everything is up to date now).

 

It's a great table, and I enjoy it tremendously with just the SSF, but I wish I could get my DOF working with it.

 

If this is the game name in the table script and it's not working something isn't right on you're set up  -- Const cGameName = "jpsdeadpool"
jpsdeadpool
 

 

Thanks for the response -- it was definitely on my end.  Didn't drop my directoutputconfig.ini file in the right folder.  Fired right up and worked once I put it in the right place.

Such a great table with the physical feedback! 

[emgroom]

For what it's worth, I'm having the same problem with DOF on this table (and only this table).  My cab also has SSF, which works fine, but none of the solenoids are working.  And I did update my config file for DOF, which shows an entry for the table, but nothing happens.  (I also updated DOF, DOFLinx, VPX, and PinUp while I was at it, so everything is up to date now).
 
It's a great table, and I enjoy it tremendously with just the SSF, but I wish I could get my DOF working with it.

If this is the game name in the table script and it's not working something isn't right on you're set up  -- Const cGameName = "jpsdeadpool"
jpsdeadpool
 
 
Thanks for the response -- it was definitely on my end.  Didn't drop my directoutputconfig.ini file in the right folder.  Fired right up and worked once I put it in the right place.

Such a great table with the physical feedback!

You got working!! I'm still at a loss. This and a few other tables have no feedback. Could you point me in the right direction as to where this ini file is supposed to go? I tried fresh installing and am not getting this to work right for these few tables. Much thanks in advanced.

[SmooveJY]

 

 

 

For what it's worth, I'm having the same problem with DOF on this table (and only this table).  My cab also has SSF, which works fine, but none of the solenoids are working.  And I did update my config file for DOF, which shows an entry for the table, but nothing happens.  (I also updated DOF, DOFLinx, VPX, and PinUp while I was at it, so everything is up to date now).
 
It's a great table, and I enjoy it tremendously with just the SSF, but I wish I could get my DOF working with it.

If this is the game name in the table script and it's not working something isn't right on you're set up  -- Const cGameName = "jpsdeadpool"
jpsdeadpool
 
 
Thanks for the response -- it was definitely on my end.  Didn't drop my directoutputconfig.ini file in the right folder.  Fired right up and worked once I put it in the right place.

Such a great table with the physical feedback!

You got working!! I'm still at a loss. This and a few other tables have no feedback. Could you point me in the right direction as to where this ini file is supposed to go? I tried fresh installing and am not getting this to work right for these few tables. Much thanks in advanced.

 

 

I had to put my directoutputconfig20.ini file into my tables folder in the visual pinball directory (c:/visual pinball/tables, on my setup) to get it working.  I first put it in my direct output / config folder, but it didn't start working until it was also in my tables folder.

It was an eternity ago that I set up my direct output system and I barely remember how it was structured, so it's entirely possible that my setup is screwy and not a good example for anyone, but I figured it was at least worth mentioning to you in case it helps.

[emgroom]

For what it's worth, I'm having the same problem with DOF on this table (and only this table).  My cab also has SSF, which works fine, but none of the solenoids are working.  And I did update my config file for DOF, which shows an entry for the table, but nothing happens.  (I also updated DOF, DOFLinx, VPX, and PinUp while I was at it, so everything is up to date now).
 
It's a great table, and I enjoy it tremendously with just the SSF, but I wish I could get my DOF working with it.

If this is the game name in the table script and it's not working something isn't right on you're set up  -- Const cGameName = "jpsdeadpool"
jpsdeadpool
 
 
Thanks for the response -- it was definitely on my end.  Didn't drop my directoutputconfig.ini file in the right folder.  Fired right up and worked once I put it in the right place.

Such a great table with the physical feedback!

You got working!! I'm still at a loss. This and a few other tables have no feedback. Could you point me in the right direction as to where this ini file is supposed to go? I tried fresh installing and am not getting this to work right for these few tables. Much thanks in advanced.

I had to put my directoutputconfig20.ini file into my tables folder in the visual pinball directory (c:/visual pinball/tables, on my setup) to get it working.  I first put it in my direct output / config folder, but it didn't start working until it was also in my tables folder.

It was an eternity ago that I set up my direct output system and I barely remember how it was structured, so it's entirely possible that my setup is screwy and not a good example for anyone, but I figured it was at least worth mentioning to you in case it helps.

Ooh. I will give that a try. Thank you!! Glad it worked for you! Will report back. Lol

[emgroom]

So, putting the ini file in my tables folder did not do it. I really don't know where else to turn to. Thanks to all who chimed in.

[Bosco]

Great Table

Im having a pin3dmd problem

 

The scoring is about 1/3 off the bottom of the Pin3DMD not showing the bottom part.

All other tables it is ok.

I redownloaded it same issue.

It is fine in a older version 1.0

Any Idea's or sugestions??

Set this to False in the table script
Const FlexDMDHighQuality = False

 

 

Thank You that did the trick

[clanggedin]

I cannot get this table to run in 10.7. It crashes every time I try and run it. The Goonies works just fine though. I am running a 2 screen setup and the 1.06pup version. The puppack seems to load fine, but not the table. I get no errors either. I am not sure where to look as the script shows that flexdmd is set to false, which I had to change in order to get Goonies to run. Anything else I need to check?

[jpsalas]

I cannot get this table to run in 10.7. It crashes every time I try and run it. The Goonies works just fine though. I am running a 2 screen setup and the 1.06pup version. The puppack seems to load fine, but not the table. I get no errors either. I am not sure where to look as the script shows that flexdmd is set to false, which I had to change in order to get Goonies to run. Anything else I need to check?

 

The table runs fine under vpx 10.7 rev 338 (the latest beta). I don't know anything about the pup packs.